Abis optimization feature

[luganomu]

Hi all,

In our network Erickson RBS and BSC, we recently activated ABIS OPTIMIZATION FEATURE to improve the effective utilization of E1s.

Command RXAPP:MO=RXOTG-#; was previously(before ABIS OPTIMIZATION FEATURE activation) used to check the detailed utilization of E1(DIP)!

Can some one provide the command to check DIP utilization while the feature is activated?.

Rgds

[cheslav]

command don't depends of feature.

[kamnikot]

Hello,

Try using this command on the TG and respective TEIs, example, this is for sector A with two trxs: rxmop:mo=rxotrx-TG-0&&-1;

[luganomu]

The command RXAPP:MO=RXOTG-#; is not working now. Expert please help me a new command.

[cheslav]

There is no new command. Old command must work. You must receive something like this

<rxapp:mo=rxotg-15;
RADIO X-CEIVER ADMINISTRATION
ABIS PATH STATUS


MO
RXOTG-15


DEV SC APUSAGE APSTATE TEI
.
.
.
.
RTPGD-12969 0 SCCONC TRXC SIGNAL 0
RTPGD-12970 0 SCCONC TRXC SIGNAL 1
RTPGD-12971 0 SCCONC TRXC SIGNAL 2
RTPGD-12972 0 SCCONC TRXC SIGNAL 4
RTPGD-12973 0 SCCONC TRXC SIGNAL 9
RTPGD-12974 0 SCCONC TRXC SIGNAL 10
RTPGD-12975 0 SCCONC TRXC SIGNAL 11
RTPGD-12976 0 SCCONC TRXC SIGNAL 5
RTPGD-12977 0 SCCONC TRXC SIGNAL 3
RTPGD-13055 0 SCCONC CF/TRXC SIGNAL 62 8
IDLENON64K
0


END

[johnnymuss]

use below command to get the number of devices when Abis Opt is activated

rrscp:scgr=#;

[luinux123]

What commands can I use to manage Abis Optimization Feature in OSS E*******???

Regards.