Antenna Tributary Factor

[justdream]

Dears,

Do you know about Antenna Tributary Factor Parameters?
and its effect on Path balance

[Piscean21]

There are 2 tributaries i.e Antenna Tributary 0 & Antenna Tributary 1.

There are also 2 flags by the name Antenna Tributary Flag 0 & Antenna Tributary Flag 1.

If on a particular site TMA is active, then you need to enable these flags and set the proper attenuation factor otherwise you will be experiencing weak DL.


Attenuation factor= TMA gain-4.

For example, if TMA gain is 12 then you have to set Attenuation factor= 8.

Hope this helps.