Determine cross feeder without driving test in UMTS network.

[lihanbok]

Hi Expert,
I am doing optimize UMTS network. Many sites had problem (cross feeder). My UMTS network is very large, so I can not driving test all sites. Could you please tell me how to determine cross feeder without driving test in UMTS network( E******* and Huawei Vendor). I only supervise in OMC, could I determine it. Thanks for all reply.
lihanbok

[Processor]

Its difficult to tell in WCDMA as compared to 2G where u could view the HO flow/frequency between neighbours

[lejun]

Hi friend,

In 2G, you can check HO matrix and site data in the mapinfo to guess crossed feeder (in ALU system, i don't know in Huawei or E*******). I dont know in 3G system, can we get HO matrix (only count number of HO between pair neighbor)

But i think, it is better if you use drive test.

Best Regards

[lihanbok]

Hi Expert,
Thanks for your reply. I know it is very difficult to determine it without driving test. My network is very large and it is very expensive to driving test in my country( many river, mountain,..). Do you have any solution which maybe not accurate exactly. Sometime we do route driving test in my country but not for all. I don't know they install NodeB correct or not. It is a big problem with me. Thank you!
lihanbok.

[kevin_h811]

Do your contractors or subcons give SSV or Single Site Verification Report.
This is a functionality check of your cell or Node Bs where you can check if the cell/NodeBs are swap or not, Handover plot, Coverage and Signal levels and quality of your cell/NodeBs plot,throughput plot, etc.

[electron]

Hi Expert,
Thanks for your reply. I know it is very difficult to determine it without driving test. My network is very large and it is very expensive to driving test in my country( many river, mountain,..). Do you have any solution which maybe not accurate exactly. Sometime we do route driving test in my country but not for all. I don't know they install NodeB correct or not. It is a big problem with me. Thank you!
lihanbok.is a tool in E******* system it's name is FFAX(Find faulty Antenna) which is giving cross connection(partial), High VSWR, Antenna diagram mismatch,... . It is not trustable 100% but in some case it's recommendation is true you can find such a tool in your vendor as well.

There

[lihanbok]

Hi electron (http://www.finetopix.com/member.php?8810-electron),
Could you please share FFAX. It is the first time I heard about this tool. Thank you so much!
lihanbok

[electron]

Hi electron (http://www.finetopix.com/member.php?8810-electron),
Could you please share FFAX. It is the first time I heard about this tool. Thank you so much!
lihanbok

Please search in the forum you will find it (I worked with this tool also)

[lihanbok]

Hi electron (http://www.finetopix.com/member.php?8810-electron),
I have already search in this forum for this tool with name's (FFAX or FFA-X). I have only Presentation about this tool. Could you please show me where I can download this tool? Thank you so much.
lihanbok

[electron]

Hi electron (http://www.finetopix.com/member.php?8810-electron),
I have already search in this forum for this tool with name's (FFAX or FFA-X). I have only Presentation about this tool. Could you please show me where I can download this tool? Thank you so much.
lihanbok

Dear Friend,

It is an OSS tool and need license to activate it. It is not windows application

[lihanbok]

Do you have other idea for Determine cross feeder without driving test in UMTS network. Very hard to get a license to activate it. Only monitoring in RNC, could I solve this problem? Thanks a lot!
BR,
Lihanbok

[AlexSSS]

For 2G networks Schema Ultima Forte determine cross feeder very good based on MMR statistic

[lihanbok]

Hi AlexSSS (http://www.finetopix.com/member.php?2659-AlexSSS),
How about 3G, do you know how to determine cross feeder? Thank you so much.
BR,
Lihanbok.

[AlexSSS]

I never try to do this for 3G, so I dont know...


Hi AlexSSS (http://www.finetopix.com/member.php?2659-AlexSSS),
How about 3G, do you know how to determine cross feeder? Thank you so much.
BR,
Lihanbok.