johnomarjimenez
2013-02-08, 09:40 PM
Hi Huawei Expert,
Good Day!
May I ask some information About the behavior of the UE.
Scenario : if the UE is off or the UE is currently camping on 2g, there will be a possibility that the UE Will scan the signal of 3G to camp on,
how we can able to ensure that the UE will prioritize to camp of F1 or F2 and will not select F3 During camping procedure.
Is this scenario can still be manage using some parameter?
Please share some idea also for some natural behavior of UE During camping procedure, because as I know the UE is always scanning the best Signal to camp on idle mode,
As I know the below parameter will controlled by 3g system only when the UE is already on the 3g and received the system information block message
1-To keep the traffic on F1, IDLEQOFFSET2SN =50, on the interfreq neighbour from F1-f3 & F1-F2, while IDLEQOFFSET2SN =-50 will be configure to F2-F1 & F3-F3 inter-frequency neighbor.
2-inter-frequency cell reselection ,
F1 ; IDLESINTERSEARCH = 4
F2 ; IDLESINTERSEARCH = 6
F3; IDLESINTERSEARCH = 6
Thanks and Have a nice day to all
Please comment to gain reputation. i will share reputation to all will give idea about this
Good Day!
May I ask some information About the behavior of the UE.
Scenario : if the UE is off or the UE is currently camping on 2g, there will be a possibility that the UE Will scan the signal of 3G to camp on,
how we can able to ensure that the UE will prioritize to camp of F1 or F2 and will not select F3 During camping procedure.
Is this scenario can still be manage using some parameter?
Please share some idea also for some natural behavior of UE During camping procedure, because as I know the UE is always scanning the best Signal to camp on idle mode,
As I know the below parameter will controlled by 3g system only when the UE is already on the 3g and received the system information block message
1-To keep the traffic on F1, IDLEQOFFSET2SN =50, on the interfreq neighbour from F1-f3 & F1-F2, while IDLEQOFFSET2SN =-50 will be configure to F2-F1 & F3-F3 inter-frequency neighbor.
2-inter-frequency cell reselection ,
F1 ; IDLESINTERSEARCH = 4
F2 ; IDLESINTERSEARCH = 6
F3; IDLESINTERSEARCH = 6
Thanks and Have a nice day to all
Please comment to gain reputation. i will share reputation to all will give idea about this