shuttle
2012-09-25, 07:21 PM
The question to the masters about Tems
In the 3G operator I'm working ,2 pieces of c1 (10537) ans c2(10612) frequencies are working and has dual carrier support.My problem is ; I should get hsupa test from eul channels ,which are open in 1 carrier and 2 carrier ,with Tems 11.0.7.I mean; I am asked to get tests from each of the channels one by one.
Problem
1:When I lock the Huawei e353 modem to 1 carrier with AT commands ;2 carrier frequency is seen on Tems but cell ID of 1 carrier is observed.The trace from RNC also verifies it is on 1 carrier but Tems 11.0.7 shows wrong frequency.How can I solve this?
2:In tests which I am doing with 3G USB modem; during recording tems shows cellID but when I play the recorded log it does not show the cellID .Where else can I send the CellID from?
3: Could u recommend me a modem which I can use in tems 11.0.7 ;doesn't suport multi or dual carriers but supports 5.76 mpbs hsupa and also I can lock to carriers?
In the 3G operator I'm working ,2 pieces of c1 (10537) ans c2(10612) frequencies are working and has dual carrier support.My problem is ; I should get hsupa test from eul channels ,which are open in 1 carrier and 2 carrier ,with Tems 11.0.7.I mean; I am asked to get tests from each of the channels one by one.
Problem
1:When I lock the Huawei e353 modem to 1 carrier with AT commands ;2 carrier frequency is seen on Tems but cell ID of 1 carrier is observed.The trace from RNC also verifies it is on 1 carrier but Tems 11.0.7 shows wrong frequency.How can I solve this?
2:In tests which I am doing with 3G USB modem; during recording tems shows cellID but when I play the recorded log it does not show the cellID .Where else can I send the CellID from?
3: Could u recommend me a modem which I can use in tems 11.0.7 ;doesn't suport multi or dual carriers but supports 5.76 mpbs hsupa and also I can lock to carriers?