View Full Version : Help Automatic detect k800i with tems
abhye_x
2011-10-14, 05:27 AM
Dear masters,
Help, I cant automatic detect my phone (K800i) to tems 8.0.4. i dont know what is the problem. But if i added the phone it could connect manually and run normally.
Anyone knows how to detect automatic the phone.
Best Regard
itking
2011-10-17, 08:26 AM
you are running on a *****ed version of tems 8.0.4 and there is always limitation [for such versions]..............your ***** might not support to detect k800i automatically
seedweb
2011-10-17, 01:54 PM
Dear masters,
Help, I cant automatic detect my phone (K800i) to tems 8.0.4. i dont know what is the problem. But if i added the phone it could connect manually and run normally.
Anyone knows how to detect automatic the phone.
Best Regard
Maybe you should upgrade your tems version!
abhye_x
2011-10-17, 03:08 PM
Maybe you should upgrade your tems version!
Dear,
Im using windows seven 32b, to what version should i upgrade?
Thanks
dew4noberic
2011-10-17, 03:44 PM
Maybe you need the correct driver for your phone, some time it happen to me, went i was wrong using driver K800 for tems 9 or 10, it not automatically detect and event can't connect to tems 8
gesang
2011-10-18, 01:57 AM
just like dew4noberic (http://www.finetopix.com/members/dew4noberic.html) said, it might be incorrect driver or improper driver installation.
my suggest is uninstall all of your k800i driver ( open device manager ). and then connect your k800i device ( one by one ) and let your computer install the driver ( it can be automatically or in my experience it should be done manual ). if success, it will be automatically detect by tems.
for no dongle needed version ( i used 8.0.3 ), it will be no problem for connecting devices such as k800i. but, it is a problem when we try to connect modems. and it also can't be used for 3G systems drivetesting, no record for CPICH and ECNO. CMIIW
good luck
dew4noberic
2011-10-18, 07:59 AM
if you need to connect for modem, just used 8.0.4 that for update modem list, not all modem can't connect to tems.
itking
2011-10-18, 05:41 PM
just like dew4noberic (http://www.finetopix.com/members/dew4noberic.html) said, it might be incorrect driver or improper driver installation.
my suggest is uninstall all of your k800i driver ( open device manager ). and then connect your k800i device ( one by one ) and let your computer install the driver ( it can be automatically or in my experience it should be done manual ). if success, it will be automatically detect by tems.
for no dongle needed version ( i used 8.0.3 ), it will be no problem for connecting devices such as k800i. but, it is a problem when we try to connect modems. and it also can't be used for 3G systems drivetesting, no record for CPICH and ECNO. CMIIW
good luck
dear friend......................we can see 3G CPICH RSCP and EC/No but can not see other parameters under HSDPA analysis and HSUPA analysis (in most cases) in TI 8.0.3
dear friend......................we can see 3G CPICH RSCP and EC/No but can not see other parameters under HSDPA analysis and HSUPA analysis (in most cases) in TI 8.0.3
your modem may not be supported by TI8.0.3
D33T0X
2011-10-23, 07:40 PM
You'll have this kind of issues when the device driver is not corresponding to used version of TEMS. My advice - find the UE Driver CD distributed with the version of TEMS you are using, re-install teh phone and try again. If that doesn't work then the ***** doesn't support automatic connect.
abhye_x
2011-11-03, 10:27 AM
You'll have this kind of issues when the device driver is not corresponding to used version of TEMS. My advice - find the UE Driver CD distributed with the version of TEMS you are using, re-install teh phone and try again. If that doesn't work then the ***** doesn't support automatic connect.
With the same installer and med i use on my friends notebook, it works with the automatic detect on my k800i..
I already clean the hasp key and the registry but always couldnt detect automatic.
Or maybe i should try another installer and med.
Thanks and best regard
TEMS_Engineer
2011-11-03, 10:04 PM
With the same installer and med i use on my friends notebook, it works with the automatic detect on my k800i..
I already clean the hasp key and the registry but always couldnt detect automatic.
Or maybe i should try another installer and med.
Thanks and best regard
i think the problem become form your install wrong driver
Please carefully about driver of TEMS inv V10 and V8.0.4
Thanks
capcipcup
2011-11-04, 11:21 AM
try with this driver for 8.0.4
duongha86
2011-11-04, 02:54 PM
I have same problem, after use with Tem 9.0.4
Tks all for your support
TEMS_Engineer
2011-11-06, 10:53 AM
I have same problem, after use with Tem 9.0.4
Tks all for your support
Hi
Please detial your problem
thanks
gsmman2006
2012-02-23, 04:49 AM
Please download last version of PCSuite and install that , now TEMS can detect phones automatics.
ching2-o
2012-02-23, 11:57 AM
Please download last version of PCSuite and install that , now TEMS can detect phones automatics.
TEMS 10 above versions, you can use latest driver available and can autodetect these phones. But if you are using TEMS 9 below, better use capcipcup attached driver, rollback new driver and update with that one, then you will have no problem for auto detection for below tems version like tems 9 to tems 8.0.4.
captain_jejemon
2012-02-23, 12:20 PM
try to use UE description from tems 10 or higher.
just copy paste
Hi everybody, anyone knows if it is possible to connect Blackberry to TEMS?
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.