ivanbrij
2012-03-18, 08:47 AM
Dear Experts,
I'm performing Capacity Analysis for RNC3810. For getting Calculated DC Load [%] I'm using equation listed below (from RNC3810 dimensioning description)
Calculated_DC_Load = SRBm + 2*Callsm + 1,5*Switchesm + 0,6*SoftHOsm + 0,3SofterHOsm + 0,03*UPvoicem + 0,01*UPcsm + 0,003*(UPpshsm)
Then I get Calculated DC Load = 10,44 % for the RNC; but with DC Load counters I get the Measured DC Load = 30%
The values are very different. Do you know if there is a mistake in the equation for Calculated DC Load, or if there is any update in the equation or any suggestion for do the analysis.
Thanks in advance,
Ivan..!
I'm performing Capacity Analysis for RNC3810. For getting Calculated DC Load [%] I'm using equation listed below (from RNC3810 dimensioning description)
Calculated_DC_Load = SRBm + 2*Callsm + 1,5*Switchesm + 0,6*SoftHOsm + 0,3SofterHOsm + 0,03*UPvoicem + 0,01*UPcsm + 0,003*(UPpshsm)
Then I get Calculated DC Load = 10,44 % for the RNC; but with DC Load counters I get the Measured DC Load = 30%
The values are very different. Do you know if there is a mistake in the equation for Calculated DC Load, or if there is any update in the equation or any suggestion for do the analysis.
Thanks in advance,
Ivan..!