PDA

View Full Version : [ALU]9700 WIMAX W4 Radio Algorithms and Parameters Description



echomoon
2012-10-14, 12:25 AM
[ALU]9700 WIMAX W4 Radio Algorithms and Parameters Description

STUDENT GUIDE

Source:ALU
Pages:246
Type:PDF

Course Objectives:
Upon completion of this course, you should be able to:

To be able to describe the structure the radio frame and the ways to configure the air interface with the associated parameters, included the AAS with the Beamforming and the MIMO

To be able to describe the different steps of the radio connection and their parameters
To be able to describe the mobility procedure in the different mode: connected wit the andover and non connected with the Idle mode.

To be able to describe the QoS mechanisms on the air interface and on the transport network.



Course Outline:
Module 1. Introduction 13
Module 2. Air Interface Description 29
Module 3. RAN Connection Setup 105
Module 4. Mobility Management 155
Module 5. QoS Management 207

29785

Download from Box.com (https://www.box.com/s/b4uwtan2tchute4c4xvt)
Pass:finetopix



Related docs:
WiMAX Radio Principles & Transport Network WiMAX W4.x (http://www.finetopix.com/showthread.php?32310-ALU-WiMAX-Radio-Principles-amp-Transport-Network-WiMAX-W4.x)
9700 WiMAX W4 Introduction to QoS Monitoring (http://www.finetopix.com/showthread.php?32306-ALU-9700-WiMAX-W4-Introduction-to-QoS-Monitoring)
9700 WiMAX W4 End-to-End Architecture (http://www.finetopix.com/showthread.php?32305-ALU-9700-WiMAX-W4-End-to-End-Architecture)



Br
echomoon

dimooon11
2012-10-14, 04:21 PM
It is very old document since ALU do not support wimax technology for many years and it's been there already.
But thanks anyway