UMTS RF OPTIMIZATION BEST PRACTICE

[Jerry]

hi all,

Id like to share very good 3G Rf optimization doc.
Sorry if it is posted. I have looked around the forum but found not posted

Contents28802
3 PILOT CHANNEL FAILURE - HIGH DOWNLINK INTERFERENCE
4 PILOT CHANNEL FAILURE
5 PILOT POLLUTION
6 UPLINK AND PILOT COVERAGE IMBALANCE
7 TRANSMITTING MAX DL CODE POWER – FULL COVERAGE
8 TRANSMITTING MAX DL CODE POWER – NOT FULL COVERAGE
9 INSUFFICIENT RECEIVED UL DPCH POWER
10 RAPIDLY CHANGING RADIO ENVIRONMENT
11 UNEVEN LOAD DISTRIBUTION
12 HIGH DOWNLINK TX POWER

13 HIGH UPLINK RSSI
14 MANY DOWN-SWITCHES DUE TO COVERAGE TRIGGERING
15 HIGH FACH USAGE
16 HIGH SWITCHING RATES BETWEEN DEDICATED AND COMMON CHANNELS 32
17 LOW DATA THROUGHPUT
18 HANDOVER EVENT DETECTION FAILURE
19 HANDOVER FUNCTION FAILURE
20 HIGH ACTIVE SET UPDATE RATE

21 NO SUITABLE CELL
22 CELL RE-SELECTION FAILURE - UE IN IDLE OR CELL_FACH MODE
23 RANDOM ACCESS PROCEDURE PROBLEM
24 MANY INTRA-FREQUENCY CELL RE-SELECTIONS
25 MANY INTER-FREQUENCY CELL RE-SELECTIONS
26 UPLINK DEDICATED RADIO LINK SYNCHRONIZATION FAILURE – CALL SETUP
27 DOWNLINK DEDICATED RADIO LINK SYNCHRONIZATION FAILURE – CALL SETUP
28 POOR QUALITY IN UPLINK
29 POOR QUALITY IN DOWNLINK

[hursand]

it is password protected. share password.

[zeuscane]

Look at default password.

zeuscane


it is password protected. share password.

[dmitry28]

Look at default password.

zeuscane

Default password (JerryDefaultPass) does not work

28807

See Attach file. No pass

[khurrambilal01]

The password for the file posted by Jerry is "Jerry".

[Jerry]

The password for the file posted by Jerry is "Jerry".
Dont copy and paste the pw the unrar may not work, but type pw would be ok.

Thanks khurrambilal,

[chakku]

Unable to download, while clicking the link below error appeared :

you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page,you must have at least 15 reputation before you can download attachments . Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[Jerry]

Unable to download, while clicking the link below error appeared :

you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page,you must have at least 15 reputation before you can download attachments . Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.


You should ready this: http://www.finetopix.com/showthread.php?10392-Credit-System-and-Download-Priviledges.
alternative link, my default pass.
http://www.4shared.com/rar/UDnJWMOt/UMTS_RF_Optimization_Best_prac.html

[Vincentcys]

Thanks for sharing!:D