Rx Level Abnormal values

[kermani]

Hi guys,
In Tems DT I've found an Rxlevsub value=-124 dbm, does any body met this?

[salmeterol]

have serving + neighbors all -124 dBm? or only serving cell has -124? or only for neighbors?

when i was taking a test, i had a problem like this.

Serving cell + neighbor's rxlevsub values suddenly goes to -124 dBm, and gone drop without countdown.

Problem was originated from tems phone and also softwafe. don't worry this problem is not related with sites..

:-)

[telecom.santosh]

May be your mobile is in UMTS mode.

[kermani]

no no, tems equipment is sane,only in a specefic time slots of one site i've that.

[Piscean21]

We experienced -125 levels for serving + all the neighbors. Later on it was found to be faulty Tems Handset.

[kermani]

The problem is only for serving cell (not all the seven time slots) and not the neighbors cells
I have suspected that the tems may cause that too but when i moved to another site everything was good, but moving back to the first site the problem appear again .

[jan74]

The problem is only for serving cell (not all the seven time slots) and not the neighbors cells
I have suspected that the tems may cause that too but when i moved to another site everything was good, but moving back to the first site the problem appear again .

This sounds to me like dodgy hardware on the cell in question. Its possible that some timeslots are dodgy. If you only see this on once cell, I would have it reset forst and then I would have it checked by a Field Eng. I havent seen this in 3G beofre but I have seen it happen on GSM.

[kermani]

I've suspected that too.
Thx guys