uchok
2014-04-09, 02:29 AM
Hi thanks for the reply.
I've checked the counter but I don't see any value on the counter.
XXXX> pmx -m 1 . pmRaSuccTa
Object Counter 16:15 16:30 16:45 17:00
EUtranCellFDD=XXXX1 pmRaSuccTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
EUtranCellFDD=XXXX2 pmRaSuccTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
EUtranCellFDD=XXXX3 pmRaSuccTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
XXXX> pmx -m 1 . pmUeCtxtTa
Object Counter 16:15 16:30 16:45 17:00
EUtranCellFDD=XXXX1 pmUeCtxtTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
EUtranCellFDD=XXXX2 pmUeCtxtTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
EUtranCellFDD=XXXX3 pmUeCtxtTa 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0 0,0,0,0,0,0,0,0,0,0,0,0
Are you sure that's the right counter? Do you have any log on that counter that shows value?
Please note this enodeB does have traffic.
CellId #UE:s #Bearers
1 6 6
2 4 4
3 5 5
Hi,
please, check these out:
pmRaSuccTa ("Distribution of the measured Timing Advance value at random access.)
pmUeCtxtTa (Distribution of the measured Timing Advance value for UL synchronized UEs)
PDF ranges:
[0]: [0..9]%,
[1]: [10..19]%,
[2]: [20..29]%,
[3]: [30..39]%,
[4]: [40..49]%,
[5]: [50..59]%,
[6]: [60..69]%,
[7]: [70..79]%,
[8]: [80..89]%,
[9]: [90..99]%,
[10]: [100..109]%,
[11]: [110..200]%")
Meaning of %:
Periodically the actual TA of the UEs that are UL synchronized is monitored, one scan performed every 5 seconds. Example: When a sample is measured at 50% it means that an UL synchronized UE has a TA value at 50% of the configured cell range. In this case bin 6 for 50%..59% is increased.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.