PDA

View Full Version : Question tetra site failsoft



dsulistyo
2011-07-02, 10:41 AM
dear all,

we have problem on MTS2...they are site failsoft problem.
what should we do?

below captured logfile from MTS BTS Test..

SC) status sc

Overall Status: Active - ENABLED_NON_SYNC / 1PPS_LOST
BTS type: MTS2
Site Status: No Trunking - Site Failsoft (SecurityClass1)
Internal State: AS_U_E_IDL_SHUTDOWN
Site Link State: UP
Netcom Primary: ACTIVE_S
Netcom Secondary: STANDBY_S
Position ID: A
Internal Temp: 29.63 DegC (Alarm at: 70.0 DegC)

SC) status bts
Subsystem : State : Severity
---------------------------------------------------------
MTS (31) No Trunking CRITICAL
SCREF ( 7) Enabled non-sync Normal
SCINT ( 2) Normal Operation Normal
SCPORT ( 2) Normal Operation Normal
BRMTS nr 1 ( 3) Disabled CRITICAL
BRMTS nr 2 ( 3) Disabled CRITICAL
BRINT nr 1 ( 2) Normal Operation Normal
BRINT nr 2 ( 2) Normal Operation Normal
BRREC nr 1 ( 2) Normal Operation Normal
BRREC nr 2 ( 2) Normal Operation Normal
BRTRANS nr 1 ( 6) VSWR Standing Wave Prob. Minor
BRTRANS nr 2 ( 6) VSWR Standing Wave Prob. Minor
BRPORTS nr 1 ( 2) Normal Operation Normal
BRPORTS nr 2 ( 2) Normal Operation Normal
DPMINT nr 1 ( 2) Normal Operation Normal
DPMSIG nr 1 ( 2) Normal Operation Normal
PSU nr 1 ( 4) PSU Input Fault CRITICAL
FAN nr 1 ( 2) Normal Operation Normal

dsulistyo
2011-07-05, 09:26 AM
does anybody can answer my question?