Antenna download patterns for Mentum Planet

[khaldounh]

Dears

Anyone can provide Antenna Pattren ( below list ) ??? i had many types of Patterns and need to download it, I found the way for Kathrrein but need the others as will, the files should be ".pafx"....




Antenna
Gain
Type
Manufacturer


DBXLH-6565
18.3
Outdoor Dual Band
Andrew


HBX-4517
19.1
Outdoor Narrow Beam
Andrew


HBX-6516
18
Outdoor 3G Only
Andrew


UMWD-6516
17.8
Outdoor 3G Only
Andrew


A19451803
17.7
Outdoor 3G Only
Huawei


ADU-451801
18
Outdoor Dual Band
Huawei


ATR4518R4
18.3
Outdoor Tri Band
Huawei


742-215
18
Outdoor 3G Only
Kathrein


742-223
17
Outdoor Dual Band
Kathrein


742-224
18.3
Outdoor Dual Band
Kathrein


742-266
18.3
Outdoor Dual Band
Kathrein


742-290
7
Micro BTS3902E
Kathrein


800-10137
2
Indoor
Kathrein


800-10173
2
Indoor
Kathrein


800-10748
2
Indoor (2.6GHz Support)
Kathrein


800-10360
17.6
Tri-Sector Pipe
Kathrein


800-10270
17.6
Tri-Sector Pipe
Kathrein


800-10439
21.2
Outdoor High Gain Antenna
Kathrein


TTB-709017
17.5
Outdoor Tri Band
Tongyu














thanks in advance

[electron]

Hi,

The logic for down tilting is same just get the vertical beam width antenna height and average serving area . That's it .


Cheers

[khaldounh]

Thanks for your quick support, but I need the patterns for Predictions as will as this may change the results somehow.

Please advise

[ptouray]

i hope this RFS pattern is useful.3484934849

[ptouray]

another Antenna pattern

[Stok3d]

Simply check the vendor website of whatever you're looking for and they'll have the patterns to download there:

Example:
http://www.cssantenna.com/patterns.html
http://www.amphenol-antennas.com/Pattern-Files.aspx
etc

[khaldounh]

Dears

First let me thank you all,

Second I have another assignment in LTE and I don't have any expe in LTE, but I believe it is easy for you (in case you know a little bit about LTE)



Increase Reference signal power to improve indoor coverage & utilize the available Radio power efficiently,

Please if you know the exact parameter in Mentum Planet that I should change, please let me know ....

Thanks

Khaldounh

[Stok3d]

As RSRP only focuses on the antenna in question and doesn't take into account the ever-so-important interference from neighboring sites with C/I, simply direct the boresight to the intended area of coverage and choose an antenna with a higher gain. To utilize radio power efficiently, use TMAs (which you can negate your Line Loss minus maybe a .17db from a jumper). You should thoroughly understand this as it's a big part of being in RF.

Improving C/I is a bit more involved, but above should satisfy the requirements to your question.

[Stok3d]

I'm making an assumption that you are using a correct tilt. Can you post a SS where you circle your intended area of coverage and a map with legend of RSRP overlaid from say -60 to -100? Is this an existing site you're working with or did you create your own centerline from a rawland?