WiMAX Interference - Ant Beamwidth

[MyVi78]

Fellow members,

If there's anyone of you involved in WiMAX, may I know what are the Ant beamwidths being used in your operators' network?

ALU for example deployed 120 Deg, which is giving me a huge headache due to sidelobe interference.

Would appreciate your feedbacks.

[dimooon11]

Hello,

we're using 90deg antennas
what permutation scheme and frequency reuse on your network?

[engaom]

we are using also 90 degrees antennas, but we also faced some internal interferenece issues which causes no network entry...and solved by change frequencies

[blueee]

Fellow members,

If there's anyone of you involved in WiMAX, may I know what are the Ant beamwidths being used in your operators' network?

ALU for example deployed 120 Deg, which is giving me a huge headache due to sidelobe interference.

Would appreciate your feedbacks.


Experience in using 65 deg before. 3 sectors, each 10MHz.
Some location are even interfere by other operators which the split over of the side lobe which not cut off sharply. No guard band between the operators.

[rocketfire]

4sectors x 90° and 3 sectors x 60°, you can experience problems when tilt is too high, should be interesting compare different antenna patterns on a RF simulation tool.