RANOPT DB Template (Oracle 10G)

[venom]

Dear All,

Here i am sharing the RANOPT DB Template. I will also publish the complete guide of installing it if i am successful. So it is your choice, whether to download it now or later.

Sorry Guys, i am working on it for quite while now and i may charge some credits on both of things.

294

[venom]

Ok Guys, at last i m successful in installing the Database with RANOPT Support. It means we are able to work on RANOPT as well with ASSET, maybe dongle is still needed, or emulation can do the job for u!! for AIRCOM ENTERPRISE 6.1 , you need a soft license :)

Please dont forget to click on thanks button and add my reputation !


Note: This is detailed step by step installation Guide of Aircom Enteprise v6.0 with picture support, RANOPT works fine with nempez *****, so you don't have to ***** it again. You need to have Oracle 10G (10.2.1) to have this installation and later you can use the same database for your ASSET as well. Enjoy

http://www.megaupload.com/?d=UMA61F0U


This Guide is written for 6.0 but you can follow the same steps for Enteprise 6.1

If you see the broken link then report me immediately so that i can upload it again, thanks

[shahram]

what is the link in second post for?!

BR

[venom]

Step by Step Guide of Installing the RANOPT with Oracle 10G

It is little longer procedure than ASSET

[GSM_Huawei]

I think you must free for download or with low Credits

[GSM_Huawei]

Please click one of the Quick Reply icons in the posts above to activate Quick Reply.

[DaniloK]

Can you send me your Attached file on my e*mail rading@sezampro.rs

[venom]

I am sorry GSM_Huawei , if you know the solution to do it, then do it

I have seen your Quick Guide but it is for Enterprise 4.2 which is really an old version ! My Guide is prepared by me, and it is not a small procedure, over 28 Steps to do it with all pictures included. I have done several trials to make it work myself with NEMPEZ *****

I have seen one post in which someone said that RANOPT DB may not work with nempez ***** in Enteperise v 6.0 which is wrong ! It database works fine believe me and the guide is worth that much credits ! thanks

[gsmart]

Is this guide work with AIRCOM 6.1?

[venom]

it works for Aircom v6.1 too
if you have a license for AIRCOM v6.1 then this template will work for v6.1, you just need to make sure that you will install ORACLE 10g

[miro]

does this template include asset or not

[venom]

ASSET will also work with it ;)

[roni]

Dear All,

Here i am sharing the RANOPT DB Template. I will also publish the complete guide of installing it if i am successful. So it is your choice, whether to download it now or later.

Sorry Guys, i am working on it for quite while now and i may charge some credits on both of things.

456

Dear Mr. lccengr,

Please can you upload the ranopt templates in a link (rapid..., meg... etc..)

because i have no access to the file yet.

Thanks for your support
Roni

[lejun]

Dear All,

Here i am sharing the RANOPT DB Template. I will also publish the complete guide of installing it if i am successful. So it is your choice, whether to download it now or later.

Sorry Guys, i am working on it for quite while now and i may charge some credits on both of things.

477
I install RANOPT database follow your method. No i can connect to RANOPT database but i cant import logfiles.
Please kindly help me.
Thanks

[venom]

I install RANOPT database follow your method. No i can connect to RANOPT database but i cant import logfiles.
Please kindly help me.
Thanks

u can't if u r using nempez crac-k

I am looking for emulation of Aircom Enterprise suite v6.0 just for this purpose !!

It checks the dongle when u try to open logfiles !!

[lejun]

u can't if u r using nempez crac-k

I am looking for emulation of Aircom Enterprise suite v6.0 just for this purpose !!

It checks the dongle when u try to open logfiles !!
Hi Lccengr
Now i resolved this problem:D
-First install Aircom and database as your method. (i used the newest Aircom patch).
- Use nempez ***** as usual
- Use david .reg file and vusb ********
-Now, you can connect to RANOPT administrator and config network, equiment...
Thank you for your help file. It is useful.
BR

[venom]

Hi Lccengr
Now i resolved this problem:D
-First install Aircom and database as your method. (i used the newest Aircom patch).
- Use nempez ***** as usual
- Use david .reg file and vusb ********
-Now, you can connect to RANOPT administrator and config network, equiment...
Thank you for your help file. It is useful.
BR


ur welcome brother, can u post the link of the reg file, i am also looking for it

[lejun]

ur welcome brother, can u post the link of the reg file, i am also looking for it
Hi friend
http://www.finetopix.com/showthread.php?t=2220&highlight=aircom
Use both nempez file and david's .reg. It works fine with me:)
BR

[venom]

Hi friend
http://www.finetopix.com/showthread.php?t=2220&highlight=aircom
Use both nempez file and david's .reg. It works fine with me:)
BR

thanks buddy, i'll try it

[Eugene]

Ok Guys, at last i m successful in installing the Database with RANOPT Support. It means we are able to work on RANOPT as well with ASSET, maybe dongle is still needed, or emulation can do the job for u!! for AIRCOM ENTERPRISE 6.1 , you need a soft license :)

Please dont forget to click on thanks button and add my reputation !


Note: This is detailed step by step installation Guide of Aircom Enteprise v6.0 with picture support, RANOPT works fine with nempez *****, so you don't have to ***** it again. You need to have Oracle 10G (10.2.1) to have this installation and later you can use the same database for your ASSET as well. Enjoy

http://www.megaupload.com/?d=UMA61F0U


This Guide is written for 6.0 but you can follow the same steps for Enteprise 6.1

If you see the broken link then report me immediately so that i can upload it again, thanks

Dear Mr. venom,

Thank you for your article.

In this article, you mentioned the link which
contains the guide to install aircom product.

http://www.megaupload.com/?d=UMA61F0U

I tried above link, but I think it is dead.

Would you please repost the guide?

Best Regards,
Eugene

[Joel]

Tnx and hope to learn more from your article:)

[dong1709]

Hi man,

Can you give me password ? Open zip file

[jack_ryan]

anyone has RANOPT DB Template file, plz send to me ?

[jack_ryan]

anyone has RANOPT BD template, plz share it in 4share
thanks alot

[chiku]

Good Stuff

[sergsazan]

anyone has RANOPT BD template, plz share it in 4share
thanks alot
I'm also loking for RANOPT BD template. Could anyone put it to public fileshare (4share, mega-, rapid etc.)?
thanks in advance.

[adelmarco]

Please send the pass

Adel

[manuelito]

can you please send me password
meduardohn@hotmail.com
Thanks

[Bogus]

pw please to pm... your box is full

[mojiiiiii]

Hi friend
http://www.finetopix.com/showthread.php?t=2220&highlight=aircom
Use both nempez file and david's .reg. It works fine with me:)
BR

i cant see this link.
please share with me content of this

[Gharib]

Hi my Friend,
I have not permission to access that link, may you PLZ share the Nempez *****, & David reg file for me too?

BR

[Gharib]

Sorry my E-mail is:
gharibsena@gmail.com

BR

[venom]

I have removed the pwd of this rar file.

[jack_ryan]

I have removed the pwd of this rar file.

Hi venom !
Can you upload this file on 4share. I have no permission to access this page.
thanks alot.

[freakturd06]

Hi friend
http://www.finetopix.com/showthread.php?t=2220&highlight=aircom
Use both nempez file and david's .reg. It works fine with me:)
BR

Anybody still have the nempez cr@ck? Please share guys.

[mojiiiiii]

Dear All,

Here i am sharing the RANOPT DB Template. I will also publish the complete guide of installing it if i am successful. So it is your choice, whether to download it now or later.

Sorry Guys, i am working on it for quite while now and i may charge some credits on both of things.

294


hi friend.
i cannot download your guide from megaupload,please share it with me in rapidshare or 4shared.
meanwhile,i install Aircom 6.2 with lservrc (http://www.finetopix.com/attachments/forbidden-city/11167d1285174565-aircom-6-2-license-lservrc_works.rar) from zeuscane (http://www.finetopix.com/members/zeuscane.html),every feature is licensed.
does your solution for installing RANOPT DB Template work with this lservrc (http://www.finetopix.com/attachments/forbidden-city/11167d1285174565-aircom-6-2-license-lservrc_works.rar)? i mean,can i config network, equiment and etc ...

i add your rep
please help me in detail.

[royyanhadi]

Nice bro...
This is what i needed...

[ivandgreat]

anyone has RANOPT BD template, plz share it in 4share

:)

[ivandgreat]

Dear All,

Here i am sharing the RANOPT DB Template. I will also publish the complete guide of installing it if i am successful. So it is your choice, whether to download it now or later.

Sorry Guys, i am working on it for quite while now and i may charge some credits on both of things.

294

does it work with 11G?