View Full Version : RBS 6000 configuration
bashar0002
2011-07-15, 06:22 AM
good day
please i need to know how to configure the RBS 6102 ( DUG with 6 RUS )
with the full configuration 8-8-8
Yaaqob1982
2011-09-23, 03:12 AM
good day
please i need to know how to configure the RBS 6102 ( DUG with 6 RUS )
with the full configuration 8-8-8
plz brother if you knew how to config ...plz let me know
i wish you support with print screen
thanks bashar
jamal
2011-09-23, 12:11 PM
good day
please i need to know how to configure the RBS 6102 ( DUG with 6 RUS )
with the full configuration 8-8-8
Dear Mate,
You can find how to configure RBS 6000 with DUG+RUS below
http://www.finetopix.com/e*******/19791-configuring-rbs-6201-gsm-rus.html
jamal
2011-09-23, 12:12 PM
Dear Mate,
You can find below:
http://www.finetopix.com/e*******/19791-configuring-rbs-6201-gsm-rus.html
hooby
2011-09-26, 02:07 PM
As long as i know you should use 3 DUGs, each for every sector, because one dug can manage up to 12 careeers, so if you want to configure 8+8+8 you should do it this way, i think.
Cambaling
2011-10-12, 06:56 PM
Jamal,
Thanks for your share, please your password
Cheers
Cambaling
LaserSport
2011-10-13, 02:21 AM
I did'n understand why 6 RU's...but if the solution is 6 radios you may combine 2 RUS externaly by sector, but of course you will loose about 3dBm with this.
Regards
aaa12345
2011-10-13, 06:01 AM
for 8+8+8 , it is needed to 2 DUG, and 6RUS. Due to each DUG can support up to 12 trx, for 8+8+8:
config first DUG(MAster) for config 8+4
Config second DUG(Slave) for config 4+8
Sync cable must be used between Master and Slave DUGs.
in BSC:
create first and third sector with config 8
create second sector with 2 chgrs( For example:2,3)
connect first TG to chgr2 and second TG to chgr3.
Yaaqob1982
2011-10-13, 08:10 AM
for 8+8+8 , it is needed to 2 DUG, and 6RUS. Due to each DUG can support up to 12 trx, for 8+8+8:
config first DUG(MAster) for config 8+4
Config second DUG(Slave) for config 4+8
Sync cable must be used between Master and Slave DUGs.
in BSC:
create first and third sector with config 8
create second sector with 2 chgrs( For example:2,3)
connect first TG to chgr2 and second TG to chgr3.
plz brother, i have 2 sectord RUS 900(4+4), 1800 (8+8) with 2 DUGs
plz let me know how can configure this cabinet. support discription with OMT print screen or created IDB for each DuG
aaa12345
2011-10-13, 02:07 PM
it is simple,use each DUG for config 4(900)+8(1800)
4shared folder - My 4shared (http://www.4shared.com/folder/q5izzdX0/_online.html)
SolMX
2011-10-14, 06:14 AM
Probably this is not the right thread but, where can I find the description of each alarm displayed by the RBS 6000? it's a 3G BST.
Thank you.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.