tek74
2012-07-21, 06:53 AM
Hi experts,
I would like to reduce the TX power of the first RACH preamble in order to reduce UL interferences. During a complete drive test, I realised that 90% of the time, the preamble is received after less than 3 retransmissions (and 66% in the first transmission).
Besides, during the same Drive Test, the average UE RACH TX power is -28dBm whereas the average UE TX Power during CS call is -36.37dBm. There is a 8 dB differences. Would that mean that the UE is actually transmitting more than necessary in the RACH ?
In this case, would it be possible to reduce the TX power of first preamble (now constantvalue is -20, i was considering reducing at -22/-24) ?
Thanks for the help.
I would like to reduce the TX power of the first RACH preamble in order to reduce UL interferences. During a complete drive test, I realised that 90% of the time, the preamble is received after less than 3 retransmissions (and 66% in the first transmission).
Besides, during the same Drive Test, the average UE RACH TX power is -28dBm whereas the average UE TX Power during CS call is -36.37dBm. There is a 8 dB differences. Would that mean that the UE is actually transmitting more than necessary in the RACH ?
In this case, would it be possible to reduce the TX power of first preamble (now constantvalue is -20, i was considering reducing at -22/-24) ?
Thanks for the help.