View Full Version : M5.13 or M5.14 cps plus software
mth800
2012-08-03, 11:06 PM
Does anyone have this ,that want to share, maybe i got something you need/want ? talk in private if u want.
I have a dead mth800 i want give life to something went wrong in upgrading so i cant start it up by pressing 1+9 power on anymore. and what i understand can those cps plus versions start it up with usb cable which i got? otherway is rs232 with flasher tool?
i have the flashing tool to but no rs232 cable.
IF i get some of this so i can start it up, how to do it in program what is the steps of waking radio up? i have the org read of radio that was the first thing i did when i got the radio.
please help is needed;)
Kind regards
Mth800
zeuscane
2012-08-06, 12:50 AM
Here i've reposted 5.13 cps plus software.
The credit goes to those who first posted this program.
http://www.4shared.com/rar/33o_BtnE/513TetraCPSPlus32Setup_1part1.html
http://www.4shared.com/rar/E35ejUUj/513TetraCPSPlus32Setup_1part2.html
regards
zeuscane
mth800
2012-08-06, 06:28 PM
thank u so much for the software. but it didnt work out for me still get unknown device, so is it only rs232 cable left to do or is the drivers wrong? in text helpfile it said that the radio should start flash after 15 sec but nothing happends but that must be that the program cant find the radio beacuse the drivers isnt right or the radio is fucked up.
the cable i have is called AAKN4015A ******** can it be the cable that dont "support" the extra power that the radio need to start up? the program can feel that the cable connect if i change the usb ports but i get unknown device everytime. anyone that can give any advice?
regards Mth800
:)Thank to share learning
youtube found (Tetra CPS Plus Depot)
aqrabawi007
2012-09-13, 07:23 PM
Please explain, what do u mean by "Dead MTH800"? is it hardware defect not work at all ? or it gives a boot indication but nothing display ? or error in start-up operation ? ..etc ?
mth800
2012-09-15, 04:46 PM
Something went wrong with flash so i couldnĀ“t start my radio up, couldnĀ“t connect it to pc etc. but it works now. Had to have a serial cable and cloned another radio.
Please explain, what do u mean by "Dead MTH800"? is it hardware defect not work at all ? or it gives a boot indication but nothing display ? or error in start-up operation ? ..etc ?
explorers
2012-12-11, 10:24 PM
you can use TETRA cps PLUS MR5.13.01
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.