Jeujeu
2011-11-23, 09:47 PM
Hi experts out there.
Maybe you can help me. I want to set an RBS3116 to transmit without Iub connection to a RNC, so stand-alone. I managed to login on the I2C port of the RU22 2140 radio (not via Test port of the CBU!!)which gives me some moshell possibilities to set and read certain data (see below for main menu). Is anybody experienced with this or, do you have other solutions to set the RBS3116 to transmit?
Any kind of help is appreciated! Thanks!!
$ $ help
Command Description
default shell command
. execute commands from file
? print description of commands
ai Access to the AI Interface
atf Execute ATF command
au3vii Print LED status for all AU3 units or the selected one (au3==AU-type).
biosls List installed bios modules
bl list blocks
capi
carrierListHandler Carrier List Handler Test Interface
ccie CCIE shell cmd
cfheflist Get active fault list
cfhefmap Get fault mapping
ch Measurement/Correction Channel test interface
channel Measurement/Correction Channel test interface
clipinfo 'clipinfo <id>' replaces 'sputnik get dev <id>'
cls clear screen (using ANSI codes)
comb XPAI fault test commands.
connfss connect to remote fss
crstatuscordin Carrier Status Coordination Test Interface
date print or set/adjust date & time
db Operations on the Radio SW Database content
dp Start or stop the DP.
dpcl Access to the DPCL Unit Interface
dumph dump heap info or list all heaps
echo echo arguments (-n no newline)
errno print description of errno number
fm Access to the RU faults
fpga FPGA driver test interface
fssls list fss objects
fu Access to the FU CBC Interface
fu_debug Antenna short circuit debug interface
fui Filter unit test interface
getpri Show the priority of a process
gio Access to the general IO ports
hal HW Abstraction Layer Test Interface
help print description of commands
hostname show or set hostname
hwlog Manages hardware log.
intercept intercept process/block
keys configure/display terminal key settings
kill kill process/block
krkComp KirkeCompensation driver test interface
link Link control.
linkstat Print RS485 link, L2 protocol HDLC, UNC and UCC state and statistics.
linkstat2 Print CPRIi2 link, L2 protocol HDLC, UAC state and statistics.
listenv list environment variables for <processes> and their corresponding block.
llog Read error log
lmcdelete Delete a loadfile
lmclist Displays a list of loadfiles
lmlist Displays a list of subfiles in lmc lfIx, or current lmc if lfIx is not given
loadaubootmode Enter state where reload of AUBOOT is possible
ncoReset Restart NCOs
nodeid Manages node id.
pa Access to the PA unit interface
par Manages board parameters
pmd Read or clear post mortem dump
poolinfo List information about pools
ps list processes
qs List signals in a process signal queue
rcmd remote command execution
readmem Read length byte from address and print result in shell.
restart Restarts the xp board.
resume resume process/block
rlc Clear the ramlog
rld Display ramlog
rlw Write a string to the ramlog
rtcscale print or set RTC/hwclock scale
ru Access to the CBC RU Unit interface
run Resume all intercepted processes
setenv set/list environment variable [for block] [for process]
setpri Change the priority of a process
shell invoke shell
sigs List information about signals
sleep sleep a while
spi SPI driver test interface
ss Show maximum process stack usage
start start process/block
startapp start application <program>
stop stop process/block
subsc Lists all subscriptions.
sv ChannelSupervision test interface
tc TempCompensation driver test interface
te Trace & Error Handling commands
term display info about terminal
timezone configure RTC with timezone data
tpa Access to the TPA Unit Interface
tr Access to the CDCI-TR Interface
trx Access to the trxLib command interface
tsh Test Shell
uic UIC interrupt information.
uic2 UIC2 or UIC3 interrupt information.
unsetenv remove environment variables [from block] [from process]
uptime display system uptime
vddc Vdd Compensation test interface
vii Displays current LED request. 'vii d' gives more details
warp Warp driver test interface
who list who is logged on
xpp XPP test interface
$ $
Maybe you can help me. I want to set an RBS3116 to transmit without Iub connection to a RNC, so stand-alone. I managed to login on the I2C port of the RU22 2140 radio (not via Test port of the CBU!!)which gives me some moshell possibilities to set and read certain data (see below for main menu). Is anybody experienced with this or, do you have other solutions to set the RBS3116 to transmit?
Any kind of help is appreciated! Thanks!!
$ $ help
Command Description
default shell command
. execute commands from file
? print description of commands
ai Access to the AI Interface
atf Execute ATF command
au3vii Print LED status for all AU3 units or the selected one (au3==AU-type).
biosls List installed bios modules
bl list blocks
capi
carrierListHandler Carrier List Handler Test Interface
ccie CCIE shell cmd
cfheflist Get active fault list
cfhefmap Get fault mapping
ch Measurement/Correction Channel test interface
channel Measurement/Correction Channel test interface
clipinfo 'clipinfo <id>' replaces 'sputnik get dev <id>'
cls clear screen (using ANSI codes)
comb XPAI fault test commands.
connfss connect to remote fss
crstatuscordin Carrier Status Coordination Test Interface
date print or set/adjust date & time
db Operations on the Radio SW Database content
dp Start or stop the DP.
dpcl Access to the DPCL Unit Interface
dumph dump heap info or list all heaps
echo echo arguments (-n no newline)
errno print description of errno number
fm Access to the RU faults
fpga FPGA driver test interface
fssls list fss objects
fu Access to the FU CBC Interface
fu_debug Antenna short circuit debug interface
fui Filter unit test interface
getpri Show the priority of a process
gio Access to the general IO ports
hal HW Abstraction Layer Test Interface
help print description of commands
hostname show or set hostname
hwlog Manages hardware log.
intercept intercept process/block
keys configure/display terminal key settings
kill kill process/block
krkComp KirkeCompensation driver test interface
link Link control.
linkstat Print RS485 link, L2 protocol HDLC, UNC and UCC state and statistics.
linkstat2 Print CPRIi2 link, L2 protocol HDLC, UAC state and statistics.
listenv list environment variables for <processes> and their corresponding block.
llog Read error log
lmcdelete Delete a loadfile
lmclist Displays a list of loadfiles
lmlist Displays a list of subfiles in lmc lfIx, or current lmc if lfIx is not given
loadaubootmode Enter state where reload of AUBOOT is possible
ncoReset Restart NCOs
nodeid Manages node id.
pa Access to the PA unit interface
par Manages board parameters
pmd Read or clear post mortem dump
poolinfo List information about pools
ps list processes
qs List signals in a process signal queue
rcmd remote command execution
readmem Read length byte from address and print result in shell.
restart Restarts the xp board.
resume resume process/block
rlc Clear the ramlog
rld Display ramlog
rlw Write a string to the ramlog
rtcscale print or set RTC/hwclock scale
ru Access to the CBC RU Unit interface
run Resume all intercepted processes
setenv set/list environment variable [for block] [for process]
setpri Change the priority of a process
shell invoke shell
sigs List information about signals
sleep sleep a while
spi SPI driver test interface
ss Show maximum process stack usage
start start process/block
startapp start application <program>
stop stop process/block
subsc Lists all subscriptions.
sv ChannelSupervision test interface
tc TempCompensation driver test interface
te Trace & Error Handling commands
term display info about terminal
timezone configure RTC with timezone data
tpa Access to the TPA Unit Interface
tr Access to the CDCI-TR Interface
trx Access to the trxLib command interface
tsh Test Shell
uic UIC interrupt information.
uic2 UIC2 or UIC3 interrupt information.
unsetenv remove environment variables [from block] [from process]
uptime display system uptime
vddc Vdd Compensation test interface
vii Displays current LED request. 'vii d' gives more details
warp Warp driver test interface
who list who is logged on
xpp XPP test interface
$ $