PDA

View Full Version : firmware image R13.000.7893 for mtp850 380mhz



edyasia
2012-03-20, 05:55 AM
Hi. can anyone tell or post firmware image R13.000.7893 ? with this can enable repeater mode on 850.. pls help


thanks in advance

mth800
2012-08-08, 08:12 AM
looking for that to

Groott
2012-08-30, 07:10 PM
I think this is what you need?
http://www.4shared.com/file/Z0ZCG3wD/R130007893.html?

A (http://www.4shared.com/file/Z0ZCG3wD/R130007893.html?)lso FW 8138
http://www.4shared.com/file/yDgJox4y/R130008138.html?


(http://www.4shared.com/file/yDgJox4y/R130008138.html?)

pavlebo
2012-08-31, 06:12 PM
Password for extract?

dkscan
2012-09-03, 02:51 AM
Password for extract?
The z19-files in the links are not zipped so nothing needs to be extracted.

edyasia
2012-09-10, 07:28 AM
Groot thanks man!!!!! very glad for this!!!! at last i can revive some software dead radios!!! i have suscribed to your 4shared page. you have service manual for mtp850? level 3 or 2?
thanks in advance

Edyasia

sutter
2012-09-11, 01:36 AM
hi,


does anyone have something similar for the mth800?



greetings and thanks in advance!

vr10
2012-09-18, 06:48 PM
Help! Upgrade R13007893 Z19 failure,
Request to share R130005620z19 thank you:funk:

vr10
2012-09-18, 07:00 PM
I technical error:funk:

edyasia
2012-09-22, 04:04 AM
Hey vr10.. i have same problem must be firmware for another model, not mtp850 plain

vr10
2012-09-22, 06:35 AM
Hi edyasia! My radio to wait for repairs,

edyasia
2012-09-24, 10:16 PM
Hey Groott :time: Are you there??? yujuuuuuu!!! jejeje

Vr10 what firmware already have your radio??? i have r13007412. its good for you???

vr10
2012-09-24, 10:59 PM
edyasia! You mean! r130007412 flash radio ok

vr10
2012-09-24, 11:07 PM
My radio USB error

edyasia
2012-09-25, 12:17 AM
yes. i have z19 7412..

Usb problem is radio port contacts dirty... clean it with a toothbrush and alcohol 99%... only two drops in toothbrush. and very gently a small neddle to clean hard solids. With radio buttons up at the left are 3 pins for charging, next the rest. only make shure to clean the first 4 pins from left to right (gnd, D+, D-, Usb Vbus+) and the last one at the right (gnd) .


Sorry my english

vr10
2012-09-25, 12:48 AM
Hi edyasia ! Means that do not install the battery flash?

vr10
2012-09-25, 07:18 AM
My radio Screen (FDI FLASH is empty!):LPlease help

vr10
2012-09-25, 06:28 PM
Hi edyasia!I want to test r130007412 can it?:DI can reconnect with RS232 flash cable radio

Groott
2012-09-26, 01:25 AM
Firmware should be for the MTP850. Do you have MTP850? or do you have MTP850S?
MTP850S firmware should be R31.xxx.xxxx
MTP850EX firmware should be start with R15.
MTP850S has accesoiresconnector on the side.

edyasia
2012-09-27, 11:00 PM
Hi groott. i have MTP850 acc connector on the bottom of the radio. same data cable ******** cellphone v60-v66-v6. I put flash on the adequate directory.... When i try flash it cps say "found no software for current radio model (-90)" 2959629597295982959929600

edyasia
2012-09-27, 11:12 PM
Vr10, you have booted the radio with keys 9+1+power conected via usb to a pc with the cps open?? if yes; a few secons later the radio beginns to flash screen? (see IMG-20120927-01069.jpg (http://www.finetopix.com/attachment.php?attachmentid=29598&d=1348754378)) ??? sorry if ths question appear some stupid.

here is flash http://www.4shared.com/file/3amyoHg2/R130007412.html

vr10
2012-09-28, 12:06 AM
Thank you very much Hi edyasia! Pictures can not be downloaded

edyasia
2012-09-28, 04:31 AM
There are setup and error images


https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937134382152162

https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937334345303538

https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937350768976274

https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937472912247602

https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937640231501602

https://plus.google.com/photos/105202545245271449856/albums/5792937127437867921/5792937651755330930

vr10
2012-09-28, 06:25 AM
edyasia! RS232 programming cable can be re-connected to the computer.

Groott
2012-09-28, 07:28 AM
edyasia have you tried it to put in software (SW) directory.
In my CPS files are in SW directory.

vr10
2012-09-28, 05:41 PM
Flash success can not boot, the lack of internal code upgrade, need RS232 Flash cable?:funk:

edyasia
2012-09-28, 09:53 PM
Groott: yes, in flash and sw folder "porsia las moscas" an nothing. and i try to import to cps+ and nothing. any idea? whas is your cps setup?

Vr10: maybe your radio is disabled... clone it with another radio data... check it. Really a strange behavior, can you flash it and no boot?? hmmm

vr10
2012-09-29, 12:07 AM
edyasia ! My radio can not be upgraded. Only writing software, clear the software. Re-flash success can, not boot

vr10
2012-09-29, 12:48 AM
china Some auction sites mentioned the, Depot cps can fix the radio?

Groott
2012-09-29, 05:23 PM
Hi VR10,
Yes I think Depot cps can fix but very hard to get it. I don't have it, also looking for it.
When you have a flashdump from the radio and flashtool for serialport, that will maybe a option.

@Edyasia I have a couple of different CPS versions in use.

Groott
2012-09-29, 05:25 PM
@vr10 I think you can't read it with CPS? When you can, maybe there is a checkbox activated which will radio disable.

vr10
2012-09-29, 06:38 PM
Hi Groott ! How to activate the radio disabled. Thank you

Groott
2012-09-29, 09:06 PM
Hi Vr10,

You can read radio with CPS?

vr10
2012-09-29, 09:38 PM
Hi Groott ! Read Radio Internal Error :funk:

edyasia
2012-09-30, 07:46 AM
Groott what do you think about my upgrade error... i tried in 3 diffrents pc, in which of your settings work this firmwares?? example.

Vr10. you can read the radio??? if yes post a saved file to inspect it

Groott
2012-09-30, 05:48 PM
edyasia, do you use the right CPS with the good rights? Clear CPS for example will not upgrade TEA2 radio's.
For CPS+ you need the right Release Package for the rights. You have the CPS and then the release package will give you the rights.
I had same problem with CPS+ that it would not recognize radio because I didn't have the right release package.

Does your CPS support this firmware? look at Help and then details.

For now I'm going a way for a week and a half, so i don't have CPS availible for trying something.

Groott
2012-09-30, 05:53 PM
So you can't read the radio. Then I think the only way left is reading a working radio and flash this in yours but then everything is the same. Serial and TEI will also be reflashed. You need LAB CPS to make new cpg with TEI and Serial.

edyasia
2012-10-01, 11:52 AM
Groott: my radio is clear. the firmware you posted support clear radios??? this may be cause of error...

My radio come clear with fw 13.000.7184 from factory and i have succesfully upgraded to 13.000.7412 without any problem... and i vave upgraded more than 100 radios from my work... even lower version... i dont understand why the error. this firmware is not for clear radios???

Help says:
codeplug version 6817-7084
model number h60pcn6tz6an (model of my radio)
model type 65071
sw version r130008138

my cps is r6c.652.01

sept 27 2010

mr5.12

any clue???

vr10
2012-10-01, 06:56 PM
me radio .cp Invalid :8000 http://www.4shared.com/photo/e2LOlAke/2012-10-01_19-01-00_203.html

edyasia
2012-10-01, 11:34 PM
Vr10: open it.. four screws one under ******** label in the back. dissasembly completely, its easy only careful with display flex. blow it with medium pressure dry air or nitrogen under metallic caps and apply little shocks with something of hard rubber. reasembly it and try to upgrade.

vr10
2012-10-02, 06:34 PM
Hi edyasia !My hardware with the Z19? Thanks for help http://www.4shared.com/photo/t_zWfdos/2012-10-02_16-51-47_463.html

Groott
2012-10-04, 01:44 AM
Hi Edyasia,

I suggest you try newer version CPS as your help says "codeplug version 6817-7084"

My CPS tell me softwareversion/codeplugversion = R130008138 / 7418.
Found this in my CPS PMVN4240A / r01.02.08.00 21-05-2012. And this is in use with release package



MR5.14_NonE2E_Clear_FW8138_FW8139_R01013400.rpk

edyasia
2012-10-05, 01:13 AM
Vr10: your radio is working????

Groott. i heard someting about .rpk fikes... i have cps plus, can you post your rpk file? maybe work for me.

vr10
2012-10-05, 07:37 PM
Tetra Radio not work!:L

-bup-
2012-10-06, 05:45 PM
............................................ please delete

Groott
2012-10-07, 02:03 AM
Hi Edyasia,

I've uploaded my RPK file for MR5.14
It was very difficult because I'm on the road for my job.

Try to download it here: http://www.4shared.com/file/znnDPK0O/MR514_NonE2E_Clear_FW8138_FW81.html?
T (http://www.4shared.com/file/znnDPK0O/MR514_NonE2E_Clear_FW8138_FW81.html?)his file you must import in CPS+ under the tab "Release Package" and then "Import Release Package"

However I hope your CPS+ is new enough to accept this Release Package

vr10
2012-10-07, 02:48 PM
Hi Groott Thank you rpk file! cps + / R01.00.09.94 / PMVN4233A / does not match:(

Groott
2012-10-07, 05:30 PM
Hi VR10,

I think your CPS+ is to old. I use CPS PMVN4240A / r01.02.08.00 21-05-2012




Hi Groott Thank you rpk file! cps + / R01.00.09.94 / PMVN4233A / does not match:(

Groott
2012-10-07, 07:37 PM
Hi VR10,

Try this one http://www.4shared.com/zip/mm7EiERa/Tetra_CPS_Plus_R01020800_PMVN4.html? You should unzip this zipfile to your PC in the destination folder and then start CPS+ from the BIN folder. (it's a big file 456 Mb so it will take a little time.)

Then import Release package, that should work, but I don't know if it will work when radio gives error but give it a try.

vr10
2012-10-07, 09:07 PM
Hi Groott Thank you very much! I immediately try:D

Groott
2012-10-15, 02:38 AM
Hi Edyasia,

did it work for you?

edyasia
2012-10-25, 11:32 PM
Hi!!! sorry for late! work is full. 100% positive!! 2 radios upgraded with 2cp error" and corrected. more options and a llittle more sensitivity.

pavlebo
2013-03-12, 05:50 AM
Hi Groott,

Would you be so kind to upload again your MR5.14 RPK file.

Thanks.

Groott
2013-03-16, 05:33 AM
It's still there.

chipetto
2013-07-30, 02:38 PM
get a error "Imort Failed. the packet version is higher than de CPS Pleas install newer CPS
I have pmvn4233a tetra CPS Plus R10 (r01.00.09.94) ware can i find MR5.14 version
can any one help me Nico

jjvdlaan
2013-09-24, 05:12 PM
Hello, I am looking for Codeplug version R13.000.5848 for the MTH 850, I am trying to update this radio to a newer version, but CPS says it cannot work with this version of the radio software, And I do not have the correct codeplug or software for this radio.

Help Please.