PDA

View Full Version : High RTWP



chronix_ray
2012-10-02, 11:40 AM
Hi Sirs,

What solution is needed in order to eliminate high RTWP in these scenario.

F1 has high RTWP (average of -68) while F2 is working in normal condition. Huawei System.


Br//

bino
2012-10-03, 10:49 AM
Hi Sirs,

What solution is needed in order to eliminate high RTWP in these scenario.

F1 has high RTWP (average of -68) while F2 is working in normal condition. Huawei System.


Br//

Check F1 has high RTWP all day or only busy hours.

BR.

chronix_ray
2012-10-03, 02:19 PM
Hi Sir,

F1 has high RTWP all day. and F2 has none.

Br//

sant
2012-10-03, 04:13 PM
Hi Sir,

Can you check surrounding cells covering to the same area,, if only F1 has high RTWP I think the possibility is due to external interference. If surrounding cells also have high RTWP so you should do frequency scanning.
Please correct me if I am wrong.

BR

chronix_ray
2012-10-03, 05:54 PM
Thanks, I thought there has something to do with the parameters.

chayhofmes
2012-11-09, 01:57 AM
High load can't not bring RTWP to -68dBm. usually it's external interference. Do check:
- surrounding, same direction cell whether their RTWP affected by same located interference
- swap feeder, hardware to check whether it belongs to hardware or feeder/antenna problem

The_Rf
2012-11-09, 08:58 AM
what is your strategy? have both Frec balanced??? or the most of the traffic is in just one freq?

frenchy
2013-02-07, 12:14 AM
Hi Sir,

F1 has high RTWP all day. and F2 has none.

Br//

Had the same problem, but on F2 cells

after investigation, it was a DECT that interfers

while we wait for the interferer to be shut down, i temporarily change the frequency on my F2 cells to F3
Qos improved as soon as i changed (DCR, CSSR, Rach trouble)
only downside is we lost dual carrier as frequencies are not adjacent anymore

SaskaToba
2013-02-07, 12:58 PM
How many sectors do you have on your NodeB? Is your F1 and F2 contiguous? I would suspect internal interference if you're not seeing it on any other cells in the area on the same freq.

sonar_bangla
2013-02-07, 07:32 PM
check the antenna, is there tma inserted or not, if there is tma then tune up the RxAttn parameter also u can check the intra freq neighbor relation in front cells which can make interference also....

Handover24
2013-02-08, 06:46 AM
for sure that is external interference