Mdaf
2013-03-13, 06:22 AM
Hello, we know that UE in open loop power control calculates the PRACH power before sending it by calculating it from received level, require c/I, UL load....
Assuming that we have a UE that after calculating the required PRACH power needed it exceeds the max power that can be send by UE, what would the UE do?
Ie after calculation the UE should send 33 dBm while the max power that can be sent by UE is 24
many thanks.
Assuming that we have a UE that after calculating the required PRACH power needed it exceeds the max power that can be send by UE, what would the UE do?
Ie after calculation the UE should send 33 dBm while the max power that can be sent by UE is 24
many thanks.