CDMA the BSS MAINEX AAT V100R004

[hamody2005]

Hi Does any body have ******** for this huawei internal software CDMA the BSS MAINEX AAT V100R004 31820 It's used to analysis BSS Run log file Pl

[DANORM]

I am searching it too much time, but can not find (

[DANORM]

http://bbs.niusky.com/read-htm-tid-157269-ds-1-page-1.html#3794474

I found that link

but can not download also that patch

[ssmc]

http://bbs.niusky.com/read-htm-tid-157269-ds-1-page-1.html#3794474

I found that link

but can not download also that patch
plz share setup files. maybe i can test it.

[T_ADD]

http://bbs.niusky.com/read-htm-tid-157269-ds-1-page-1.html#3794474

I found that link

but can not download also that patch

Hi DS, is this software different from the omstar that you uploaded previously? If so, what's the difference?

Sent from my ADR6300

[T_ADD]

Sorry, missed the last line in hamody's 1st post. So its used to analyse BTS/BSC runlog?

I'd like a copy too !

Hamody, can u please upload the sw? I'd also like to have a look. Does it require soft license or hardware dongle? Thanks.

Sent from my ADR6300

[ssmc]

here patch file. not test.

31823

[aosan]

here patch file. not test.

31823


Not working with me... :(

[DANORM]

Not working with me... :(

aosan if you have installation file, plz upload it

[aosan]

Here it is....pls update if it is working fine with you. :)

[jkpllan3]

For me not working...31825

[hamody2005]

For me not working...31825

I appreciate all you efforts
For is the same Error message

"Not valid size - ......"

what we should do?

[T_ADD]

Same here.

Edit: looks like we may have to contact somebody those on this forum who can actually help with sw cr4ck1ng.

Sent from my ADR6300

[DANORM]

but look > this sw is a old version as i see (2009), so will there work new BSS versions, like: BSS7.0; BSS7.1; BSS8.0.

Maybe it can not analyze new BSS version logs...

[T_ADD]

Still worth cr4cking and trying.

Sent from my ADR6300

[DANORM]

from "cr4ckers"

the software: "cdma the bss mainex aat v100r004" is out of date

need new version

[T_ADD]

What do you mean? What happens now? I really want this sw to work. I pm'd some guys here for help but haven't got a reply yet.

Someone please...

Sent from my ADR6300

[carver]

i found this solution, sw run, but don't test log,
my frends swap huawei to lucent at this moment.

change hxxp to http and use pass for extract
hxxp://www.sendspace.com/file/zlhkyv
pass h6fjjmihlzbss94a

[T_ADD]

Hi carver, thanks very much. It works. You're the best man.

[hamody2005]

Great But It didn't work with me it gives me

31856

when i try to start a new project

please help

[T_ADD]

I just downloaded and extracted the file and copied it to the omstar folder. That's it.

Try re-downloading.

(edit: your screenshot doesn't show)

Sent from my ADR6300

[ssmc]

carver (http://www.finetopix.com/member.php?1561-carver)'s med tested working fine. but how to get the log files. plz help me.

[T_ADD]

carver (http://www.finetopix.com/member.php?1561-carver)'s med tested working fine. but how to get the log files. plz help me.
log files are stored in BAM. For BSC6600:

d:\Airbridge\Services\BTSLOG
e:\cdma2000\MSSQL\DATA
f:\cdma2000\M2000\Backup\FamLog
d:\cdma2000\Runlog

[DANORM]

anybody has any documents about "CDMA the BSS MAINEX AAT V100R004"?????

[T_ADD]

There's a nice help file in with that software. Look under help in sw menu. Its not hard to use either.

Sent from my ADR6300

[hamody2005]

I just downloaded and extracted the file and copied it to the omstar folder. That's it.

Try re-downloading.

(edit: your screenshot doesn't show)

Sent from my ADR6300

Thx, It works fine in windows XP and Office 2007 but in Win7 And Office 2010 it gives me "Failed To Create empty document"

[hamody2005]

carver (http://www.finetopix.com/member.php?1561-carver)'s med tested working fine. but how to get the log files. plz help me.

log files are stored in BSC BAM. For BSC6600

d:\Airbridge\Services\BTSLOG " For BTS LOG
e:\cdma2000\MSSQL\DATA "For ALARM
f:\cdma2000\M2000\Backup\FamLog "FOR Backup of Fam Run Log Many days
d:\cdma2000\Runlog "For Run log of the same day but you will see no files there.

log files are stored in BSC BAM. For BSC6680

d:\Airbridge\Services\BTSLOG " For BTS LOG
d:\cdma2000\MSSQL\DATA "For ALARM
d:\cdma2000\M2000\Backup\FamLog "FOR Backup of Fam Run Log Many days
d:\cdma2000\Runlog "For Run log of the same day but you will see no files there.

Drive Letter it depend on installation of software

Rep to Mr. T_ADD

[T_ADD]

Hi hamody, it seems the problem may be attributed to office 2010. Some Microsoft component may be different or missing.

(BTW, if I had this sw back from Jan, I would have found my DSP problem without huawei support's help)

Sent from my ADR6300

[DANORM]

e:\cdma2000\MSSQL\DATA

from here i can not copy any file, it says that's is is using by another program.

can you copy from there?>

[T_ADD]

Can you say what files you have in there?

Sent from my ADR6300

[DANORM]

Bam_log.LDF
Alarm.mdf
Alarm_log.LDF
Bam.mdf
Perf_log.LDF
Perf.mdf

[T_ADD]

You in the wrong directory. Those are SQL database files.

Check hamody's post on 6680 paths.

Sent from my ADR6300

[DANORM]

You in the wrong directory. Those are SQL database files.

Check hamody's post on 6680 paths.

Sent from my ADR6300


Nope. That are the files which are located in D:\cdma2000\MSSQL\DATA

[hamody2005]

e:\cdma2000\MSSQL\DATA

from here i can not copy any file, it says that's is is using by another program.

can you copy from there?>

Hi

Some files can't be copied because it's in use by BSC but you can take it from backup folder

in you case you can find the backup from here

for BSC6680:-
D:\cdma2000\Backup\CFGfile\ " here you can get alarm & BAM backup files.

for BSC6600:
f:\cdma2000\Backup\

[T_ADD]

Hi

Some files can't be copied because it's in use by BSC but you can take it from backup folder

in you case you can find the backup from here

for BSC6680:-
D:\cdma2000\Backup\CFGfile\ " here you can get alarm & BAM backup files.

for BSC6600:
f:\cdma2000\Backup\

Inner alarm can be copied. On db files cannot because they're in use continually.

Sent from my ADR6300

[T_ADD]

I did some EVDO access failure analysis. The highest release cause is

31869

There's no details of the release codes in the online help manual. Can anyone say what would be the reason for this release cause?

RelCause: 55c
Macro name:
RRM_FAIL_PILOT_NOT_SUPPORT_SVR_TYPE
Detail Explain:
Pilot not supporting call service type

[T_ADD]

Another one is for EVDO call drop analysis:

31870

Can anyone identify this timer? May be hamody??? BTW there are no alarms in the BSC for this.

RelCause: 272f
Macro name:
CCB_FAIL_DO_DATA_FWD_REQ_TIMEOUT
Detail Explain:
Waiting for SDU_CCM_DO_DATA_FWD_REQ timed out
Cause:
The timer is not configured properly, or the internal message interaction fails. Perform analysis based on alarms and assertions.

[T_ADD]

I did some EVDO access failure analysis. The highest release cause is

31869

There's no details of the release codes in the online help manual. Can anyone say what would be the reason for this release cause?

RelCause: 55c
Macro name:
RRM_FAIL_PILOT_NOT_SUPPORT_SVR_TYPE
Detail Explain:
Pilot not supporting call service type

I've found out that all the sites having problems in this analysis have been EVDO rev. 0 sites. So what's happening is that every time a rev. A modem or phone makes a connection request, the system denies it service and makes it fallback to rev. 0. That's why it says in cause that pilot does not support this service. So this one is figured out.

Upgrading this sites to rev. A would solve this issue since we have more rev. A modems than rev. 0.

I'll find out on the one below following week.

Sent from my ADR6300

[T_ADD]

Finally understood this one too. 272f.

Sent from my ADR6300

[herdkid]

i found this solution, sw run, but don't test log,
my frends swap huawei to lucent at this moment.

change hxxp to http and use pass for extract
hxxp://www.sendspace.com/file/zlhkyv
pass h6fjjmihlzbss94a

hi,carver!the med file of sendspace is invalid now!could you send me a copy to my email herdkid@gmail.com,thanks!

[T_ADD]

here it is. download from here. can't send to email according to rules!
hi,carver!the med file of sendspace is invalid now!could you send me a copy to my email herdkid@gmail.com,thanks!

[Muhammad]

i found this solution, sw run, but don't test log,
my frends swap huawei to lucent at this moment.

change hxxp to http and use pass for extract
hxxp://www.sendspace.com/file/zlhkyv
pass h6fjjmihlzbss94a


Can you please upload this again. I am in need of this tool, please.

BR

[hamody2005]

Finally understood this one too. 272f.

Sent from my ADR6300

Hi Mr. T_ADD
As you said "Finally understood this one too. 272f."

I am facing the same problem with RelCause: 272f could you share it with us .