View Full Version : ATDI ICS Map Server 9.3.2 installer
zeuscane
2009-03-13, 11:21 PM
I share ICS Map File server 9.3.2.
The link is this:
[/URL][URL]http://rapidshare.com/files/295836150/ICS_map_server_9_5_1.rar (http://www.4shared.com/file/92364329/1630fc51/ICS_Map_Server_Setup.html)
For medicine ask in the forum
Regards
proy1_10
2009-03-14, 01:34 AM
Not founded medicine to Map server 9.3 in the forum!
raedsab
2009-03-14, 01:53 AM
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
but it's not the final medicine.
(missing the extra check at 054C6F, to fix, change 75 to EB) :D
raedsab
2009-03-14, 06:24 AM
We always need your advice PAL,
I have updated the above link with the new Medicine.
Thank you again DCA :p
but it's not the final medicine.
(missing the extra check at 054C6F, to fix, change 75 to EB) :D
freqzt
2009-03-14, 08:04 AM
Please check your PM. Thank you.
ps: do you have the manual?
raedsab
2009-03-14, 04:21 PM
I do not have the manual, but i can help if u have any question!
Please check your PM. Thank you.
ps: do you have the manual?
freqzt
2009-03-14, 07:32 PM
Is this can to make a building map? If yes, could you teach me how to make a building map using ICS Map Server?
raedsab
2009-03-14, 09:11 PM
What is the source / format of your data?
Is this can to make a building map? If yes, could you teach me how to make a building map using ICS Map Server?
freqzt
2009-03-14, 09:34 PM
How about if it is from a blank map? What is the format data that support with ICS telecom?
raedsab
2009-03-14, 10:43 PM
ICS supports a lot of raster and vector data formats.
-Images Format supported: TARGA 8-16-24 bits, TIFF, JPEG , BIL, MRSID + others
-Elevation data supported:
DTED, SDTS, DEM, Planet Elevation, Alcatel ASC, GRD, SRTM, BIL, ESRI ASCII DEM + others
If you want to build a fresh building map, you can start with 2D vector data representing the building contours/ footprint then extrude using the building height, here you can use any GIS software (like ArcGIS, Mapinfo, etc..) then you can rasterize this vector layer and import back this layer into ICS Map server where you can merge/ Edit / clip etc...
How about if it is from a blank map? What is the format data that support with ICS telecom?
freqzt
2009-03-15, 12:15 AM
ICS supports a lot of raster and vector data formats.
-Images Format supported: TARGA 8-16-24 bits, TIFF, JPEG , BIL, MRSID + others
-Elevation data supported:
DTED, SDTS, DEM, Planet Elevation, Alcatel ASC, GRD, SRTM, BIL, ESRI ASCII DEM + others
If you want to build a fresh building map, you can start with 2D vector data representing the building contours/ footprint then extrude using the building height, here you can use any GIS software (like ArcGIS, Mapinfo, etc..) then you can rasterize this vector layer and import back this layer into ICS Map server where you can merge/ Edit / clip etc...
Would you give me the tutorial how to make a fresh building map include the building height using ICS Map Server? I think the 3D of building map is important in radio network planning with high data rate where the delay spread is important to be calculate.
raedsab
2009-03-15, 12:45 AM
You are correct freqzt, i'll prepare one for you and I'll post it shortly
Would you give me the tutorial how to make a fresh building map include the building height using ICS Map Server? I think the 3D of building map is important in radio network planning with high data rate where the delay spread is important to be calculate.
raedsab
2009-03-15, 02:09 AM
Tools Needed:
1-ArcView 3.1 With 3d Analyst Extension (Installer is Attached PM for P@ss...)
2- ICS Mapserver
1- First We launch ArcView 3.1 and load 3D analyst by clicking on "File >> Extensions" and selecting 3d Analyst
2- Zoom to building View
3- Click on 'View' Menu >> New Theme >> Select Polygon
4- Select a filename >> OK
5- Use the "Draw Polygon" from the Drawing Bar and start drawing random buildings footprint.
6- Click on the left panel to select the new building layer we have just made
7- Click on "Theme" menu then on "Table"
8- Now click on "Table" menu then on "Start Editing" and assign a random height for each polygon, this number will be used to extrude the building to a certain Height
9- Now Click on "Table" Save edits
10-Now click on Layer again then on "Theme" >> "convert to 3D Shapefile"
11-Select 'Get Z value from attributes' to get the height you have just assigned for each building
12- Now load the new 3D Shapefile and click on "theme" >> Convert to Grid
13- Now load the new Grid file
14- Now select the new grid layer and click on file >> Export Data source and select ASCII raster
15- Launch ICS and click on "Import/Export" >> Import IC2 From >> ASCII Grid and you are done!
I have attached all files needed in this tutorial!
freqzt
2009-03-15, 07:49 AM
If we already have the buliding map with ic2 format, then how to convert it to building layer that support with ICS Telecom? Where the file extension is .BLG.
freqzt
2009-03-15, 09:10 AM
Can we use mapinfo to substitute arcview 3.1? Could you give us the tutorial if using mapinfo? Thank you.
venom
2009-03-15, 09:51 AM
I wonder PLANET takes the Clutter in grc format, how will ICS mapper will convert it the bin files of ASSET?
Raedsab helped me in converting the ASSET bin files in to grd which actually worked in PLANET but if i do the same thing with clutter then again .grd is made, what do you say raedsab?
raedsab
2009-03-15, 10:48 AM
Dear freqzt,
I saw a couple of ICS projects where buildngs are added to DEM layer using ICS Mapserver, I mean do not use .BLG for building and .IC2 for DEM, you can use ICS Mapserver and merge the building.ic2 and Heights.ic2 into one ic2 file. As you can see in the below image , I have the heights and buildings in one file that i can use in ICS telecom and get accurate Predications results but you need to have a high resolution DEM data for this to work (25, 20, 10 or higher).
If we already have the buliding map with ic2 format, then how to convert it to building layer that support with ICS Telecom? Where the file extension is .BLG.
raedsab
2009-03-15, 11:18 AM
We can use Mapinfo to replace Arcview but I use Vertical Mapper also
ftp://betaftp3.mapinfo.com/products/verticalmapper/:
Install Vertical Mapper and load into Mapinfo from Mapinfo Menu "tools" >> "Tools Manager"
In Mapinfo Make a new Table (file >> New Table)
Add a height Field
Draw the buildings footprint
Click in 'Table' Menu >> Update Column
Assign a Height for each building
Click on ''Vertical Mapper" >> Create Grid >> Region To Grid
Select the source Table and the Height column
Now load the new grid file into Mapinfo
click on ''Vertical Mapper" >> "show Grid Manager"
Now click on "Tools" in "Grid Manager" then on Export
Select "ASCII Grid Export (.txt)
Now import the New TEXT into ICS Mapserver using Import IC2 from ASCII Grid
Can we use mapinfo to substitute arcview 3.1? Could you give us the tutorial if using mapinfo? Thank you.
raedsab
2009-03-15, 11:36 AM
I wonder PLANET takes the Clutter in grc format, how will ICS mapper will convert it the bin files of ASSET?
Raedsab helped me in converting the ASSET bin files in to grd which actually worked in PLANET but if i do the same thing with clutter then again .grd is made, what do you say raedsab?
You can convert Asset Clutter bin file into Planet .GRC using ICS Mapserver but you need also Mapinfo and "Vertical Mapper". I'll show you how can this be done!
freqzt
2009-03-15, 12:06 PM
I already install arcview 3.1 but I can see "3D analysis" in "file >> extensions". Can you explain it?
raedsab
2009-03-15, 12:34 PM
I already install arcview 3.1 but I can see "3D analysis" in "file >> extensions". Can you explain it?
Add these extra files to ESRI folder, each in the appropriate directory (bin32, lib32, Ext32) then launch Arcview
http://rapidshare.com/files/209379196/extra.rar
raedsab
2009-03-15, 12:39 PM
Use ICS Mapserver to Import IC2 from Planet
Select first the Asset Clutter Index file
Then select the Asset clutter bin file
Now you have the IC2 file
Click on "Import/Export" >> Export IC2 to >> ASCII GRID
Launch Mapinfo and Load "Vertical Mapper"
Click on "vertical Mapper" >> Create Grid >> Import Grid
Select the .asc file we have exported from ICS Mapserver
Now enter the nodata value (it is the value for no data like -99999 etc..)
Now enter Meters or Feet for "Z value"
Load the New Grid file in Mapinfo
Now the file is in GRD format and need to be converted info GRC format to be used in Planet
Click on "Vertical Mapper" >> "Show Grid Manager"
Now Select the GRD layer from Grid Manager and click on tools >> Reclass
Now click on "Intervals" and Make sure that the Method Selected is "Interval"
Enter 1 in the Value and press ok twice and that is it, you have a GRC file that you an use in Planet.
I wonder PLANET takes the Clutter in grc format, how will ICS mapper will convert it the bin files of ASSET?
Raedsab helped me in converting the ASSET bin files in to grd which actually worked in PLANET but if i do the same thing with clutter then again .grd is made, what do you say raedsab?
freqzt
2009-03-15, 01:44 PM
Is arcview can open .jpeg? For example I have picture like below (scale 1:10000). I want to make a building using this picture as background. The shape of building is following the picture of building below. If it is possible, please let me know. Thank you.
raedsab
2009-03-15, 04:46 PM
Yes for sure, you can. Acrview supports JPG and TIFF.
you need to click on add theme icon on the bar then select "Image Data source" as the Data source types. If you have TIFF images you need to load the TIFF 6.0 Support Extension first.
Please note that if the image is not Geo-refrenced Arcview will load the image in an arbitrary location (Not the Exact Location), you need a .JGW world file that will tell arcview where to place the image and what coordinate system transformation. If you need to Geo-reference and produce the associated World file you need at least 4 known points with known Coordinates. You can use Blue Marble Desktop application to do this job.
http://rapidshare.com/files/191926231/BMGDesktop1.1.0.exe
Is arcview can open .jpeg? For example I have picture like below (scale 1:10000). I want to make a building using this picture as background. The shape of building is following the picture of building below. If it is possible, please let me know. Thank you.
famox
2009-03-15, 05:07 PM
Help me my friend and give the password
freqzt
2009-03-15, 05:18 PM
http://rapidshare.com/files/191926231/BMGDesktop1.1.0.exe
This file evaluation only or already cr@cked? Thank you.
raedsab
2009-03-15, 05:39 PM
famox & freqzt Please check your PM
This file evaluation only or already cr@cked? Thank you.
venom
2009-03-15, 07:26 PM
Dear bruv,
I appreciate your knowledge and help, In x-wizard my 600+ files has been converted in to single clutter and elevation file, but unfortunately the procedure which you defined for PLANET converts 1 bin file in to 1 .grd file. So if i try to convert the the complete bin files of my country then it is obviously large data and too many .grd files. I want 1 .grd and 1 .grc files for all 600 bin files, do you know a way to combine all these files ?
Use ICS Mapserver to Import IC2 from Planet
Select first the Asset Clutter Index file
Then select the Asset clutter bin file
Now you have the IC2 file
Click on "Import/Export" >> Export IC2 to >> ASCII GRID
Launch Mapinfo and Load "Vertical Mapper"
Click on "vertical Mapper" >> Create Grid >> Import Grid
Select the .asc file we have exported from ICS Mapserver
Now enter the nodata value (it is the value for no data like -99999 etc..)
Now enter Meters or Feet for "Z value"
Load the New Grid file in Mapinfo
Now the file is in GRD format and need to be converted info GRC format to be used in Planet
Click on "Vertical Mapper" >> "Show Grid Manager"
Now Select the GRD layer from Grid Manager and click on tools >> Reclass
Now click on "Intervals" and Make sure that the Method Selected is "Interval"
Enter 1 in the Value and press ok twice and that is it, you have a GRC file that you an use in Planet.
raedsab
2009-03-15, 08:01 PM
No problem my friend, the forum was made to help each other.
For sure you can combine all the files in one using ICS Mapserver.
- Lauch ICS and convert all bin files into IC2.
- Click on "Disk Option Menu" >> Create Blank Matrix >> From Files list
- Select "16 bit files" and then select all ic2 files you have converted
- Enter Blank Matrix Name and make sure you have selected "16 bit files" again
-Now the Matrix is blank and it does not contain any data, it contains only the Geographic Extends of the new Matrix file.
-To fill the blank matrix, we need to select all files again using the next steps
- Click on "Disk Option Menu" >> Insert Files, then select the blank Matrix we have just made
- Make sure thay "Src + Dst" is not selected
- Click on "select Files" and select all converted ic2 files again
- click Now on "Insert" and you are done!
The new Matrix is now an IC2 file and contains all the converted files and you can follow all the procedures posted before!
Dear bruv,
I appreciate your knowledge and help, In x-wizard my 600+ files has been converted in to single clutter and elevation file, but unfortunately the procedure which you defined for PLANET converts 1 bin file in to 1 .grd file. So if i try to convert the the complete bin files of my country then it is obviously large data and too many .grd files. I want 1 .grd and 1 .grc files for all 600 bin files, do you know a way to combine all these files ?
venom
2009-03-15, 08:13 PM
Raedsab, i'll try it and if i have any question i'll pm u, thanks for sharing your knowledge here bruv :)
y7ariche
2009-03-15, 08:21 PM
how to use mapserver to import map ( .GEO and .IMG) from internet
i have followed :
import/export ->online worlwide builder, but i think we have to login to access to atdi ftp server ,doesn't it?
raedsab
2009-03-15, 08:52 PM
I think It is for registered users only!
how to use mapserver to import map ( .GEO and .IMG) from internet
i have followed :
import/export ->online worlwide builder, but i think we have to login to access to atdi ftp server ,doesn't it?
raedsab
2009-03-16, 02:48 AM
@y7ariche
Free DEM from here ftp://e0srp01u.ecs.nasa.gov/srtm/
version 1 is US only
version 2 is global
SRTM 90m Digital Elevation Data
http://srtm.csi.cgiar.org/index.asp
how to use mapserver to import map ( .GEO and .IMG) from internet
i have followed :
import/export ->online worlwide builder, but i think we have to login to access to atdi ftp server ,doesn't it?
vivainter
2009-03-16, 05:47 PM
Someone have manuals ( any version) for ATDI ICS MAP ?
Thanks
famox
2009-03-16, 06:38 PM
Please, who can tell me how to convert SRTM 3 SEC to HTZ geo files?
I try Map Server 9.5.1 and when I use "Import IC2 from" "srtm HGT 3 sec", I can not open hgt file.
please I need your help my friend. I want to use hgt file whith ICS Telecom 8.7.7 .
Thanks.
freqzt
2009-03-16, 06:53 PM
Please, who can tell me how to convert SRTM 3 SEC to HTZ geo files?
I try Map Server 9.5.1 and when I use "Import IC2 from" "srtm HGT 3 sec", I can not open hgt file.
please I need your help my friend. I want to use hgt file whith ICS Telecom 8.7.7 .
Thanks.
You can try global mapper to convert SRTM to geo. But you must install ATDI plugin first. You can get both of installer here.
raedsab
2009-03-16, 10:03 PM
@famox,
There is a small script that you can run in Arcview to import srtm into grid Then use Arcview to convert the grid to ASCII
Then use ICS to convert ASCII into IC2 or GEO
(Arcview needs to load 3d & spacial analyst first )
famox
2009-03-17, 03:54 AM
I have this error message all the time when I execute the scrpit :
Unrecognised object : Grid
Help me please.
raedsab
2009-03-17, 04:08 AM
Make sure that 3d analyst and Spatial analyst extensions are loaded.
if the error occurs again re-run the script!
I have tested the script and it is working fine!
I have this error message all the time when I execute the scrpit :
Unrecognised object : Grid
Help me please.
famox
2009-03-17, 04:26 AM
How I can be sure that 3d analyst and Spatial analyst extensions are loaded?
thanks
raedsab
2009-03-17, 04:48 AM
Go to File Menu >> Extensions
Check on "3D Analyst"
Check on "Spatial Analyst"
Click right on "Make Default" for Arcview to load these extensions each time!
How I can be sure that 3d analyst and Spatial analyst extensions are loaded?
thanks
kilmister
2009-03-17, 05:27 PM
thanks ! g00d work ! more atdi stuff.
famox
2009-03-17, 08:39 PM
Please, where I can download ArcGis Spatial Analyst?
help please
famox
2009-03-17, 09:16 PM
@raedsab
Please, where I can download ArcGis Spatial Analyst?
help please
raedsab
2009-03-17, 09:26 PM
@raedsab
Please, where I can download ArcGis Spatial Analyst?
help please
I posted this earlier in this post, anyway Add these extra files to ESRI folder, each in the appropriate directory (bin32, lib32, Ext32) and you are done ! http://rapidshare.com/files/209379196/extra.rar (http://rapidshare.com/files/209379196/extra.rar)
famox
2009-03-17, 10:12 PM
@rasetab
Please the password Arcview3.1.rar?
raedsab
2009-03-17, 11:37 PM
@famox check you PM
@rasetab
Please the password Arcview3.1.rar?
jammerito
2009-03-18, 02:03 AM
Hi all,
I made a quick search in internet for some docs for map server!
Look what I found!
http://www.4shared.com/file/93431522/c1231d25/WP0705_Exporting_results_ICStelecom_V01.html
http://www.4shared.com/file/93431829/5e2957fe/wp_mobile_lte_icstelecom.html
If anyone has the documentation for this product please share!
BR,
Share the knowledge!
famox
2009-03-18, 02:10 AM
Please when I try to convert hgt file to ascii file, I get all the time :
cannot make GTheme from grid, grid has error
help me please
raedsab
2009-03-18, 03:08 AM
can you share the hgt file so i can check it out!
Please when I try to convert hgt file to ascii file, I get all the time :
cannot make GTheme from grid, grid has error
help me please
famox
2009-03-18, 03:18 AM
YOU FIND HERE THE HGT FILE
THANKS
raedsab
2009-03-18, 05:04 AM
OK here is the trick:
First Launch Arcview 3.1 with 3d & spatial analyst loaded
click on left bar >> Scripts
Paste the hgt2grd script
Click on "Compile" Icon
now click on the Left Bar again >> Views
A new view "view1" appears
Now click back on the hgt2grd script windows
Now click on "Run" Icon
A customize windows appears >> close it and you are done!
YOU FIND HERE THE HGT FILE
THANKS
famox
2009-03-19, 12:48 AM
@raedsab
I try but witout success !!!!!!!
I know that I'm new to arcgis, so please can you upload your arcgis release and the utility used.
mabe my release is diffrent for your release.
thanks
raedsab
2009-03-19, 01:27 AM
It is not a matter of different releases, if 3d & Spatial analyst is loaded then the procedure has to work.
i'll prepare a visual tutorial for you to check if there are missing steps, please wait!
@raedsab
I try but witout success !!!!!!!
I know that I'm new to arcgis, so please can you upload your arcgis release and the utility used.
mabe my release is diffrent for your release.
thanks
famox
2009-03-19, 01:47 AM
so please, how To use Arcview to convert the grid to ASCII ?
raedsab
2009-03-19, 02:41 AM
so please, how To use Arcview to convert the grid to ASCII ?
Click on the Grid Layer in the "left Bar"
Click on "File" Menu >> Export Data Source
Select "ASCII Raster" as the export files Type
Now you can use the output file in IC2
famox
2009-03-20, 12:57 AM
@raedsab
Thanks you for your help but please I do the conversion like this :
1. Esri ascii ----> ic2
2. ICS map server matrix file ------> ascii file
3. ascii file -----> geo file under ICS telecom
then the geoi file when tested under ICS file, the result is rong data.
So please can you help me
raedsab
2009-03-20, 02:13 AM
Hello Here are the correct Steps
if you have one DEM file
-Esri ascii >> ic2
-Rename .ic2 to .geo
-Use .geo in ICS telecom
if you have multiple DEM files
-Esri ascii files >> ic2 files
-Merge ic2 files into one ic2 file using :
Create blank Matrix >> from files
Insert files >> Select all ic2 files into the blank ic2 file
-Rename .ic2 to .geo
-Use .geo in ICS telecom
@raedsab
Thanks you for your help but please I do the conversion like this :
1. Esri ascii ----> ic2
2. ICS map server matrix file ------> ascii file
3. ascii file -----> geo file under ICS telecom
then the geoi file when tested under ICS file, the result is rong data.
So please can you help me
budo8002
2009-03-23, 02:22 AM
I share ICS Map File server 9.3.2.
The link is this:
http://www.4shared.com/file/92364329/1630fc51/ICS_Map_Server_Setup.html
For medicine ask in the forum
Regards
need medicine
TNKs
freqzt
2009-03-23, 02:41 AM
need medicine
TNKs
The medicine is here (http://www.finetopix.com/showpost.php?p=42152&postcount=3).
bikplaboi
2009-04-08, 08:34 AM
Thanks for that,,,
Can you share ArcView installer with license please, I don't have it... Only have Global Mapper and MapInfo 8.5
Thanks in advance for anyone who can share ArcView GIS 3.1, really need to do some data conversion etc....
Thanks All,,,,
:D
@famox,
There is a small script that you can run in Arcview to import srtm into grid Then use Arcview to convert the grid to ASCII
Then use ICS to convert ASCII into IC2 or GEO
(Arcview needs to load 3d & spacial analyst first )
freqzt
2009-04-08, 08:54 AM
Thanks for that,,,
Can you share ArcView installer with license please, I don't have it... Only have Global Mapper and MapInfo 8.5
Thanks in advance for anyone who can share ArcView GIS 3.1, really need to do some data conversion etc....
Thanks All,,,,
:D
I think ArcView GIS 3.1 is available here. Just search it here buddy. Maybe in this thread.
raedsab
2009-04-08, 02:29 PM
freqzt is right it is here, check these posts
http://www.finetopix.com/showpost.php?p=42249&postcount=15
http://www.finetopix.com/showpost.php?p=42264&postcount=23
Thanks for that,,,
Can you share ArcView installer with license please, I don't have it... Only have Global Mapper and MapInfo 8.5
Thanks in advance for anyone who can share ArcView GIS 3.1, really need to do some data conversion etc....
Thanks All,,,,
:D
raedsab
2009-04-12, 01:27 AM
If you plan to use ics telecom and you need to have the DEM and IMG Map in the same resolution you can use ICS Mapserver to Resample the DEM or the .IMG Map to the same resolution.
-Open Countour Treatment Menu >> Open Disk Session
-Choose the DEM or IMG file
-Click on Resample Icon
-choose Resampling factor
A useful guide to teach us how to use different resolution map in a atdi telecom dem=25 meter ,,,geo format image=1 meter;;;; img format plz help me icstelecom give me error map incompatibilitti????????????
mouradtc
2009-04-12, 08:44 AM
HELLO
i have installed the ATDI ics map server 9 but after the run programme i have the message: dongel not found or limit exceeded , please any one can help me ?
thanks
raedsab
2009-04-12, 10:36 AM
Have you downloaded the file here :
http://www.finetopix.com/showpost.php?p=42152&postcount=3
HELLO
i have installed the ATDI ics map server 9 but after the run programme i have the message: dongel not found or limit exceeded , please any one can help me ?
thanks
mouradtc
2009-04-13, 06:26 AM
Have you downloaded the file here :
http://www.finetopix.com/showpost.php?p=42152&postcount=3
NO because i d'nt have permission to download file directly , can you please share the file with link
thanks
raedsab
2009-04-13, 06:39 AM
@mouradtc, Here is the link for med****: http://rapidshare.com/files/208888788/icsw.rar
Mirror: http://www.megaupload.com/?d=AJRZZK0P
NO because i d'nt have permission to download file directly , can you please share the file with link
thanks
mouradtc
2009-04-13, 07:26 AM
@mouradtc, Here is the link for med****: http://rapidshare.com/files/208888788/icsw.rar
Mirror: http://www.megaupload.com/?d=AJRZZK0P
thanks my friend , please give me the password
val2032
2009-04-13, 09:36 PM
thanks my friend , please give me the password
without password:
hxxp://rapid share.com/files/220797595/PACK.7z.html
Remember: For educational use ONLY! If you like the software, please BUY IT !
PS. If you consider usefull this post, please add my reputation
slavun
2009-05-31, 04:22 AM
May I have the password, please?
slavun
2009-06-02, 07:41 PM
Anyone have manual?
zeuscane
2009-06-02, 07:51 PM
Available only version 7
http://www.finetopix.com/showpost.php?p=43150&postcount=1
bye
Inception
2009-06-04, 10:11 PM
hi pass word plz
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
zeuscane
2009-06-04, 10:31 PM
Lavin80 has chosen not to receive private messages.
No private messages no party.
Bye
hi pass word plz
anshul7312
2009-06-19, 01:37 PM
Link is not working it's limit has crossed...can anyone upload the working links.:(
anshul7312
2009-06-19, 01:38 PM
without password:
hxxp://rapid share.com/files/220797595/PACK.7z.html
Remember: For educational use ONLY! If you like the software, please BUY IT !
PS. If you consider usefull this post, please add my reputation
the above link is not working can u upload the working links......
sherbov
2009-06-22, 12:34 PM
Please upload again
Armagadon
2009-06-22, 04:42 PM
Can you upload the installer of ATDI ICS Map Server again? The link is not working...
voipsoftswitch
2009-06-23, 02:02 AM
HELLO
this is the link:http://rapidshare.com/files/247429826/ICS_Setup.msi.html
please dont forget tanks and add reputation
BS
jason182
2009-07-13, 02:19 AM
please the PW for ICS map server i can not run the softwah they need dongle !!!!
zeuscane
2009-07-13, 03:18 AM
No PW only medicine here:
http://www.finetopix.com/showpost.php?p=45501&postcount=69
Enjoy
please the PW for ICS map server i can not run the softwah they need dongle !!!!
jason182
2009-07-13, 03:34 AM
I need PW to extract file please the PW
kartiack
2009-07-22, 11:33 PM
please the PW
akul2
2009-08-01, 04:29 AM
thank you!
lejun
2009-08-01, 09:13 AM
Hi,
Link is dead, Please upload again.:mad:
Thanks
voipsoftswitch
2009-08-02, 11:09 PM
HELLO
sorry for delay
this is the link:http://rapidshare.com/files/262868465/ICS_Setup.msi.html
please if you want tanks and add reputation
BR
hassen
2009-08-03, 01:44 AM
No PW only medicine here:
http://www.finetopix.com/showpost.php?p=45501&postcount=69
Enjoy
hi my friend
i saw the medicine is protected by pw
could you fix the problem
thanks in advance
br hassen
zeuscane
2009-08-03, 02:27 AM
Clean yours PM
hassen has exceeded their stored private messages quota and cannot accept further messages until they clear some space
hi my friend
i saw the medicine is protected by pw
could you fix the problem
thanks in advance
br hassen
hassen
2009-08-03, 03:46 AM
Clean yours PM
hassen has exceeded their stored private messages quota and cannot accept further messages until they clear some space
thank you my bro
now it is ok
hassen
miladsafaei
2009-08-16, 12:50 PM
Dear raedsab (http://www.finetopix.com/member.php?u=2793),
Would you please send the medicine link to my email: m.ghaem@danialkia.net
Thank you very much in advance.
miladsafaei
2009-08-16, 01:01 PM
Thanks a lot.
Please give me the password.
jason182
2009-08-16, 05:12 PM
Link is dead please can upmoad it again ? and we need PW to extract file
Thank you
raedsab
2009-08-19, 07:17 AM
P@ssW0rds are sent by PM :p
Link is dead please can upmoad it again ? and we need PW to extract file
Thank you
gnrladel
2009-09-04, 11:42 PM
hi all,
i need a digitale map for a building , to do my study on , please if some one have building digitale floor plan , or at least how can i do that ,,????
gnrladel
2009-09-06, 10:19 PM
hi all,
i need a digitale floor plan of a building , to do my study on , please if some one have one or at least how can i do that ,,????
gnrladel
2009-09-06, 10:20 PM
hi all,
i need a digitale floor plan of a building , to do my study on , please if somebody have one , or at least how can i do that ,,????
gnrladel
2009-09-06, 10:24 PM
I do not have the manual, but i can help if u have any question!
hi all,
i need a digitale floor plan for a building , to do my study on , please if somebody have one, or at least how can i do that ,,????
aosan
2009-09-07, 02:22 AM
I share ICS Map File server 9.3.2.
The link is this:
http://www.4shared.com/file/92364329/1630fc51/ICS_Map_Server_Setup.html
For medicine ask in the forum
Regards
please, can you download ICS_Map_Server_Setup again.
thanks alot
gnrladel
2009-09-14, 11:39 AM
how can i import a google earth "building model"or a map to ics map server , especialy that building models are .skp
@mouradtc, Here is the link for med****: http://rapidshare.com/files/208888788/icsw.rar
Mirror: http://www.megaupload.com/?d=AJRZZK0P
I clicked on the plus button and reputation thanks could you send me the password for this file ;)
Inception
2009-10-03, 04:47 PM
thanks said and reputation added
pass plz
br
lavin
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
FUNMOBILE
2009-10-06, 02:56 AM
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
Hello raedsab,
can u please share me rapidshare link an pwd.
Thanks for your time.
Regards
edinburgh
2009-10-21, 11:56 AM
May I get the installer first. (RS link )
Thanks.
BR,Edin
zeuscane
2009-10-21, 04:13 PM
Try now
zeuscane
May I get the installer first. (RS link )
Thanks.
BR,Edin
tester
2009-11-07, 09:49 PM
I share ICS Map File server 9.3.2.
The link is this:
http://rapidshare.com/files/295836150/ICS_map_server_9_5_1.rar
For medicine ask in the forum
Regards
zeuscane
What is the version of Map Server?
zeuscane
2009-11-07, 09:57 PM
The version of Map Server is the 9.5.1 since the medicine is for this version.
zeuscane
zeuscane
What is the version of Map Server?
tester
2009-11-07, 10:05 PM
Please send me the pass for med
jasan
2009-12-23, 07:39 PM
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
i can't download .
could you pls upload to 4shared
calvin
2009-12-26, 05:32 PM
Can you please give me the download link for ICS mapserver?
nick80j
2009-12-26, 09:26 PM
try this
http://www.4shared.com/file/135833453/4518c667/ICS_Setup.html
calvin
2009-12-26, 10:08 PM
try this
http://www.4shared.com/file/135833453/4518c667/ICS_Setup.html
Thank you very much nick80j!
calvin
2009-12-26, 11:32 PM
Please send me the pass for med
can someone give the pass for the med pls? pls. PM
des118
2009-12-27, 01:27 AM
Hi Nick80j , plz send me the pass to email : bastian.luong@gmail.com
Thanks & Best regards
nmplanner
2009-12-27, 03:38 AM
Dear all if possible please share a survey on different map specs for different softwares and also how to convert them into each other
thanks
ANTRF
2009-12-30, 08:53 AM
The Version posted is 9.8.12
who can post the link of medicine?
thanks
ANTRF
ANTRF
2010-01-01, 03:21 AM
please who can send me the password of medicine
http://rapidshare.com/files/208888788/icsw.rar
thanksss
ANTRF
2010-01-01, 04:16 AM
Who work with DTM and DEM files: Surfer is the best
convertor of altimetric files.
this is the last version.
http://hotfile.com/dl/21759447/41b2096/Golden.Software.Surfer.v9.8.669.Incl.Keygen-EAT.rar.html
happy new year
ANTRF
I post all without password, at least a thanks please.
ANTRF
2010-01-01, 04:37 AM
Who work with Telecom another gift.
This is The EDX converter
convert:Terrain, Clutter, Building and other files.
Best regards for all
ANTRF
I post all without password, at least a thanks please.
ANTRF
2010-01-02, 03:22 AM
Please can you send me the password
medicine and file of ICS Map Srever
happy new year
Thanks
ANTRF
Tools Needed:
1-ArcView 3.1 With 3d Analyst Extension (Installer is Attached PM for P@ss...)
2- ICS Mapserver
1- First We launch ArcView 3.1 and load 3D analyst by clicking on "File >> Extensions" and selecting 3d Analyst
2- Zoom to building View
3- Click on 'View' Menu >> New Theme >> Select Polygon
4- Select a filename >> OK
5- Use the "Draw Polygon" from the Drawing Bar and start drawing random buildings footprint.
6- Click on the left panel to select the new building layer we have just made
7- Click on "Theme" menu then on "Table"
8- Now click on "Table" menu then on "Start Editing" and assign a random height for each polygon, this number will be used to extrude the building to a certain Height
9- Now Click on "Table" Save edits
10-Now click on Layer again then on "Theme" >> "convert to 3D Shapefile"
11-Select 'Get Z value from attributes' to get the height you have just assigned for each building
12- Now load the new 3D Shapefile and click on "theme" >> Convert to Grid
13- Now load the new Grid file
14- Now select the new grid layer and click on file >> Export Data source and select ASCII raster
15- Launch ICS and click on "Import/Export" >> Import IC2 From >> ASCII Grid and you are done!
I have attached all files needed in this tutorial!
Please give me password
marjant
2010-01-13, 12:09 AM
pls, can anyone send me the password for the ICS Map server medicine !!
thorrman
2010-01-15, 07:41 PM
please who can send me the password of medicine
http://rapidshare.com/files/208888788/icsw.rar
thanksss
hello!
Please send me PM med for http://rs669.rapidshare.com/files/208888788/icsw.rar
It is ver 9.5.1?
Thank you
thorrman
2010-01-15, 07:54 PM
hello!
Please send me PM med for http://rs669.rapidshare.com/files/208888788/icsw.rar
It is ver 9.5.1?
Thank you
zeuscane
2010-01-15, 08:17 PM
It suits you to use the new version
http://www.finetopix.com/showpost.php?p=61188&postcount=4
and the new medicine posted by val2032
http://rapidshare.de/files/48695505/icsw-fixed.zip.html
Regards
zeuscane
hello!
Please send me PM med for http://rs669.rapidshare.com/files/208888788/icsw.rar
It is ver 9.5.1?
Thank you
thorrman
2010-01-15, 08:41 PM
It suits you to use the new version
http://www.finetopix.com/showpost.php?p=61188&postcount=4
and the new medicine posted by val2032
http://rapidshare.de/files/48695505/icsw-fixed.zip.html
Regards
zeuscane
Thank you! Work wery well!
bojo06
2010-02-07, 09:34 PM
I need tne pass to extract the file, please!
fvillar
2010-02-12, 08:53 AM
Thank you very much!
Could you reupload the medecine?
kumaraaa
2010-02-22, 07:26 PM
Thanks. Can you please send me the password.
Thanks again!!
bojo06
2010-03-02, 03:25 AM
Where can I find the pass about med..?:L:L:L
Please somebody to send me.
zeuscane
2010-03-02, 03:55 AM
See this post:
http://www.finetopix.com/showpost.php?p=65436&postcount=126
Regards
zeuscane
Where can I find the pass about med..?:L:L:L
Please somebody to send me.
bojo06
2010-03-02, 04:06 AM
I found your post, but http://rapidshare.de/files/48695505/icsw-fixed.zip.html
doesn't work!
val2032
2010-03-02, 07:24 AM
Medicine re-uploaded
http://www.megaupload.com/?d=YYKCOHB4
headpointer
2010-03-02, 03:52 PM
thank you for help us
bojo06
2010-03-02, 05:10 PM
Thanks! It's OK!
zeuscane
2010-03-02, 08:31 PM
Hi val2032,
This patch is for ATDI HTZ Warfare 14.6.9 is not for Map Server.
regards
zeuscane
Medicine re-uploaded
http://www.megaupload.com/?d=YYKCOHB4
val2032
2010-03-02, 08:57 PM
Hi val2032,
This patch is for ATDI HTZ Warfare 14.6.9 is not for Map Server.
regards
zeuscane
are you sure ? I think is for Map Server 9.8.12
BR
doppiaemme
2010-03-03, 02:24 AM
are you sure ? I think is for Map Server 9.8.12
BR
I get the error "Can't locate file" even if it seems to be looking for the right file...
any hints?
mrshiny
2010-03-06, 03:14 PM
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
hi
send me the link and pass please
mrshiny
2010-03-06, 03:22 PM
Who work with Telecom another gift.
This is The EDX converter
convert:Terrain, Clutter, Building and other files.
Best regards for all
ANTRF
I post all without password, at least a thanks please.
nice
thanks a lot
mrshiny
2010-03-06, 05:11 PM
Thank you zeuscane for the installer!
Here you go:
***PM for passw@rd
it is a PM :D
;)
a.younes
2010-03-16, 06:51 PM
Can someone please PM me the password for the medicine of ICS Map Server?
Thanks
val2032
2010-03-16, 07:03 PM
Can someone please PM me the password for the medicine of ICS Map Server?
Thanks
med (for mapserver v9.8.12) here, without password:
http://www.megaupload.com/?d=YYKCOHB4
borelij
2010-07-26, 09:19 PM
Med not working?
Said: can't locate file
HELLO
i have installed the ATDI ics map server 9812, than i patched it, but after the 5 minutes run programe i have the message: dongel not found, and program is closed. Please anyone knows what is going on? Could somebody help me? thank you in advance.
Can somebody upload working version of Mapserver and medi******?
proy1_10
2010-09-20, 03:26 AM
@tpkj
Can you say us wich med have you used?
zeuscane
2010-09-20, 03:32 AM
Perhaps it is not the correct med, my program correctly works in version 9.8.12
zeuscane
@tpkj
Can you say us wich med have you used?
for med...... I have used :
http://www.megaupload.com/?d=YYKCOHB4
Zeuscane, for application i have used:
http://rapidshare.com/files/30793881...is_v9.8.12.rar
If something is wrong or mixed by me, please guide me or send (upload somewhere) correct application and (or) med…..
Thank you guys in advance.
proy1_10
2010-09-26, 01:17 AM
Please, anyone can upload correct med to 9.8.12?
Med posted by val032 is a trojan!!!
val2032
2010-11-01, 04:44 AM
Please, anyone can upload correct med to 9.8.12?
Med posted by val032 is a trojan!!!
it is NOT virus/trojan. it is appears as suspicious file, like trojan.
Please check it at VirusTotal - Free Online Virus, Malware and URL Scanner (http://www.virustotal.com) and see the score.
Optim
2010-11-01, 03:02 PM
Hi all,
The install file was deleted, can any one re-upload it.
Rachid.
zeuscane
2010-11-01, 05:46 PM
This is link for 9.8.12
http://rapidshare.com/files/307938812/ICS_Map_Server_bis_v9.8.12.rar
B.Rs.
zeuscane
Hi all,
The install file was deleted, can any one re-upload it.
Rachid.
vivainter
2010-11-01, 06:28 PM
Version 10.5.1 is available on the forum
Optim
2010-11-01, 07:15 PM
Thanks:)
Best Regards.
val2032
2010-11-01, 08:18 PM
Version 10.5.1 is available on the forum
Where? Can you post the link, please?
BR,
val
babeka
2010-11-01, 08:40 PM
Where? Can you post the link, please?
BR,
val
http://www.finetopix.com/fobidden-city/12635-i_c_s-m-pserv-r-lastest-version.html
BR
babeka
freakturd06
2010-11-09, 01:46 AM
This is link for 9.8.12
http://rapidshare.com/files/307938812/ICS_Map_Server_bis_v9.8.12.rar
B.Rs.
zeuscane
Hi master zeus,
Please provide mirror in 4shared. I can't download using rapidshare. Also kindly,provide working med if not to much to ask.:D
zeuscane
2010-11-09, 01:52 AM
New version is in depositfiles.com.
Regards
zeuscane
Hi master zeus,
Please provide mirror in 4shared. I can't download using rapidshare. Also kindly,provide working med if not to much to ask.:D
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.