PDA

View Full Version : when using GPRS , called no. is out of coverage ?!



sad_RNP
2014-02-17, 09:37 PM
Dear Expert

Pls your support for this problem

when using GPRS , the called MS receive message inform him (called no. is out of coverage) ?!

also may be this happen when using WIFI



pls your support to solve this problem


thanks

electron
2014-02-17, 10:09 PM
Hi,


CS page during using PS connection in GSM will be supported when tehre is optional link Gs interface between SGSN,MSC/VLR. There is no correlation between WiFi and paging in GSM/3G !


Cheers
Dear Expert

Pls your support for this problem

when using GPRS , the called MS receive message inform him (called no. is out of coverage) ?!

also may be this happen when using WIFI



pls your support to solve this problem


thanks

wolverine
2014-02-17, 10:28 PM
To add to what electron said, when a UE is using GPRS it cannot simultaneously listen to the paging channel. There are two ways around this, either via Gs or via the cheaper BSS Paging Co-ordination feature (no requirement for Gs interface). Ask your vendor about this.

dtvt2
2014-02-18, 01:57 PM
hi friend
- You can use feature: Paging Coordination or DTM
dtvt2

electron
2014-02-18, 02:06 PM
Hi,


Most likely DTM is activated in all network in the world these days. even through activating it Gs interface should be available in core network.


BR
hi friend
- You can use feature: Paging Coordination or DTM
dtvt2

Jerry
2014-02-18, 03:45 PM
you should check DTM feature it it is activated or not.

khurrambilal01
2014-02-18, 03:59 PM
Enable the feature: BSS Paging coordination then you would be able to receive paging without addition of Gs interface.