View Full Version : ******** Tetra MTP700 firmware Clear 3.1.6
Motorola
2012-01-16, 05:59 PM
Attached is Firmware for old ******** Tetra handheld radio MTP700
Hope it can help to people who own old radio :-)
regards
hgarin
2012-05-26, 06:45 PM
hello, would you please send me the file, since I can not download hgarin@hotmail.com q thank you very much
-bup-
2012-05-28, 07:42 PM
Hi,
I found a little more recent release: R03.000.3375 MTP700 (MR3.6.1E)
dies33
2012-09-19, 06:30 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater
cammedia
2012-10-07, 06:50 PM
Please could you send the latest version to me? I can't download...
hans-heesbeen$hotmail .com change $ to @ and remove space please.
AnRegs
2012-11-19, 12:15 AM
Guys,
I need R03.000.3375 MTP700 MR3.6.1E.rar (http://www.finetopix.com/attachment.php?attachmentid=27629&d=1338201704) file. Please email to: wireless.friendly # gmail.com
jandri0309
2013-02-25, 04:22 AM
Hi. Can some one email me the MTP-700 programming software?
regards.
allstar44
2013-02-25, 05:11 AM
I´m also looking for MTP-700 programming software. I´d appreciate it if someone could email it to me.
Best regards
jandri0309
2013-02-25, 05:11 AM
my email is andri_rescue hotmail.com
-bup-
2013-02-25, 09:25 AM
Hi,
Here is CPS R70.44.09 MR2.0 FVN5051E from May.30.2002 (MTH500-MTP700-MTM700)
Please, contribute to forum too !
-bup-
2013-02-25, 09:30 AM
last files...
:D
chipetto
2013-04-07, 05:08 PM
thanks for th software
reagards form holland
kikina
2014-01-20, 09:51 PM
Please could you send the sotware CPS R70.44.09 MR2.0 FVN5051E to me? I can't download... email: pcermy1@seznam.cz Thanks.
welshychris
2014-02-09, 06:52 PM
Hi, I'm just wondering will the R70.44.09 MR2.0 FVN5051E (http://www.finetopix.com/attachment.php?attachmentid=31783&d=1361752143) firmware upgrade the MTM700 and if it will enable repeater mode, I've seen around the internet people mentioning that it does?
ludek-brno
2014-02-19, 04:30 AM
Hello,I Have MTP700 fw 03.000.3357;CPver 80.44.09 I need soft version for preproggrammed my private radios. Soft version TETRACPS FVN5051E R1.2 R70.44.09 not supported Codeplug.Please,Version is available for this type ? ludek from Brno-CZ e-mail: ludek-brno@volny.cz .Thank You for infos.
ludek-brno
2014-03-04, 02:21 AM
Hello,send my please this attachment files(R03.000.3375 MTP700 MR3.6.1E.rar) to mail ludek-brno@volny.cz Thank You. Ludek
sjakie
2014-03-26, 02:30 AM
hello, would you please send me the file, since I can not download j_schuurman@onnet.nl
sjakie
2014-03-26, 02:33 AM
hello, would you please send me the file, since I can not download j_schuurman@zonnet.nl
Hi there,
Is it possible you send me a copy since I do not have privileges to download it directly yet.
Will have my first mtp this evening and very interested in reading and modifying the codeplug.
Many thanks!
Ruut
Hello Bup,
Is it possible that you send me a version to program my mtp700?
You can reach me @ ruutbol at hotmail dot com...
Many thanks,
Ruut
zhilamian
2014-10-19, 07:26 PM
hi,there
could you please send this cpsR70.44.09 MR2.0 FVN5051E to me ?
i can't download ,thanks a lot
email:zhilamian@sina.com
zhilamian
2014-10-19, 07:29 PM
hi,
could you sand the cps(MR3.1.6E) to me? i have looking for this for a loooooooooooong time.thank a lot. I can't download this attachment.
email:zhilamian@sina.com
jandri0309
2014-10-20, 02:38 AM
Hi, I will email you the file.
Regards.
Jack1949
2014-10-30, 01:41 AM
Hi, I can't download this. Can you send the software? jack-trees@hotmail.com
thanks Jack
rcs96
2014-12-19, 10:45 AM
Halo, I can't download this software, Will jou send the Sofware to me?
Me E-mail: rcs96@ziggo.nl
Thanks Rudy
iliketetra
2015-02-21, 12:01 PM
HI all, I know that this is another Gimme, but I would really like to have the CPS R70.44.09 MR2.0 FVN5051E files emailed to me as I cannot download them. ev351@hotmail.com
Thanks a lot.
kondoros
2015-03-19, 06:49 AM
R03.000.3375 MTP700 (http://www.finetopix.com/attachment.php?attachmentid=27629&d=1338201704) file is corrupted and almost bricked my MTP700
Alwin-R09
2015-05-20, 11:56 PM
Hello,
Its a huge topic kick, but is there someone who could mail me the programming software addressed in this topic? I'm a new member and don't have the authorisation to download yet! My email is redstarf1@hotmail.com!
A very big thanks for the one who can help me!
Greetings,
Alwin from The Netherlands
wygiwia
2015-06-24, 04:04 AM
I would really much appreciate the software as well, since I'm also not able to download yet.
********(at)mijndata.nl
nintrew
2015-06-24, 04:16 AM
both of you got mail
raska_69
2016-02-06, 07:23 AM
Hi.
Someone is kind enough to send for my r03.000.3375 my email address?
raska_69@hotmail.com
Thanks in advance!
580-Gabor
2016-02-07, 02:43 AM
Please see your e-mail !
yo3gts
2016-06-28, 09:45 PM
Anyone has information about RIB for MTP700?
-bup-
2016-06-28, 11:48 PM
Hi,
'Official' programming requiers FLN9636 cable and PMLN4510 programming stand as describe here:
You can also build 'home-made' RIB using max232 and using radio pin1 for ground, pin2 for Data in and pin3 for Data out.
A homemade programming cable for MTP700 is easier then thought, just use a cheap TTL converter with the ability to change voltage.
Important is to set it to 3.3V, and connect to pin1 (ground), 2 (TX), and 3 (RX).
Cost me only 1,50 EU....
Booghi
2017-06-24, 07:25 PM
Please anyone can send me a clear firmware by email for a MTP700? I'm new in forum and i can't download. I erased the sorftware from radio and now i'm in a big shit. I think that R03.000.3375 will work. My email is : bori@yahoo.com. Thank you in advance.
580-Gabor
2017-06-28, 06:48 PM
Im uploaded the R030003357.z19 file to Mega.nz.
Download here:
https://mega.nz/#!4UsX0ZSL!QFM3GYdhqMWuM3NC6mZUinAN6LrRckXrsmkU0l75tBs
shahnavazi
2017-07-02, 08:51 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater
580-Gabor
2017-07-02, 05:08 PM
There even is such a thing, but i don't have it.
40650
AnRegs
2017-07-03, 01:56 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater
Yes, it's existing.
RA1AIE
2017-07-05, 07:42 AM
Yes, it's existing.
...and you need to have Depot for MTP700 to do this trick :)
580-Gabor
2017-07-05, 05:28 PM
Maybe the Depot CPS MR 5.11 (R 6D.581.03) PMVN4196A ?
AnRegs
2017-07-06, 04:57 AM
...and you need to have Depot for MTP700 to do this trick :)
I can't recall details, but I have been done it a few years ago. And DMO repeater is part of radio menu now.
-bup-
2017-07-06, 05:33 AM
"Maybe the Depot CPS MR 5.11 (R 6D.581.03) PMVN4196A ?"
MR5.11 is not compatible with MR3.1.6
580-Gabor
2017-07-06, 05:22 PM
Now i'm find it: R7A.398.01 LAB (it is compatible with MR3.1.6).
https://mega.nz/#!8I93CKrS!sMQESzFibU4dVT71khvDIk9dM7KX7md1FZsjo9RM7K8
I just need a transceiver.
RA1AIE
2017-07-06, 08:20 PM
It's good, but MR3.1.6 firmware doesn't contains DMO Repeater code :)
AnRegs
2017-07-06, 10:11 PM
I can suppose that DMO Repeater is it R03.000.3375 - MR3.6.1E release.
580-Gabor
2017-07-07, 02:00 AM
Hi there,
it is on the ex hackersrussia FTP-site:
1.823 KB
R03.000.3375 MTP700 MR3.6.1E.rar
19.11.2012
I dont have it anymore :-( It was on my old HDD
explorers
2017-12-12, 08:58 AM
Please see your e-mail !
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.