Activate Cell_PCH state

[jenriqp]

Hi!
here show you how activate Cell_PCH state. I hope be helpful

RNC activate CELL_PCH scripts RNC HW R13:

ADD TRMFACTOR: FTI=10, REMARK="IUPS-10", PSINTERDL=10, PSINTERUL=10, PSBKGDL=10, PSBKGUL=10, HDINTERDL=10, HDBKGDL=10, HUINTERUL=10, HUBKGUL=10;
MOD ADJMAP: ANI=10, ITFT=IUPS, FTI=10;
MOD ADJMAP: ANI=11, ITFT=IUPS, FTI=10;
MOD ADJMAP: ANI=12, ITFT=IUPS, FTI=10;
MOD ADJMAP: ANI=13, ITFT=IUPS, FTI=10;
SET UCORRMALGOSWITCH: DraSwitch=DRA_HSDPA_STATE_TRANS_SWITCH-1&DRA_HSUPA_STATE_TRANS_SWITCH-1&DRA_PS_BE_STATE_TRANS_SWITCH-1&DRA_PS_NON_BE_STATE_TRANS_SWITCH-1;
SET UCORRMALGOSWITCH: DraSwitch=DRA_DCCC_SWITCH-1&DRA_HSUPA_DCCC_SWITCH-1;
SET UPSINACTTIMER: PsInactTmrForInt=1800, PsInactTmrForBac=1800;
SET UUESTATETRANSTIMER:BeD2FStateTransTimer=5, BeF2PStateTransTimer=5, BeH2FStateTransTimer=5, BeE2FStateTransTimer=5;
SET UUESTATETRANS: BeF2DTvmThd=D1024, BeF2HTvmThd=D1024, BeF2ETvmThd=D1024;
SET URRCTRLSWITCH: RsvdPara1=RSVDBIT1_BIT21-0;
SET URRCTRLSWITCH: RsvdPara1=RSVDBIT1_BIT20-0;

Remember add me reputation!!