igorok78
2011-05-26, 05:46 PM
Hello! To your attention I put here the Siemens GSM Course (http://www.4shared.com/folder/BCJX-0vo/_online.html), consisting in the following parts:
1. 23295351-01-Mn1789eu11mn-0001-Channel configuration and allocation strategy
Contents
1 Channel configuration overview 3
1.1 Control channel configuration 13
1.2 Dedicated channel 14
1.3 Smooth Channel Modification 16
1.4 Random access channel 21
1.5 Paging / access grant and notification channel 28
1.6 CCCH load 29
1.7 Additional ASCI service related parameters 32
2 Extended channel mode 37
3 Adaptive Multirate AMR 41
4 Channel allocation strategy 55
4.1 Basic 56
4.2 Multi Service Layer Support 58
4.3 Database parameters 63
5 Exercises 65
6 Solutions 77
2. 23616077-02-Mn1789eu11mn-0001-Radio-Link-Failure
Contents
1 Radio link failure procedure 3
2 Radio link failure warning procedure 4
3 Parameters for radio link failure 6
4 Exercise 7
5 Solution 11
3. 23616119-03-Mn1789eu11mn-0001-Design-Radio-Cells
Contents
1 Design of radio cells 3
2 Cell selection/reselection 5
2.1 Cell selection 6
2.2 Cell reselection 10
3 Handover 27
3.1 General notes on handover 28
3.2 Measurement preprocessing 35
3.3 Measurement reporting and neighbor cell book-keeping 42
3.4 Threshold comparisons and handover detection algorithms 47
3.5 Target cell list generation 68
3.6 Handover signaling and timer 71
4 Handover types 75
4.1 Handover types belonging to radio criteria 76
4.2 Compression/Decompression HO Improvements 84
4.3 Handover types belonging to network criteria 87
4.4 Service dependent handover management 112
4.5 AMR-handover 115
5 Exercises 123
6 Solutions 131
4. 23616131-04-Mn1789eu11mn-0001-Hierarchical-Cell-Structure
Contents
1 Introduction 3
2 Mobile Speed Sensitive Handover 11
3 Priority Layer 21
4 Exercises 29
5 Solutions 35
5. 23616144-05-Mn1789eu11mn-0001-Gsm-Umts-Inter-Working
Contents
1 Introduction 3
1.1 Cell reselection from GSM to UMTS 6
1.2 Database Parameters 8
2 Handover from GSM to UMTS 9
2.1 Basics 10
2.2 SBS implementation 12
2.3 GSM to UMTS Handover Types 14
2.4 Generation of target cell list 20
2.5 Database parameters 24
2.6 Restrictions 28
6. 23616180-06-Mn1789eu11mn-0001-Interference-Reduction
Contents
1 Power control 3
1.1 Objectives 4
1.2 Measurement preprocessing for power control 6
1.3 Power control decision 9
1.4 Power control execution 14
1.5 Power control for AMR calls 23
1.6 Service dependent power control 24
2 Network Synchronization 29
2.1 Objectives 30
2.2 Realization in the SBS 30
3 Frequency hopping 39
3.1 Introduction 40
3.2 Frequency hopping systems applied in SBS 46
4 Discontinuous Transmission DTX 65
5 Uplink Interference Cancellation 69
6 Channel allocation due to interference level 77
7 Exercises 83
8 Solutions 91
Actually, this course is old (2005) and very connected with Siemens Parameters Set, so it can be useless for main part of this site visitors. But at the same time, it explains the phisics of using the parameters, and the corresponding processes.
I have check this course here and didn't find it. I hope I do not double someone's topic. If so, please, let me know and I will ask admin to delete this topic.
Have a good studing!
1. 23295351-01-Mn1789eu11mn-0001-Channel configuration and allocation strategy
Contents
1 Channel configuration overview 3
1.1 Control channel configuration 13
1.2 Dedicated channel 14
1.3 Smooth Channel Modification 16
1.4 Random access channel 21
1.5 Paging / access grant and notification channel 28
1.6 CCCH load 29
1.7 Additional ASCI service related parameters 32
2 Extended channel mode 37
3 Adaptive Multirate AMR 41
4 Channel allocation strategy 55
4.1 Basic 56
4.2 Multi Service Layer Support 58
4.3 Database parameters 63
5 Exercises 65
6 Solutions 77
2. 23616077-02-Mn1789eu11mn-0001-Radio-Link-Failure
Contents
1 Radio link failure procedure 3
2 Radio link failure warning procedure 4
3 Parameters for radio link failure 6
4 Exercise 7
5 Solution 11
3. 23616119-03-Mn1789eu11mn-0001-Design-Radio-Cells
Contents
1 Design of radio cells 3
2 Cell selection/reselection 5
2.1 Cell selection 6
2.2 Cell reselection 10
3 Handover 27
3.1 General notes on handover 28
3.2 Measurement preprocessing 35
3.3 Measurement reporting and neighbor cell book-keeping 42
3.4 Threshold comparisons and handover detection algorithms 47
3.5 Target cell list generation 68
3.6 Handover signaling and timer 71
4 Handover types 75
4.1 Handover types belonging to radio criteria 76
4.2 Compression/Decompression HO Improvements 84
4.3 Handover types belonging to network criteria 87
4.4 Service dependent handover management 112
4.5 AMR-handover 115
5 Exercises 123
6 Solutions 131
4. 23616131-04-Mn1789eu11mn-0001-Hierarchical-Cell-Structure
Contents
1 Introduction 3
2 Mobile Speed Sensitive Handover 11
3 Priority Layer 21
4 Exercises 29
5 Solutions 35
5. 23616144-05-Mn1789eu11mn-0001-Gsm-Umts-Inter-Working
Contents
1 Introduction 3
1.1 Cell reselection from GSM to UMTS 6
1.2 Database Parameters 8
2 Handover from GSM to UMTS 9
2.1 Basics 10
2.2 SBS implementation 12
2.3 GSM to UMTS Handover Types 14
2.4 Generation of target cell list 20
2.5 Database parameters 24
2.6 Restrictions 28
6. 23616180-06-Mn1789eu11mn-0001-Interference-Reduction
Contents
1 Power control 3
1.1 Objectives 4
1.2 Measurement preprocessing for power control 6
1.3 Power control decision 9
1.4 Power control execution 14
1.5 Power control for AMR calls 23
1.6 Service dependent power control 24
2 Network Synchronization 29
2.1 Objectives 30
2.2 Realization in the SBS 30
3 Frequency hopping 39
3.1 Introduction 40
3.2 Frequency hopping systems applied in SBS 46
4 Discontinuous Transmission DTX 65
5 Uplink Interference Cancellation 69
6 Channel allocation due to interference level 77
7 Exercises 83
8 Solutions 91
Actually, this course is old (2005) and very connected with Siemens Parameters Set, so it can be useless for main part of this site visitors. But at the same time, it explains the phisics of using the parameters, and the corresponding processes.
I have check this course here and didn't find it. I hope I do not double someone's topic. If so, please, let me know and I will ask admin to delete this topic.
Have a good studing!