Huawei Drive Test tool-Probe v3.5 [Archive]

View Full Version : Huawei Drive Test tool-Probe v3.5

GEZA

2012-01-24, 07:02 PM

Installer (http://www.4shared.com/file/YKkDrUbu/ProbeV300R005C00SPC100T-Hard-v.html)

Related product info:


<tbody>
No.
Product Name
Product Version
Remarks

1
GENEX Assistant 2.3
V200R003C00SPH402 and later
Analyzes data collected by the Probe. It supports analysis of data collected from UE2.0 but does not support analysis of data collected from the following data cards or scanners: B390, E398S, E2701, E398.Pctel MX, and R&S TSMW.

2
GENEX Assistant 3.3
V300R003C02SPC200 and later
Analyzes data collected by the Probe. Currently, the Assistant can analyze the GSM, UMTS and LTE TDD/FDD data.

3
GENEX PHU
V100R002, V100R003
Works with the Probe to collect data.

4
Hisi E398S and E2701 terminal
V100R001C00B201 and later
Both terminals must use the drive test versions. Typical commercial terminals do not support drive test functions.

5
Hisi UE Agent
Hisi UE Agent (Polaris V100R001B210) and later
Hisi UE Agent (Polaris V100R001B160) is adapter to GENEX Probe V200R003C01SPC300.

6
E398 terminal
E398u - 15
Firmware Version: 11.335.21.00.000

7
E397 terminal
E397u - 53
Firmware Version: 11.335.04.01.000.B726

8
E392 terminal
E392u-12
Firmware Version: 11.335.21.00.000

9
UE3.0 terminal
LTE UE V200R005C00B021

</tbody>

24044

beniy

2012-01-25, 06:39 AM

Installer (http://www.4shared.com/file/YKkDrUbu/ProbeV300R005C00SPC100T-Hard-v.html)

24044
Hi Admin,

Thanks for good information
I think med is not available in forum.!

hp3hp3

2012-01-25, 01:36 PM

Hi Admin,

Thanks for good information
I think med is not available in forum.!
this work with old med
work with DNG file and SENTEMUL2007 ;)

rfoptman

2012-01-25, 01:50 PM

Please re-ulpload the med or share the Med Address link!

hp3hp3

2012-01-25, 02:00 PM

this is med work with this ver

auto_art

2012-01-25, 03:02 PM

this is med work with this ver

will revert after testing.!
pl load UE firmware also so we can make it operational.

kentck86

2012-02-03, 12:09 AM

Kindly share your pass please, your default pass: hp312345
is not working

this is med work with this ver

jamesbond

2012-02-03, 02:36 PM

Thanks. Hope you share the password soon.

Laughing

2012-02-04, 09:46 PM

this is med work with this ver

Hi friend,

Please update your password. We're waiting your feedback! Thanks.

beniy

2012-02-05, 05:14 AM

this is med work with this ver
Dear Hp3hp3,
My friend please share pass thanks

kentck86

2012-02-08, 10:11 PM

Can anyone please guide me how to operate sentinel emulator 2007 please? does it work on Windows 7 64 bits? as my load dump button was disabled after i run install driver.

thank you

linuxxcso

2012-02-09, 11:53 AM

hp3hp3,please share pass for thanks

ryuzaki_steven

2012-02-19, 04:57 AM

try this, maybe it is same file with hp3hp3's attachment (sentemul2007 and genex probe 2.3 dng)

omar mohsen

2012-02-19, 08:55 AM

hi i am looking for good stuff in drive test as i want to read some, any help please?

patek1968

2012-02-19, 06:45 PM

Can anyone please guide me how to operate sentinel emulator 2007 please? does it work on Windows 7 64 bits? as my load dump button was disabled after i run install driver.

thank you

it works on windows 7 32bits, make sure you will install as administrator when installing driver of the sentinel..and use sentinel 2007 as i did. Hope it helps.

saullow

2012-05-20, 10:12 AM

try this, maybe it is same file with hp3hp3's attachment (sentemul2007 and genex probe 2.3 dng)

that solution is expired

diego_fernando

2012-07-30, 01:43 AM

I hope to serve you, please add reputation

- SENTEMUL2007
- Sentinel System Driver Installer 7.5.7
- Key. Dng

steps to use in windows 7 x64

A. - On a pc with windows xp x32 bit install Genex probe, then install add Sentinel System Driver Installer 7.5., Then use the SENTEMUL2007, the driver option click on "install driver" option in the emulator then click "start service "dongles then click the option" load dump ", load the key. dng

2. - Use the file sprodmp PVA 3.3 and run, check the "Brute WP" and then clicking on "Dump Key (s)" which generates a xxxxxxxxxxxxxxxxxxx.dmp, change the short name for a example key.dmp

3. - Copy the folder dmp2mkey in the C: drive in the folder key.dmp place the file, then open the cmd command line to start going ejcutar cmd in xp window 7 ejcutar click cmd and put the screen will open there must be in the following line C: \> dmp2mkey \ and we write the following "dmp2mkey key.dmp" should be as follows "C: \> dmp2mkey \ dmp2mkey key.dmp " which we generate a file. reg file that we have a copy machine with windows 7

4. - In a machine with windows 7 x64 install Genex probe, also install Genex share, also installing Sentinel System Driver Installer 7.5.7.

5. - then the a machine with Windows 7, run the option dseo13b click on the "test mode" then next, then you must run the file "install.bat" located in the "multikey64" and you will see a message that the file is unsigned and give you the option to install anyway if you give him and settle, then the file dseo13b select the option "sign to file system" then next, on the next screen you enter the location the "multikey.sys" must equal "C: \ Windows \ System32 \ drivers \ multikey.sys" ok then you give

5. - Ahoara must install the. Reg file that was generated in 32-bit Windows XP machine

and finally you must restart the machine

I hope to serve you, please add reputation

28887

nale

2012-09-23, 08:11 AM

No Sentemul needed anymore, check here:

http://www.finetopix.com/showthread.php?15581-Genex-Assistant-3.3-source-!!&p=191280&viewfull=1#post191280

I hope to serve you, please add reputation

- SENTEMUL2007
- Sentinel System Driver Installer 7.5.7
- Key. Dng

steps to use in windows 7 x64

A. - On a pc with windows xp x32 bit install Genex probe, then install add Sentinel System Driver Installer 7.5., Then use the SENTEMUL2007, the driver option click on "install driver" option in the emulator then click "start service "dongles then click the option" load dump ", load the key. dng

2. - Use the file sprodmp PVA 3.3 and run, check the "Brute WP" and then clicking on "Dump Key (s)" which generates a xxxxxxxxxxxxxxxxxxx.dmp, change the short name for a example key.dmp

3. - Copy the folder dmp2mkey in the C: drive in the folder key.dmp place the file, then open the cmd command line to start going ejcutar cmd in xp window 7 ejcutar click cmd and put the screen will open there must be in the following line C: \> dmp2mkey \ and we write the following "dmp2mkey key.dmp" should be as follows "C: \> dmp2mkey \ dmp2mkey key.dmp " which we generate a file. reg file that we have a copy machine with windows 7

4. - In a machine with windows 7 x64 install Genex probe, also install Genex share, also installing Sentinel System Driver Installer 7.5.7.

5. - then the a machine with Windows 7, run the option dseo13b click on the "test mode" then next, then you must run the file "install.bat" located in the "multikey64" and you will see a message that the file is unsigned and give you the option to install anyway if you give him and settle, then the file dseo13b select the option "sign to file system" then next, on the next screen you enter the location the "multikey.sys" must equal "C: \ Windows \ System32 \ drivers \ multikey.sys" ok then you give

5. - Ahoara must install the. Reg file that was generated in 32-bit Windows XP machine

and finally you must restart the machine

I hope to serve you, please add reputation

28887