Transcoder Devices

[milan_recj]

During Peak Time in my E******* BSC R07B, the transcoder devices (RRTPP:TRAPOOL=ALL) are almost reaching the threshold.
Can anyone guide what factors effecting the congestion and the steps to modify it.

[roloramos]

Do you have any printout ??
Is possible that you need to modify the distribution for the transcoder device (%) in the BSC according with the Cell chennels.

[milan_recj]

I have modified some of the devices from FR to HR.

Is there any certain criteria to follow for the distribution of devices?

[jamal]

Just follow the traffic behavior.
Change codec to which codec used very high. eg: FR -> HR.
And watch carrefully the amount of tra device which installed.

If you want, script to modify. Please give your mail address since I can't upload cause restriction in my office.

BR//JM

[milan_recj]

pls sen to milan_recj@hotmail.com

[aaa12345]

Is possible to change TRA device type automatically instead of Manually. you can the activation procedure below.

[roloramos]

I attached de DT file for an BSC expantion

And the typical disttribution that we have used...

TRAPOOL DEVICES
FR 24
EFR 72
AMR_HR 1128
AMR_FR 2616
Total 3840

[ekamal]

Dear,

As mentioned, Self Configuring Transcoder Pools (SCTP) is very useful feature for automatic re-configuration of your transcoder pool devices according to your traffic and the SCTP parameters that you will set for this feature(i.e, after activation, some parameters you need to set their values carefully, TTRAEX, TTRAREQ, and MINPOOLSIZE, for each pool using RRPSC command) .

You need to activate SCTP feature in your TRC, also FMX feature in the OSS.

I already have one thread about this topic, kindly download the activation procedure from here:

http://www.finetopix.com/showthread.php?23961-Activation-procedure-for-Self-Configuring-Transcoder-Pools-Manager-%28SCTPM%29&p=156436&highlight=#post156436


BR
ekamal

[milan_recj]

my BSC/TRC does not support self config of transcoder pool devices. Any other way to increase it.

[consultant]

add new TRA boards and load DT according expansion config