XPIC limits

[med_1990]

Hi All,

In 2+0 XPIC configuration the difference between vertical and horizontal should be in between 28 to 33. If this difference is more than 33, what is the effect of that on the link?

Thanks in advance

[ankarb]

Hi All,

In 2+0 XPIC configuration the difference between vertical and horizontal should be in between 28 to 33. If this difference is more than 33, what is the effect of that on the link?

Thanks in advance

What else? Degradation, that is worse SNR and lower Modulation.

[shabeeh]

Dear if I want to check hardware at Near End should I off both V and H transmitter at for end

[byja]

Didn't quite get the OP, is he asking what will happen to link if XPD is more than 33 dB? Normally, nothing should happen. That's like using HSX antennas on an XPIC link, for example.
However some radios do have problems when they completely lose the signal on the opposite pol. Not quite sure what happens with ML.

[med_1990]

Thank you byja for your reply