Huawei - locking TRX GSM

[sdineszi]

Hello,

I need to lock TRX in Huawei GSM, and I see two commands
a. DEA TRX
b. SET GTRXADMSTAT: IDTYPE=BYNAME, TRXNAME="Guam", ADMSTAT=Lock;

What is the difference between the 2 commands?
Also - which one of the will be soft power off - meaning no dropped calls from the TRX.

[samuraial]

Dear Sdineszi,

Hedex explanation on the SETGTRXADMSTAT:

Meaning: Administrative state of a TRX. When this parameter is set to Lock(Lock), a TRX is blocked. When this parameter is set to Shutdown(Shutdown), a TRX is shut down. When this parameter is set to Unlock(Unlock), a TRX is available.
For CS services:

When this parameter is set to Lock(Lock), a forced handover is triggered to hand the ongoing services on a TRX over to another TRX. The services will be interrupted if the handover fails.

When this parameter is set to Shutdown(Shutdown), the ongoing services on a TRX are not affected but new services are not allowed to access the TRX.

For PS services:

When this parameter is set to Lock(Lock) or Shutdown(Shutdown), the BSC interrupts the ongoing services on the TRX.

GUI Value Range: Lock(Lock), Unlock(Unlock), Shutdown(Shutdown)



DEA TRX:
Function
Use this command to deactivate a TRX.

Note
1. The BCCH TRX in a cell cannot be deactivated.

2. After a TRX is deactivated, it becomes unavailable, thus causing call drops on the TRX.


B/R


Hello,

I need to lock TRX in Huawei GSM, and I see two commands
a. DEA TRX
b. SET GTRXADMSTAT: IDTYPE=BYNAME, TRXNAME="Guam", ADMSTAT=Lock;

What is the difference between the 2 commands?
Also - which one of the will be soft power off - meaning no dropped calls from the TRX.

[ouedraogo2d]

Hi
samuraial (http://www.finetopix.com/member.php?15890-samuraial) and
sdineszi (http://www.finetopix.com/member.php?72702-sdineszi)
Please try to give me reputation as I give to you also.
Besause I need to be able to download in finetopix.
Thanks