PDA

View Full Version : Connect to both M2000 & Internet Simultaneously



justdream
2013-02-06, 09:45 PM
Experts,

Do you know smart way to let us able to connect to both M2000 & Internet Simultaneously
So we don't need to log-out M2000 to check emails and come back, etc

Handover24
2013-02-06, 10:03 PM
Here in my project this is the default :-)...anyone could access to internet and M2000...but only fafe sites :-)

justdream
2013-02-06, 11:01 PM
Here in my project this is the default :-)...anyone could access to internet and M2000...but only fafe sites :-)

Do you have any idea how IT team configure it?
what's fafe sites?

Handover24
2013-02-08, 06:43 AM
Safe sites are those who are not banned... for example www.4shared.com (http://www.4shared.com) it's banned facebook and this forum are not banned.
For the configuration I don't know how IT has done :-)

ivanbrij
2013-02-08, 01:51 PM
You can try adding static ip route in your PC with CMD.

T_ADD
2013-02-08, 04:56 PM
Or you could configure 2 ip addresses in the IPv4 properties. Windows supports this feature. I would have sent a screenshot but my laptop is at work. In that, I have the primary configured for internet and secondary for BSC client.

You could probably use 2 nic cards too.

justdream
2013-02-08, 07:28 PM
Or you could configure 2 ip addresses in the IPv4 properties. Windows supports this feature. I would have sent a screenshot but my laptop is at work. In that, I have the primary configured for internet and secondary for BSC client.


Please guide how to do

T_ADD
2013-02-09, 03:29 AM
I'll send a screenshot on Monday I get back to work.

T_ADD
2013-02-11, 05:16 AM
Here are the screenshots. You can input one IP under general and one in alternate configuration. But then everytime you want to use one of them, you'll have to connect the relevant LAN cable to computer.

Please note this is just one way. There might be others.

3166931670

justdream
2013-02-11, 08:05 PM
I'm a little confused,
I've just 1 IP (for M2000), my other network is wifi "without IP"

T_ADD
2013-02-12, 05:39 AM
that's ok you just set it to "obtain an IP address automatically", same for DNS. See first screenshot.

thuti
2013-05-05, 06:16 PM
Experts,

Do you know smart way to let us able to connect to both M2000 & Internet Simultaneously
So we don't need to log-out M2000 to check emails and come back, etc

There are many ways that you can access M2000 & Internet simultaneously.

First, you connect M2000 and use proxy to access some websites.
Second, you can use M2000 to local network. Then, you so another netword card (for eg: use ethernet and Wifi, HSDPA over USB,...) to connect internet by routing them. You route all the network related M2000 over default gateway ethernet which network's used in M2000. Then, you route all the network you using connect Internet (over Wifi or HSDPA) over default gateway of this network.

For eg: M2000 use IP 10.0.36.46/24 default gateway 10.0.36.1
Wifi use IP 192.168.10.163/24 default gateway 192.168.10.1

Use cmd command to route static them.
route add 10.0.36.0 mask 255.255.0.0 10.0.36.1 metric 1
route add 0.0.0.0 mask 0.0.0.0 192.168.10.1 metric 1

Done!