View Full Version : Wlscgen 8.3 problem
babak1349
2013-04-01, 06:30 AM
Hello,
when I am running Wlscgen, i can see the following error
32129
I am using win 7 32 bits.
Anybody knows what could be the potential problem ?
Best Regards
P.T.E.
2013-04-01, 06:38 AM
you should have Sentinel RMS Tool kit, which is hard to fined :L
zeuscane
2013-04-01, 06:46 AM
you need emulator or undongleWlscgen 8.3
zeuscane
babak1349
2013-04-01, 07:53 AM
Hello ZeusCane,
Thanks for hint. Do you know how I can undongle wlscgen in a simple way or from where I can get one ?
I appreciate your suggestions
Cheers
you need emulator or undongleWlscgen 8.3
zeuscane
babak1349
2013-04-01, 08:43 AM
Hi Guys,
I found the emulator for Wlscgen 8.2 and it works for version 8.3 I attached the emulator for who has the same problem It might be posted before in finetopix but I post it again as an update
thank you all for your support
babak1349
2013-04-02, 05:42 PM
Hi All,
Maybe a lot of people knows about my comments below But for me it was new So in order to share the knowledge I mention it
In wlsgen version higher than 8.0.6, if your vendor secret has character like "!" or"&" you will see a failure in setting the secret. Even you select option of old wlsgen version, it doesn't work
It means you lservrc has been created by older version wlsgen 8.0.6 So if you want to update lservrc, you need to use wlscgen 8.0.6 and NOT higher version
Best Regards
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.