Guide needed

[Handover24]

Hi All,
Is there anyone who could share something on how to use the diagnostic port for QPST on Android phones ( also for the latest i-phone would be very appreciated ).
Or maybe you could suggest me a previous post that I'm not able to find through search...
Thanks in advance.

[hamody2005]

do you need QPST OR How to use QPST?


all you need just Install QPST and the connect your Android Phone then Open QPST Configuration

From Ports Tab click Add New Port
-Uncheck "Show serial and USB........" and Some COM will appear
-then choose your device Com and click Ok
-you will see your device in Ports Tab "If not choose another com"
-If your phone showen on port tab from Start client Mnew Choose service Programming.
-a new window for programing your phone and do what you need Like" IMSI ,......."

[Handover24]

My problem is that I can not find the diagnostic port...;) phone HTC wildfire

[Handover24]

to be clearer my android phone does not appear as a modem and I can find it on a com port

32054

[hamody2005]

First of all You must set Your android devices to diagnostic mode
For HTC ##3432 and click Call
then your device driver must be installed

Then Uncheck "Show serial and USB........" and Some COM will appear and continue

[Handover24]

it doesn't work...the code is not the right one

[T_ADD]

it doesn't work...the code is not the right one

The code for Android phones is ##DIAG or ##3424

Sent from my ADR6300

[hamody2005]

May be your ROM isn't the orginal


Try ADD # After the code

Try ##DIAG# or ##3424#

[Handover24]

I think so...How could I recognize the ROM Type ? If it is original or not ?
Thanks

[T_ADD]

Go to settings-->phone-->software

Sent from my ADR6300