PDA

View Full Version : Tetra CPS



zeuscane
2009-02-28, 08:03 PM
TETRA Customer Programming Software (CPS) for MTH800/MTM800/MTP850 ******** TETRA Terminals
http://www.4shared.com/file/89952977/8c95f2cb/********_CPS_552__for_Tetra_MTH800_MTM800_MTP850_.html

Enjoy

schranze
2010-04-06, 08:56 AM
TETRA Customer Programming Software (CPS) for MTH800/MTM800/MTP850 ******** TETRA Terminals
http://www.4shared.com/file/89952977/8c95f2cb/********_CPS_552__for_Tetra_MTH800_MTM800_MTP850_.html

Enjoy

thx i try it

schranze
2010-04-06, 09:09 AM
thx i try it

do you have the pass pls for the software

DCA
2010-04-06, 12:01 PM
@zeuscane

Do you also have a R6D.xxx.xxx CPS?
(R6D.558.01 would be more then nice :D)

zeuscane
2010-04-06, 04:05 PM
@ DCA
I am sorry I don't have this tools, I will try to look for it.

zeuscane

tetranathan
2010-05-05, 05:26 AM
hi do you have the passord for the program thanks nathan

zeus
2010-05-14, 08:27 AM
Check the cps user guide you have the "user" and "admin" pass there :)

tetranathan
2010-05-14, 05:09 PM
Check the cps user guide you have the "user" and "admin" pass there :)
thanks mate i have them now also my mth800 shows invalid cp any ideas


and when i try to write to the radio it says could not load codeplug inval;id location

zeuscane
2010-05-14, 05:19 PM
Try this
http://www.finetopix.com/showpost.php?p=78547&postcount=1

zeuscane

thanks mate i have them now also my mth800 shows invalid cp any ideas


and when i try to write to the radio it says could not load codeplug inval;id location

grid666
2010-05-14, 08:37 PM
thanks mate i have them now also my mth800 shows invalid cp any ideas


and when i try to write to the radio it says could not load codeplug inval;id location


Chances are your phone is damaged beyond user repair.

It means normal CPS cannot help you, what should be done is to write Whole Codeplug with correct firmware according to codeplug version.

In other words, what is required is Tetra Depot CPS

tetranathan
2010-05-15, 05:50 AM
i have pm you

tetranathan
2010-05-15, 05:54 AM
Chances are your phone is damaged beyond user repair.

It means normal CPS cannot help you, what should be done is to write Whole Codeplug with correct firmware according to codeplug version.

In other words, what is required is Tetra Depot CPS
i have pm'ed you

tedwbarrett
2011-02-16, 07:44 AM
hi all i have a mpt850 and it has ver R13.020.7184 when i turn on dose anyone know the cps i need ?

Motorola
2011-02-18, 12:51 AM
hi all i have a mpt850 and it has ver R13.020.7184 when i turn on dose anyone know the cps i need ?

MR.5.12 will do


regards