Remote E******* Node B from the Other BTS or ML-Craft

[spiderman]

Dear all,

Anyone know how to remote e******* Node B using RBS Element Manager software from ML-Craft/NEC Pasolink or other Node B?
I can only remote Node B using RBS Element Manager from MSC or BSC, but not successful in other sites/BTS.
I can remote using Secure CRT from the other site/BTS, but i need to open RBS EM cause i need data capture for it.

Anyone can be sharing, what the different between RBS EM with Secure CRT?
What port they used?
Why i can't be connected used RBS EM, but available with Secure CRT?
is there any i have to configure first?

Anyone know how to remote Node B using team viewer??? I can ping Node B IP default, but when open main window RBS EM, it wil be stack, no progress to show main window menu.

Need your's advice please.......


Note :I am sorry for my bad english bro.:(

[Mctest]

Hi!if you have ping or you can open telnet session towards RBS,but no success with EM,try to change date on your PC to 2010 year for example!

[spiderman]

Have u tried this trick bro???
I can ping, telnet, cgywin moshell and Secure CRT, but i can't used RBS EM. When i using RBS EM, always stack on the main windows. I can't see sub menu tree equipment, IP, IP relation and etc others, Maybe is there many configuration setting like ipconfig bro?

Could you even tried to remote by remote deskop like Team Viewer or etc like this bro???

[Mctest]

Yes,I tried!Change the date and you will see!

[manel21]

Is a java licence problem...

[spiderman]

tried to change the date not succesfull bro. i had tried to change the date to 2009, 2010, also 2011.
For Bro Manel21, can u explain more bro? As my opinion, if there is something wrong with Java license, why i can open all node B from MSC/BSC???

Also, maybe need review for my question :
1. On MSC/BSC i can used RBS Element Manager (RBS EM) to remote all site,
2. On other sites/BTS, used ML-TN or NEC Pasolink as a interchange connection, i can't used RBS Element Manager (RBS EM) to remote all site, but i can open it with SecureCRT and Cgywin Moshell.

Thanks for all of your answer bro.

[manel21]

Hello mate,

I had this problem the last week,,, I turned crazy with this problem and finally, one friend change me the date system of my laptop and i can loggin success into EMAS with E******* RBS 3518.

Bye

[spiderman]

Let me explain anymore bro.
i am stay on Site A, and want to be remotely node B on site B.
Anyone know how to make connection to Node B on site B, with interface ML-TN or NEC Pasolink?
What IP should be i have to know and what configuration on my LAN Connection?

For simple task, I want to be as like a RNC team on site. So I can remote other Node B.

[edmar_tubil]

Let me explain anymore bro.
i am stay on Site A, and want to be remotely node B on site B.
Anyone know how to make connection to Node B on site B, with interface ML-TN or NEC Pasolink?
What IP should be i have to know and what configuration on my LAN Connection?

For simple task, I want to be as like a RNC team on site. So I can remote other Node B.

If using TN try to configure your ethernet. By using Layer 1 or layer2 config,you will be able to access the NodeB on remote site. Your TN(Microwave network) will act as cable connected end to end. For procedures how to configure the ethernet,search this site and look for that 4.3FP or higher library.

BR///
Edmar

[zekerdog]

Thanks! I have been pulling my hair out for the past couple of days trying to get it to work. I set the date back to 2010, came right up.