LuisCo.
2013-07-15, 07:28 AM
Hello Experts could someone help me:
I am facing alarm, my situation is that the DUW6601 which use a magazine with a SUP controls external alarms, but the original thing is these:
On the site we are using PBC05, on it they install some times until 5 units some other time 4 units, units like, DUW3001, DUG2001(3 or 4), SIU and DUL, all of that in the same PBC including rectifiers, so the thing is on all the magazine that sometimes are 3, they controls alarms individually, the master unit is the DUG 900mhz, but also they have DUG 1800mhz that control alarms as well and the DUW3001(900mhz) which use an entire magazine also controls alarms, so sometimes I been having issues with the magazine on the DUG´s, raise alarm of Hardware Fault, Fan or Fan Group and the yellow led on the SUP that has a figure of fan is raised also, I have been check the fan´s on the back of the magazine and all are working, so I believe is an inconsistency of HW, because if a change the magazine between the one is used with the DUW, the alarm on the DUG is cleared, but is been transferred to the DUW, with the alarm: EnclosureProductDataMismatch with FanFailure, but the three fans on the back are working so what can be happened? then I made a change on the RBS Element Manager, on EquipmentSupportFunction=1 then on MO Properties I change: supportsystemControl: to false, then those two alarms get cleared, but then raise this alarm: Disconnected: Loss contact with the node control external alarms, so now I have this alarm on different Node B, and honestly is been tired no having a solution for it, could you help me with a solution on these cases.
Hope can give me a support, due I need it to get the network cleared.
Regards.
I am facing alarm, my situation is that the DUW6601 which use a magazine with a SUP controls external alarms, but the original thing is these:
On the site we are using PBC05, on it they install some times until 5 units some other time 4 units, units like, DUW3001, DUG2001(3 or 4), SIU and DUL, all of that in the same PBC including rectifiers, so the thing is on all the magazine that sometimes are 3, they controls alarms individually, the master unit is the DUG 900mhz, but also they have DUG 1800mhz that control alarms as well and the DUW3001(900mhz) which use an entire magazine also controls alarms, so sometimes I been having issues with the magazine on the DUG´s, raise alarm of Hardware Fault, Fan or Fan Group and the yellow led on the SUP that has a figure of fan is raised also, I have been check the fan´s on the back of the magazine and all are working, so I believe is an inconsistency of HW, because if a change the magazine between the one is used with the DUW, the alarm on the DUG is cleared, but is been transferred to the DUW, with the alarm: EnclosureProductDataMismatch with FanFailure, but the three fans on the back are working so what can be happened? then I made a change on the RBS Element Manager, on EquipmentSupportFunction=1 then on MO Properties I change: supportsystemControl: to false, then those two alarms get cleared, but then raise this alarm: Disconnected: Loss contact with the node control external alarms, so now I have this alarm on different Node B, and honestly is been tired no having a solution for it, could you help me with a solution on these cases.
Hope can give me a support, due I need it to get the network cleared.
Regards.