PDA

View Full Version : FANGROUP ALARM REMOVAL


parshav
2011-09-10, 02:09 PM
HI,
Pls tell me how to remove fangroup alarm.


SpecificProblem
FanGroup_Disconnected

ObjectOfReference

RootMo,SubNetwork=RABD201,MeContext=ABD197,ManagedElement=1,Equipment=1,Cabinet=1,FanGroup=3

RootMo,SubNetwork=RABD201,MeContext=ABD197,ManagedElement=1,Equipment=1,Cabinet=1,FanGroup=4

THis alarm comes on RBS6201.

physically all fan working but I dont know how this alarm comes .

one more thing I like to share is there 6202 cabinet or equipment script had run on this cabinet during integration which cause this problem...????
Abuelooorl
2011-09-11, 06:21 AM
May the climate not beign defined as "Extended"?

RBS6201 must configured that way. Climate: Extended (at least in the DCS configuration).

Is there only 3G or does it have DCS also?
parshav
2011-09-11, 02:11 PM
May the climate not beign defined as "Extended"?

RBS6201 must configured that way. Climate: Extended (at least in the DCS configuration).

Is there only 3G or does it have DCS also?
Tnxs dear,

Climate system is defined as Extended already.What is DCS systme??? Pls tell me...
Abuelooorl
2011-09-11, 07:07 PM
Tnxs dear,

Climate system is defined as Extended already.What is DCS systme??? Pls tell me...

DCS is GSM 1800. You can implement both technologies within the same rack.
parshav
2011-09-11, 07:46 PM
DCS is GSM 1800. You can implement both technologies within the same rack.
Hi ABULOOORL,


There is GSM900 and WCDMA2100 & GSM900 both technology implemented in the same rack.
Abuelooorl
2011-09-12, 04:57 AM
Hi ABULOOORL,


There is GSM900 and WCDMA2100 & GSM900 both technology implemented in the same rack.

Hi. You can implement any combination of 900+1800+2100+2600 in the RBS6201.

We use to define alarms in DCS system (IDB on DUG 20, 900 or 1800 system) but you seem to define them in the WCDMA DUW.

You can check if that alarms are defined only in one system or both GSM&WCDMA. Maybe is a redundant or undefined alarm in both systems...

Hope this helps...
jamal
2011-09-23, 12:01 PM
Dear Mate,

Are already check cable that connecting SHU and SCU (that control the fan)?
Is the fan working on High Speed or In Low speed.
May there lost connection?

CMIIW,
JM