View Full Version : Connection between 2 NPU's
aminmagherbi
2013-12-28, 07:40 PM
Hi, Here is the scenario: I have AMM TN 6P installed in the same RBS. I need to connect between 2 NPU's. Please Help.
ahmedze
2013-12-28, 10:04 PM
Hi aminmaghrebi,
You can connect them by lan cable,no need to configure;
aminmagherbi
2013-12-29, 04:36 PM
Hi,
Already done. But still can't connect to the second TN remotly .
I'm sure that i have to configure Port TR2 (LAN 1/7/2 on NPU) for both sides.
I need that configuration.
spatkad
2013-12-29, 04:44 PM
Hi,
Already done. But still can't connect to the second TN remotly .
I'm sure that i have to configure Port TR2 (LAN 1/7/2 on NPU) for both sides.
I need that configuration.
Please use some routing protocol either static or OSPF to connect both TNs i hope you have assigned ip addresses to both TNs.
ahmedze
2014-01-03, 04:34 AM
Hello,
I think there is no configuration to do,because i have same situation,so as spatkad said just verify your IP,subnetmask, and OSPF area must be stubby,
Share with us your config ,perhaps we can find a solution,
Regards
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.