View Full Version : Question Help me to fix !!! KPI TCH assignment fail it high after swap SIEMENS to Huawei
rachatak
2012-09-07, 11:45 PM
Dear Expert / guys
Help me to fix !!! KPI TCH assignment fail it high after swap SIEMENS to Huawei, it have problem only BSC huawei join to MSC Nonia
I found >> A3129H:Failed Assignments (Clear Commands Sent By MSC)(none) is increase.
Please help me.
rachatak
2012-09-07, 11:47 PM
http://www.4shared.com/photo/22sQxGyQ/BSC_HW_MCS_NOkia_2.html
mobilis
2012-09-08, 11:24 PM
Dear Rachatak
Please use the trace option or check the CHR in the BSC to have more detail about your problem .
rachatak
2012-09-09, 03:14 PM
Dear mobilis,
From trace i found this problem, more detail in this path >> http://www.4shared.com/office/eAptCHO7/Investigation_Report_for_TCH_A.html (http://www.4shared.com/office/eAptCHO7/Investigation_Report_for_TCH_A.html)
This area have wsap 5 BSC
1. before BSC SIEMENS under MSC SIEMENS --> BSC Huawei under MSC SIEMENS --> not have problem.
2. before BSC SIEMENS under MSC SIEMENS --> BSC Huawei under MSC Nokia --> have problem.
peanut
2012-09-09, 09:05 PM
Dear Rachatak,
as per your investigation, the clear request send by the MSC is mainly due to two reasons:
1. MSC Assignment Complete timer too low, check its value against the recommended one 30s
2. MSC behavior when receiving a Disconnect from the MS before the assignment complete procedure finish, does any one from Nokia Core Network know about a feature to correct this case?
Regards,
alg_optim
2012-09-10, 05:02 PM
Dear ,
Please check with huawei softparameter ( which BSC version you are using ?)
Thanks
rachatak
2012-09-14, 08:21 PM
Dear ,
Please check with huawei softparameter ( which BSC version you are using ?)
Thanks
for BSC Version BSC6900 >> GBSS13
rachatak
2012-09-14, 08:32 PM
Dear Rachatak,
as per your investigation, the clear request send by the MSC is mainly due to two reasons:
1. MSC Assignment Complete timer too low, check its value against the recommended one 30s
2. MSC behavior when receiving a Disconnect from the MS before the assignment complete procedure finish, does any one from Nokia Core Network know about a feature to correct this case?
Regards,
Dear Peanut
1. for MSC assignment timer my network is 28 Sec. For this value i changed to 30 Sec , but not clear.
2. In my network it have many MSC Nokia,
- GBSS9 not have problem
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.