iPASOLINK1000

[ankarb]

​Hey everyone,

I am looking for iPASOLINK1000 System description or Configuration manual.


If anyone has it, please share it with me.

Thanks a lot. :)

[simog72]

yes i have it s a 2011 manual
ipasolink 1000 6-42GHz digital radio system Pdf..it cuold be what ur are looking for?

bettter if u ask directly what ur are intrested in ..i mean Ptx , consuimption , thresholds..

[simog72]

below some intresting infos:
ipasolink1000 it s a 3U Modular IDU
4,16,32,64,256QAM modulation available
7,14,28,56MHz bandwidth available (7MHz not avail. with 256QAM)
upto 4GbE (2El+2 SFP)
high Power consuption seems: main board 45W,fans + modem22W;16xE1 interf 8W, STM1 interf 8W, PWE3 module 10W, AUx ch Module 3W
ODU 30W (6-11GHz),23W (13-42)
max capacity at 56MHz with 256QAM-> 460Mbps ...they just delcare 64Byte packet size VLAN tagged
DXC capability non blocking 168xE1
Ptx out MAX 29dBm at 4QAM and 24dBm at 256QAM (sysgain @4QAM 114dbm, 90dBm @ 256QAM 56MHZ----very good!!)

ENGINE : dual native
synceth + 1588vs supported :no additional info o that (transp or boundary..not declared)
Node configuration upto 12direction (1+0) or 6 (1+1)
E1 75Ohm or 120Ohm software selectable (intresting!)
no metion on Packet Compression
G.8032, RSTP,QOS on MPLS,L2 or L3
PWE3:Satop,Cespsn,ATMoP upt to 64xE1

in roadmap:
MPLS sw
CWDM
10GbE (i dont believe that in a close time)

i hope this helps

[ankarb]

below some intresting infos:
ipasolink1000 it s a 3U Modular IDU
4,16,32,64,256QAM modulation available
7,14,28,56MHz bandwidth available (7MHz not avail. with 256QAM)
upto 4GbE (2El+2 SFP)
high Power consuption seems: main board 45W,fans + modem22W;16xE1 interf 8W, STM1 interf 8W, PWE3 module 10W, AUx ch Module 3W
ODU 30W (6-11GHz),23W (13-42)
max capacity at 56MHz with 256QAM-> 460Mbps ...they just delcare 64Byte packet size VLAN tagged
DXC capability non blocking 168xE1
Ptx out MAX 29dBm at 4QAM and 24dBm at 256QAM (sysgain @4QAM 114dbm, 90dBm @ 256QAM 56MHZ----very good!!)

ENGINE : dual native
synceth + 1588vs supported :no additional info o that (transp or boundary..not declared)
Node configuration upto 12direction (1+0) or 6 (1+1)
E1 75Ohm or 120Ohm software selectable (intresting!)
no metion on Packet Compression
G.8032, RSTP,QOS on MPLS,L2 or L3
PWE3:Satop,Cespsn,ATMoP upt to 64xE1

in roadmap:
MPLS sw
CWDM
10GbE (i dont believe that in a close time)

i hope this helps


Thanks for the above information. Is it possible to share it?

[simog72]

please confirm your recieved doc

i hope this helps

[Moudj]

hi, could i get this document too?

[simog72]

30195


ok i suppose this is what u asked