PDA

View Full Version : Paging



Dinesh
2011-08-20, 03:28 PM
How do we improve the paging performencw

s52d
2011-08-20, 04:31 PM
How do we improve the paging performencw

1. Do you have paging congestion? Check LA sizes + stats

2. If you have 2g/3g network, introduce comon LA

3. check time between pages. Sometimes it is too short

4. Make sure pages are send over the air several times
(some vendors cells send pages twice, if there is capacity)

5. reduce unneeded pages from SMSc to unreachable terminals

6. check formulas: it should be (Answer_to_page1+answer_to_page2)/nr_of_page1

7, introduce Gs or DTM on BSS

8. increase hysteresis for idel mode cell change

Assuming you do not have some misconfiguration in the network, of course.

BR
s52d

Dinesh
2011-08-21, 03:53 AM
Thax Mike...
but pls tell me how to check the " time between the pages"

Dinesh
2011-08-21, 03:55 AM
how to check the time between pages in E******* MSC

gencerali
2011-08-21, 07:21 AM
Multiple CCH also increases paging performance..

linhhy
2011-08-21, 10:04 PM
how to check the time between pages in E******* MSC

Pls check the timer: PAGTIMEFRST1LA

dodotiro
2011-10-19, 12:06 PM
is there any relation between PCH Re-activation with PDP cut off ?

iara
2011-10-19, 12:46 PM
1. Do you have paging congestion? Check LA sizes + stats

2. If you have 2g/3g network, introduce comon LA

3. check time between pages. Sometimes it is too short

4. Make sure pages are send over the air several times
(some vendors cells send pages twice, if there is capacity)

5. reduce unneeded pages from SMSc to unreachable terminals

6. check formulas: it should be (Answer_to_page1+answer_to_page2)/nr_of_page1

7, introduce Gs or DTM on BSS

8. increase hysteresis for idel mode cell change

Assuming you do not have some misconfiguration in the network, of course.

BR
s52d

how to check Paging Congestion?
How to find unneeded pages from SMSc?

s52d
2011-10-19, 01:02 PM
how to check Paging Congestion?
How to find unneeded pages from SMSc?

Depends on vendor.
E/// has BSS statistics showing paging congestion on different parts of BSS
(BSC, RBS). You can see paging status of the cell with OMT as well.
(we use this to select combined or non-combined BCCH).

SMS: retry scheme as set in SMSC. SMS stats. SS7 monitoring equipment.
We failed to learn it from E/// MSC stats: years ago we did with special patch in the MSC,
and half of unanswered pages were generated by SMSc.

BR
s52d

zeldalcl
2011-10-19, 01:20 PM
use the dbtsp:tap=... to check time beetween to page