View Full Version : Guide needed
Handover24
2013-03-25, 12:04 AM
Hi All,
Is there anyone who could share something on how to use the diagnostic port for QPST on Android phones ( also for the latest i-phone would be very appreciated ).
Or maybe you could suggest me a previous post that I'm not able to find through search...
Thanks in advance.
hamody2005
2013-03-25, 02:23 AM
do you need QPST OR How to use QPST?
all you need just Install QPST and the connect your Android Phone then Open QPST Configuration
From Ports Tab click Add New Port
-Uncheck "Show serial and USB........" and Some COM will appear
-then choose your device Com and click Ok
-you will see your device in Ports Tab "If not choose another com"
-If your phone showen on port tab from Start client Mnew Choose service Programming.
-a new window for programing your phone and do what you need Like" IMSI ,......."
Handover24
2013-03-25, 02:32 AM
My problem is that I can not find the diagnostic port...;) phone HTC wildfire
Handover24
2013-03-25, 02:45 AM
to be clearer my android phone does not appear as a modem and I can find it on a com port
32054
hamody2005
2013-03-25, 03:48 AM
First of all You must set Your android devices to diagnostic mode
For HTC ##3432 and click Call
then your device driver must be installed
Then Uncheck "Show serial and USB........" and Some COM will appear and continue
Handover24
2013-03-25, 07:11 AM
it doesn't work...the code is not the right one
T_ADD
2013-03-25, 07:35 AM
it doesn't work...the code is not the right one
The code for Android phones is ##DIAG or ##3424
Sent from my ADR6300
hamody2005
2013-03-25, 03:24 PM
May be your ROM isn't the orginal
Try ADD # After the code
Try ##DIAG# or ##3424#
Handover24
2013-03-25, 09:34 PM
I think so...How could I recognize the ROM Type ? If it is original or not ?
Thanks
T_ADD
2013-03-26, 05:58 AM
Go to settings-->phone-->software
Sent from my ADR6300
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.