View Full Version : ORIGINAL & BEST TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP)
liana
2009-01-22, 09:33 AM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
anwar
2009-01-22, 10:39 AM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
can you share all document needed for make tems on t610??:)
siborjong
2009-01-23, 12:13 AM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
I think this tutorial has been original post by parto_tegal
i'm right?
yellowant
2009-01-23, 02:34 AM
Dear all,
I use TEM 7.0, but can not see SQI. Pls help!
parto_tegal
2009-01-23, 03:13 AM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::
Best Regards
parto_tegal
grid666
2009-01-23, 03:41 AM
Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::
Best Regards
parto_tegal
I concur, It was made by Seanna !!
While we consider "Laser" to be master of firmware playing and programming, Seanna on the other hand has much wider knowledge on real world application of TEMS and NEMO technologies.
parto_tegal
2009-01-23, 04:05 AM
Dear Lovely Members
To make this post become more useful to everybody, herewith kindly find the FREE SOURCES for the said procedures:
hxxp://rapidshare.com/files/117185403/OTP.rarCredits goes to the-laser for the T68/T610 Calculator, originally posted here
hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMSHappy flashing...
Best Regards
parto_tegal
liana
2009-01-23, 06:32 AM
thanks parto..
hope someone can share same sort of files for w600,k790,w800........
hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS
hxxp://rapidshare.com/files/117185403/OTP.rar
enjoy dear members :)
shahram
2009-01-24, 05:52 PM
Is that applicable on any version of T610 handset,no CID preference?!
hakima
2009-01-24, 07:01 PM
Yes,version is not the problem at all.
liana
2009-01-25, 03:41 AM
any sources like this for 800i ??
plz share...
BR
gsmart
2009-01-26, 09:08 PM
any sources like this for 800i ??
plz share...
BR
Yes there is!
But that's not free , If you want , send me PM for details.
GSMartist
kadoel
2009-03-21, 02:11 AM
i'm finish make tems t610
bravo
hassen
2009-03-21, 06:07 AM
thanks parto..
hope someone can share same sort of files for w600,k790,w800........
hxxp://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS
hxxp://rapidshare.com/files/117185403/OTP.rar
enjoy dear members :)
yes we hope !
but for free we need to wait until 2020 in châa alah
br hassen
simmus0300
2009-03-21, 12:33 PM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
where is the link. I can not see it.
sonar_bangla
2009-04-06, 04:08 PM
i'm finish make tems t610
bravo
is t610 working with t803 ? plse
butaktelco
2009-04-06, 04:27 PM
is t610 working with t803 ? plse
yes..its work fine on tems investigation 8.0.3
lejun
2009-04-06, 05:10 PM
ORIGINAL & BEST **** TEMS PHONE MAKING GUIDE (LASER"S) (STEP BY STEP with screenshot) for t610.
pwd: thanks
Hi friend
Please share again:D. I want to try this method. It is the first time i try to flash a phone:confused:.
Thanks
devil_pandora
2009-04-06, 07:23 PM
thanks for your information
kadoel
2009-04-06, 07:29 PM
is t610 working with t803 ? plse
udah dijawab ma butaktelco
yes work fine :D
sonar_bangla
2009-04-07, 12:24 AM
hello my friends
if anyone share the tems making procedurein details or step by step or by vdo, it will be highly appreciated....
kadoel
2009-04-07, 02:57 PM
hello my friends
if anyone share the tems making procedurein details or step by step or by vdo, it will be highly appreciated....
for tems t68/t610
original post: the_laser
http://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMS
first, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div
datmast
2009-04-07, 03:50 PM
but, as you know, we need good old terminator
difficult to buy it... do you know another way to flash it???
for tems t68/t610
original post: the_laser
http://forum.gsmhosting.com/vbb/showthread.php?t=430114&highlight=TEMSfirst, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div
kadoel
2009-04-07, 11:37 PM
but, as you know, we need good old terminator
difficult to buy it... do you know another way to flash it???
yes, but you can make it :D
http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar
siborjong
2009-04-08, 07:44 PM
yes, but you can make it :D
http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar
I'm not understand how to make it according your articel, can you explain it more spesific please...
aaofik
2009-04-08, 08:12 PM
wew..om kadoel..ternyata bikinnya rumit om...hihih...nuhun yak
aaofik
2009-04-08, 08:14 PM
buat pak boss parto_tegal hatur nuhun pak...hehehe
datmast
2009-04-09, 12:28 PM
So difficult to make it....
yes, but you can make it :D
http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar
kadoel
2009-04-09, 01:57 PM
wew..om kadoel..ternyata bikinnya rumit om...hihih...nuhun yak
gak jg kok sehari jd cuman IC nya aja ,musti pesen :D
it's easy :D
datmast
2009-04-09, 03:32 PM
I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html
Can I use this way, or not???
yes, but you can make it :D
http://rapidshare.com/files/218519112/Terminator_Dongle_Hex_Schem.rar
siborjong
2009-04-09, 08:18 PM
I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html
Can I use this way, or not???
I have allready to read it but i found problem cause is difficult to search fighter or cruiser cable on indonesia :)
I'm tring to searching tutorial how to convert dcu-11 cable to T28 cable and findout flash file cabl :L
kadoel
2009-04-09, 09:20 PM
I found some guides to flash Sony E******* without terminator:
http://forum.gsmhosting.com/vbb/showthread.php?t=214966
http://www.gsmcity.com.ua/downloads/cat_24.html
Can I use this way, or not???
first, you must flash tems firmware with div
next, you should read gdfs area with setool
third, you need calculate tems code for your gdfs
fourth, you need write it with div
red colour must by terminator dongle :D
datmast
2009-04-10, 02:02 PM
T68 TEMS cable:
you can modify drs-11, dcu-11, bluetech, and other cheap t68 compatible cables to make it works with tems (up to K600). here's how:
1. open the cable housing (it's easy).
2. move the cable from pin 4 to 6, and from pin 5 to 7.
to get a dual port cable (for ms+dc), buy two t68 compatible cables (dcu-11 is highly NOT recommended for this due to its natural design) and do the following:
1. remove the cable from pin 4 of cable#1 and solder it to pin 6 of cable#2
2. remove the cable from pin 5 of cable#1 and solder it to pin 7 of cable#2
3. remove the cable from pin 10 of cable#1 and solder it to pin 10 of cable#2
now you'll get a dual port cables (2 usb [or serial] pc connectors with 1 phone connector), cable#1 is for ms and cable#2 is for dc.
pin 10-11 is the one that connected to your charger, so you'll know pin1-9.
to make a dual port cable with only 1 usb connector and 1 phone connector, you need to build it manually using ft2232 chip (not ft232). complete design is here:
Code:
http://www.ftdichip.com/Documents/Schematics/FT2232C/dual232.zip</pre>
ignore the rs232 level converter & led part.
kadoel
2009-04-10, 09:00 PM
T68 TEMS cable:
you can modify drs-11, dcu-11, bluetech, and other cheap t68 compatible cables to make it works with tems (up to K600). here's how:
1. open the cable housing (it's easy).
2. move the cable from pin 4 to 6, and from pin 5 to 7.
to get a dual port cable (for ms+dc), buy two t68 compatible cables (dcu-11 is highly NOT recommended for this due to its natural design) and do the following:
1. remove the cable from pin 4 of cable#1 and solder it to pin 6 of cable#2
2. remove the cable from pin 5 of cable#1 and solder it to pin 7 of cable#2
3. remove the cable from pin 10 of cable#1 and solder it to pin 10 of cable#2
now you'll get a dual port cables (2 usb [or serial] pc connectors with 1 phone connector), cable#1 is for ms and cable#2 is for dc.
pin 10-11 is the one that connected to your charger, so you'll know pin1-9.
to make a dual port cable with only 1 usb connector and 1 phone connector, you need to build it manually using ft2232 chip (not ft232). complete design is here:
Code:
http://www.ftdichip.com/Documents/Schematics/FT2232C/dual232.zip</pre>
ignore the rs232 level converter & led part.
this cable for TI (or MA8910 cable ) not for flashing TEMS T68T610 :D:D
aaofik
2009-04-17, 06:46 PM
so if we want to flash..we need DIV USB cable :(??
wew..hard to find this cable.
hope anyobe able to teach me how to flaz z800i aka TEMS6
kadoel
2009-04-17, 11:03 PM
so if we want to flash..we need DIV USB cable :(??
wew..hard to find this cable.
hope anyobe able to teach me how to flaz z800i aka TEMS6
yes need DIV USB :D
beli or buat :p
siborjong
2009-04-18, 03:31 PM
yes need DIV USB :D
beli or buat :p
Can you share where to buy it
Belinya dimana bro dan gimana cara buatnya :D
kadoel
2009-06-04, 03:45 PM
Can you share where to buy it
Belinya dimana bro dan gimana cara buatnya :D
cucah bangets nyarinya jadi nekad buat antara jadi or gak :L
tapi akhirnya jadi juga dech :P
PM gw klo mo nyoba buat :cool:
gprastomo
2009-06-04, 06:34 PM
Hohaaaaaaaa..... I can proof that this document was made by Seanna, not by the_laser, but based on the_laser's method...
::peace::
Best Regards
parto_tegal
Edan tenan. Mas Parto kuwi opo2 ngerti, sangar
parto_tegal
2009-06-04, 07:00 PM
Edan tenan. Mas Parto kuwi opo2 ngerti, sangar
What are you talking about? English please...
parto_tegal
gprastomo
2009-06-04, 07:16 PM
What are you talking about? English please...
parto_tegal
unbelievable, brother parto knows everything, unbelievable
br
gyb820703
2009-11-01, 11:20 AM
thanks !!:p
tor524e
2009-11-19, 02:44 PM
thanks. i was looking for this for a long time. :D
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.