Tems 10.0.5 Med_full [Archive] - Wire Free Alliance

dtvt2

2012-10-02, 12:39 PM

Jerry

2012-10-02, 01:40 PM

thanks.

I tried with Win 7 x64 but it said devcon failed when i run install.bat
Anyone can help?

dtvt2

2012-10-02, 04:22 PM

@Jerry: it's only for win x32 bit

jamesbond

2012-10-02, 05:28 PM

Plz share any active link for setup?

dtvt2

2012-10-02, 06:40 PM

This is link to download setup: http://www.4shared.com/file/MRphpCn8/TEMS_Investigation_1005.html

Jerry

2012-10-02, 06:56 PM

dear dtvt2,

does it support for TEMS RA, x32? I am going to migrate my pc to x32.

kkyasir

2012-10-02, 10:14 PM

Hi everyone, This is emulator for tems 10.0.5. I tested it. It work fine: CS, PS download FPT, Mos measurement.... I think it full. I bought it last year from my friend. I think this is time to share to everyone. Hope it useful. Thanks & Rep

i have run the Batch file but i am still getting the HASP run time error.... i am also unable to install the SafeNet Inc.USB Driver every time it is failed..

any solution ???????????????????

TEMS

2012-10-02, 10:54 PM

i have run the Batch file but i am still getting the HASP run time error.... i am also unable to install the SafeNet Inc.USB Driver every time it is failed..

any solution ???????????????????

Need to installation on run time of SRM

kkyasir

2012-10-03, 12:33 AM

Need to installation on run time of SRM

Brother sorry i didnt get you can u plz explain me about "Need to installation on run time of SRM"

kidkid

2012-10-03, 02:52 AM

Brother sorry i didnt get you can u plz explain me about "Need to installation on run time of SRM"
haspdinst.exe -i

kkyasir

2012-10-03, 03:07 AM

haspdinst.exe -i

where i can find it ???

aubidamax

2012-10-03, 03:20 AM

where i can find it ???

Run---> Cmd---> haspdinst.exe -i then enter

BRs

kkyasir

2012-10-03, 03:22 AM

29648
haspdinst.exe -i

i am getting below error.

kidkid

2012-10-03, 04:35 AM

29648

i am getting below error.

need hasp driver version <= 6.25

kkyasir

2012-10-03, 05:33 AM

need hasp driver version <= 6.25

Dear Can u please share HASP 6.25 driver as i have search it but couldn't find.

kidkid

2012-10-03, 05:57 AM

Dear Can u please share HASP 6.25 driver as i have search it but couldn't find.

use haspdinst.exe from any tems version <=13
but cancel updating from windows server .
or use updating driver from device manager -> update driver -> search driver on PC from installed drivers (last version from MS update server is 6.50 , if you install tems v.10 before i think this version should be 5.XX (so longtime ago used this version , i forgot version , but version of driver from tems 10 should be 100% working))

dtvt2

2012-10-03, 09:37 AM

dear dtvt2,

does it support for TEMS RA, x32? I am going to migrate my pc to x32.
I remember from tems 10 It doesn't have Tems RA

ching2-o

2012-10-03, 11:14 AM

is there any patch for this ems?

TEMS

2012-10-03, 12:14 PM

I remember from tems 10 It doesn't have Tems RA

Hi friend
start from TEMS ver 11 is no TEMS RA, for version 10.0.5 still have .

Jerry

2012-10-03, 12:33 PM

use haspdinst.exe from any tems version <=13
but cancel updating from windows server .
or use updating driver from device manager -> update driver -> search driver on PC from installed drivers (last version from MS update server is 6.50 , if you install tems v.10 before i think this version should be 5.XX (so longtime ago used this version , i forgot version , but version of driver from tems 10 should be 100% working))

@ kkyasir
you can check the installed driver version: Device Manager-> Universal Serial Bus controllers -> SafeNet Inc. HASP Key Driver tab, attached mind is v5.95

TEMS

2012-10-03, 12:42 PM

Dear Can u please share HASP 6.25 driver as i have search it but couldn't find.

Hi follow instruction;

1, use HASP_SRM_Run-time_Removal_Tool for removed old run-time

http://www.4shared.com/rar/CxK1ugtf/HASP_SRM_Run-time_Removal_Tool.html

2, install Sentinel_HASP_Run-time_setup and than run emulator

http://www.4shared.com/zip/Y7jpClXB/Sentinel_HASP_Run-time_setup.html

if still have problem please update.

hp3hp3

2012-10-03, 02:36 PM

First remove hasp drivers with it:
http://www.4shared.com/rar/IjRu5UOo/haspdinst_59.html

for remove old drivers edit install.bat and change -i to -r
and again install drivers with change to -i
-----------------------------------------
if not work maybe u install other emulator
this is tyrus emulator if want work u shoud remove other emul
-------------------------------------------------------------
for install it in windows 7 32X use this tutorial and tools

http://www.4shared.com/rar/GLWaHZGJ/Install_emul_in_windows_7__64X.html
http://www.4shared.com/rar/RGTUM_-P/dseo13b.html

ithink

2012-10-03, 04:06 PM

Jerry

2012-10-03, 07:12 PM

Hi follow instruction;

1, use HASP_SRM_Run-time_Removal_Tool for removed old run-time

http://www.4shared.com/rar/CxK1ugtf/HASP_SRM_Run-time_Removal_Tool.html

2, install Sentinel_HASP_Run-time_setup and than run emulator

http://www.4shared.com/zip/Y7jpClXB/Sentinel_HASP_Run-time_setup.html

if still have problem please update.
Hi hp3hp3,
I run removal tool but failed with message 'ERROR: Operating system not support 2.'
My Os is Win 7 x32. any help pls.

hp3hp3

2012-10-03, 07:44 PM

see my post i share need tools
if still have problem contact with me i help u with team viewer:D

Hi hp3hp3,
I run removal tool but failed with message 'ERROR: Operating system not support 2.'
My Os is Win 7 x32. any help pls.

arisrs

2012-10-04, 01:08 AM

hi all,

how i can download the attachment??

BR//

Jerry

2012-10-04, 11:35 AM

hi all,

how i can download the attachment??

BR//
Junior Member cant download the attachment.

Hi Admin,
I saw many these kinds of questions in the forum. It would be better to redirect them to Announcement when they click to download or information message. That would make the forum more cleaner.
just my opinion.

mkk123

2012-10-06, 10:35 AM

thanks for your support, I install all these files and I use WinXP-32 bit , but when run program this messeg appear
HASP SRM Protection system
feature not found (H0031)29673
your support please

tuyul

2012-10-06, 12:45 PM

just install the emulator ..dont patched again..then will be okay

br

berry001

2012-10-07, 02:01 AM

can this version connect TEMS mobile?

hp3hp3

2012-10-07, 02:04 AM

Yes
support W995 tems phone too

can this version connect TEMS mobile?

berry001

2012-10-07, 02:37 AM

but the license doesn't show TEMS mobile.
29679

hp3hp3

2012-10-07, 03:18 AM

what is your phone
cannt choise manually phone
tems detect it auto

but the license doesn't show TEMS mobile.
29679

emptyroom

2012-10-07, 11:59 AM

Hi everyone, This is emulator for tems 10.0.5. I tested it. It work fine: CS, PS download FPT, Mos measurement.... I think it full. I bought it last year from my friend. I think this is time to share to everyone. Hope it useful. Thanks & Rep
could you upload it on 4shared or rapidshare, couse i'm still junior and can't access it,thanks before

mkk123

2012-10-07, 09:17 PM

wi\hich emulator, can you send to me !!!!!!

mkk123

2012-10-07, 09:21 PM

thanks for your support, I install all these files and I use WinXP-32 bit , but when run program this messeg appear
HASP SRM Protection system
feature not found (H0031)29673
your support please

please can you explain that step by step ?????
BR

phongnt1

2012-10-07, 09:49 PM

do you have ***** tems 12 and tems 13???

mkk123

2012-10-07, 10:18 PM

do you have ***** tems 12 and tems 13???

No dear but I Have TEMS 8, firstly I removed the tems 8 after that used these files for HASP removoval after that install the new ver. HASP 5.6 or above after all that I install the emulator you send it ?????
but same problem (feature not found (H0031) ?????
your support for this issue please !!!!!!!!!!!

mkk123

2012-10-08, 01:33 AM

just install the emulator ..dont patched again..then will be okay

br

dear
can you explain step by step.
Thanx

hp3hp3

2012-10-08, 02:27 AM

friend HASP removoval only remove hasp drivers
after install drivers again can see all emul in DEVICE MANAGEr
if cant remove it before install tems 10.0.5 emul goto device manager ==}UNIVERSAL SERIAL CONTROLLERS
and disable all emul with right click and choise Disable and again install tems 10.0.5 emul
if u install other emul give u this error "feature not found (H0031"
means u have a emulator but feature is diffrent with tems 10.0.5
So first remove o disable all emul and install it work fine

dear
can you explain step by step.
Thanx

jonathan2908

2012-10-09, 06:34 PM

Another junnior user, pls can u upload it to another server?

dacoder

2012-10-13, 02:22 AM

does this med support route analysis as well?

dtvt2

2012-10-13, 08:22 PM

does this med support route analysis as well?
it doesn't have route analysis

mkk123

2012-10-14, 01:04 AM

Dear
I ask which kind of mobile can connected to this version???
K800i , Z750 , W995 these kinds compatible with this version 10.0.5 !!!!
If didn't compatible, how we can make connected to this version ????
Thanx

Jerry

2012-10-14, 10:05 AM

gsmman2006

2012-10-15, 03:18 PM

u can remove the driver then install driver 5.90 for that

gsmman2006

2012-10-15, 03:21 PM

ver10.0.5 can support

K800i and Z750i all of versions:

can supprt R1H W995 TP 7.3.3 ( i checked that )

Dear
I ask which kind of mobile can connected to this version???
K800i , Z750 , W995 these kinds compatible with this version 10.0.5 !!!!
If didn't compatible, how we can make connected to this version ????
Thanx

gsmman2006

2012-10-15, 04:02 PM

u can remove lat driver with this link
29815

then u can install HASP driver 5.90

Jerry

2012-10-15, 04:11 PM

@gsmman2006,

I run the tool completely. Then run emulator and it ok as below but no emulator is created, not any HASP found in Device Manager\UNIVERSAL SERIAL CONTROLLERS

Hope you can help.

======
D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.0.5>regedit /s Uninstall.reg

D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.0.5>devcon remove root\h6emu
ROOT\SYSTEM\0003 : Removed
1 device(s) were removed.

D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.0.5>regedit /s 10847.reg

D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.0.5>devcon install h6emu.inf root\h6e
mu
Device node created. Install is complete when drivers are installed...
Updating drivers for root\h6emu from D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.
0.5\h6emu.inf.
Drivers installed successfully.

D:\Softwares\TEMS\TEMS 10\HASP SRM TEMS 10.0.5>pause
Press any key to continue . . .
==============

Exodus

2012-10-27, 08:54 PM

Sorry for stupied question...
TEMS CellPlanner and TEMS Investigation are the same products? I need CellPlanner, but I can't find it....

formula44

2012-10-29, 12:16 PM

hi dtvt2,

is there an external link that noob like me can download those attachment please?

lamagica

2012-10-30, 10:31 AM

finally it works, using combination of TEMS' suggestion and thread starter file..
thanks..

hngydx

2012-11-03, 10:56 AM

can U share me this link again Thank,

ianmauhay

2012-11-27, 09:43 AM

can U share me this link again Thank,

Here you go.
Hope it helps.

piaoyisihai

2012-12-28, 08:16 PM

Tems 10.0.5 seems to have *****ed version, before and after the *****, but I have not got it!

dtvt2

2012-12-29, 03:00 PM

To download. you need to become Member. pls post useful doc. your reputation will increase

tuyul

2012-12-29, 09:57 PM

maybe u can find it in another link for download

br

tharinduwije

2012-12-30, 05:19 AM

Did anyone run a test run with a genuine TEMS for this C****? Appreciate if you can share the results?

mobilek530

2013-01-27, 01:49 PM

its is blocked by windows , what to do?

Rishu

2013-02-03, 09:01 PM

Hi All,

I have been searching this thread , Can I just have a air interface tool and some basic log files , I dont need whole licenses for drive test etc, just a software which is able to open some basic log files for lte attach, detach paging etc .. please help ...

jew2jew

2013-02-16, 01:19 PM

that it work or not?

firewise

2013-04-03, 10:14 AM

thands,but can not download it.
how to use it?

lamagica

2013-04-15, 01:23 PM

hi..
i previously succeeded installing on windows 7 32-bit, is this version also works for windows 7 64-bit?

dtvt2

2013-04-15, 01:59 PM

it only work for win 32bit
dtvt2

arisrs

2013-04-16, 11:40 PM

its fully run without a dongle??

dtvt2

2013-04-18, 10:22 AM

yes its full. I think so
dtvt2

racer.mhn

2013-06-08, 05:49 PM

thanks alot! Is the Route Analysis works with this med as well?

uel888

2013-06-08, 07:04 PM

thanks alot! Is the Route Analysis works with this med as well?
of course it will.

racer.mhn

2013-06-08, 09:08 PM

of course it will.

Thanks bro,

I asked because once I was using the med for Tems9 & RA was still asking for license . Let me try this one

chaosan1234

2013-06-17, 10:57 AM

this is i need ,good post.

prisma

2013-11-11, 02:02 AM

hi...i'am newbie, i can't download attached, please i realy need..

anggar

2013-11-12, 03:09 AM

need help please.
i cannot connect my modem sierra C308. device not detected with this tems

PLEASe HeLp Me

Pepegalta

2013-11-12, 07:19 AM

Thankx. Do you know if there is any documentation for it?

quynhdn

2013-11-22, 05:55 AM

Wait for my reaching 15 reputation to get this :(

mkk123

2013-12-09, 04:06 AM

dear thanx for your support, TEMS works fine, I ask about sony e******* arc work with this vergion of TEMS or not.
thanx again brother.

dtvt2

2013-12-09, 10:29 AM

dear thanx for your support, TEMS works fine, I ask about sony e******* arc work with this vergion of TEMS or not.
thanx again brother.

Xperia Arc cant work with this version
dtvt2

Deedaniel

2014-05-08, 09:46 AM

How dose this work? do i need a phone or a conputer with dongel? i got a zte md880

pippit2hn

2014-09-22, 04:28 PM

I fail to install it in windows 7 x64, error when start, hix

g.kashi@yahoo.com

2014-09-23, 12:51 PM

This is link to download setup: http://www.4shared.com/file/MRphpCn8...tion_1005.html (http://www.4shared.com/file/MRphpCn8/TEMS_Investigation_1005.html)