ORIGINAL & BEST TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP)

[liana]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks

[anwar]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks

can you share all document needed for make tems on t610??:)

[siborjong]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks

I think this tutorial has been original post by parto_tegal

i'm right?

[yellowant]

Dear all,

I use TEM 7.0, but can not see SQI. Pls help!

[parto_tegal]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks

Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::

Best Regards
parto_tegal

[grid666]

Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::

Best Regards
parto_tegal

I concur, It was made by Seanna !!

While we consider "Laser" to be master of firmware playing and programming, Seanna on the other hand has much wider knowledge on real world application of TEMS and NEMO technologies.

[parto_tegal]

Dear Lovely Members
To make this post become more useful to everybody, herewith kindly find the FREE SOURCES for the said procedures:


hxxp://rapidshare.com/files/117185403/OTP.rarCredits goes to the-laser for the T68/T610 Calculator, originally posted here


hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMSHappy flashing...
Best Regards
parto_tegal

[liana]

thanks parto..
hope someone can share same sort of files for w600,k790,w800........

hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS
hxxp://rapidshare.com/files/117185403/OTP.rar
enjoy dear members :)

[shahram]

Is that applicable on any version of T610 handset,no CID preference?!

[hakima]

Yes,version is not the problem at all.

[liana]

any sources like this for 800i ??
plz share...

BR

[gsmart]

any sources like this for 800i ??
plz share...

BR

Yes there is!

But that's not free , If you want , send me PM for details.

GSMartist

[kadoel]

i'm finish make tems t610
bravo

[hassen]

thanks parto..
hope someone can share same sort of files for w600,k790,w800........

hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS
hxxp://rapidshare.com/files/117185403/OTP.rar
enjoy dear members :)
yes we hope !
but for free we need to wait until 2020 in châa alah

br hassen

[simmus0300]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks

where is the link. I can not see it.

[sonar_bangla]

i'm finish make tems t610
bravo

is t610 working with t803 ? plse

[butaktelco]

is t610 working with t803 ? plse

yes..its work fine on tems investigation 8.0.3

[lejun]

ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.

pwd: thanks
Hi friend
Please share again:D. I want to try this method. It is the first time i try to flash a phone:confused:.
Thanks

[devil_pandora]

thanks for your information

[kadoel]

is t610 working with t803 ? plse

udah dijawab ma butaktelco

yes work fine :D

[sonar_bangla]

hello my friends
if anyone share the tems making procedurein details or step by step or by vdo, it will be highly appreciated....

[kadoel]

hello my friends
if anyone share the tems making procedurein details or step by step or by vdo, it will be highly appreciated....

for tems t68/t610

original post: the_laser

http://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS

first, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div

[datmast]

but, as you know, we need good old terminator
difficult to buy it... do you know another way to flash it???


for tems t68/t610

original post: the_laser

http://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMSfirst, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div

[kadoel]

but, as you know, we need good old terminator
difficult to buy it... do you know another way to flash it???

yes, but you can make it :D

http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar

[siborjong]

yes, but you can make it :D

http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar

I'm not understand how to make it according your articel, can you explain it more spesific please...

[aaofik]

wew..om kadoel..ternyata bikinnya rumit om...hihih...nuhun yak

[aaofik]

buat pak boss parto_tegal hatur nuhun pak...hehehe

[datmast]

So difficult to make it....

yes, but you can make it :D

http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar

[kadoel]

wew..om kadoel..ternyata bikinnya rumit om...hihih...nuhun yak

gak jg kok sehari jd cuman IC nya aja ,musti pesen :D
it's easy :D

[datmast]

I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html

Can I use this way, or not???


yes, but you can make it :D

http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar

[siborjong]

I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html

Can I use this way, or not???

I have allready to read it but i found problem cause is difficult to search fighter or cruiser cable on indonesia :)

I'm tring to searching tutorial how to convert dcu-11 cable to T28 cable and findout flash file cabl :L

[kadoel]

I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html

Can I use this way, or not???

first, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div

red colour must by terminator dongle :D

[datmast]

T68 TEMS cable:

you can modify drs-11, dcu-11, bluetech, and other cheap t68 compatible cables to make it works with tems (up to K600). here's how:
1. open the cable housing (it's easy).
2. move the cable from pin 4 to 6, and from pin 5 to 7.

to get a dual port cable (for ms+dc), buy two t68 compatible cables (dcu-11 is highly NOT recommended for this due to its natural design) and do the following:
1. remove the cable from pin 4 of cable#1 and solder it to pin 6 of cable#2
2. remove the cable from pin 5 of cable#1 and solder it to pin 7 of cable#2
3. remove the cable from pin 10 of cable#1 and solder it to pin 10 of cable#2
now you'll get a dual port cables (2 usb [or serial] pc connectors with 1 phone connector), cable#1 is for ms and cable#2 is for dc.

pin 10-11 is the one that connected to your charger, so you'll know pin1-9.

to make a dual port cable with only 1 usb connector and 1 phone connector, you need to build it manually using ft2232 chip (not ft232). complete design is here:
Code:

http://www.ftdichip.com/Documents/Schematics/FT2232C/dual232.zip</pre>
ignore the rs232 level converter & led part.

[kadoel]

T68 TEMS cable:

you can modify drs-11, dcu-11, bluetech, and other cheap t68 compatible cables to make it works with tems (up to K600). here's how:
1. open the cable housing (it's easy).
2. move the cable from pin 4 to 6, and from pin 5 to 7.

to get a dual port cable (for ms+dc), buy two t68 compatible cables (dcu-11 is highly NOT recommended for this due to its natural design) and do the following:
1. remove the cable from pin 4 of cable#1 and solder it to pin 6 of cable#2
2. remove the cable from pin 5 of cable#1 and solder it to pin 7 of cable#2
3. remove the cable from pin 10 of cable#1 and solder it to pin 10 of cable#2
now you'll get a dual port cables (2 usb [or serial] pc connectors with 1 phone connector), cable#1 is for ms and cable#2 is for dc.

pin 10-11 is the one that connected to your charger, so you'll know pin1-9.

to make a dual port cable with only 1 usb connector and 1 phone connector, you need to build it manually using ft2232 chip (not ft232). complete design is here:
Code:

http://www.ftdichip.com/Documents/Schematics/FT2232C/dual232.zip</pre>
ignore the rs232 level converter & led part.

this cable for TI (or MA8910 cable ) not for flashing TEMS T68T610 :D:D

[aaofik]

so if we want to flash..we need DIV USB cable :(??

wew..hard to find this cable.

hope anyobe able to teach me how to flaz z800i aka TEMS6

[kadoel]

so if we want to flash..we need DIV USB cable :(??

wew..hard to find this cable.

hope anyobe able to teach me how to flaz z800i aka TEMS6

yes need DIV USB :D
beli or buat :p

[siborjong]

yes need DIV USB :D
beli or buat :p

Can you share where to buy it

Belinya dimana bro dan gimana cara buatnya :D

[kadoel]

Can you share where to buy it

Belinya dimana bro dan gimana cara buatnya :D

cucah bangets nyarinya jadi nekad buat antara jadi or gak :L
tapi akhirnya jadi juga dech :P

PM gw klo mo nyoba buat :cool:

[gprastomo]

Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::

Best Regards
parto_tegal

Edan tenan. Mas Parto kuwi opo2 ngerti, sangar

[parto_tegal]

Edan tenan. Mas Parto kuwi opo2 ngerti, sangar

What are you talking about? English please...
parto_tegal

[gprastomo]

What are you talking about? English please...
parto_tegal

unbelievable, brother parto knows everything, unbelievable

br

[gyb820703]

thanks ！！:p

[tor524e]

thanks. i was looking for this for a long time. :D