View Full Version : MOTOLROLA BTS,BSC,PCU,TRANSCODER
mandeel2010
2011-05-15, 12:34 AM
Hi
Any one need help on ******** bss i can share here, htanks
jimjim
2011-05-15, 07:13 AM
Hello dudes,
I am also available for help.
:)
koepret
2011-05-15, 09:01 AM
Hi
Any one need help on ******** bss i can share here, htanks
no need to ask , if want to share what you have about telecommunication, you can share it :) ,
i think that is not good way to make thread only to ask member in this forum :(
if you share more , you can get more that is my experience in this forum :)
mandeel2010
2011-05-15, 08:50 PM
Hi
This is the calibration steps for motorolla BTS HOROZIN II
Password is Garfield
cs2000
2011-05-26, 11:54 AM
hi guys!
i would need some help on how to produce network dump on ******** bsc gsr9.
• GSM Cell Parameter Export
• GSM Neighbour Export
• GSM UTRAN Relation Export
thanks in advance!
jimjim
2011-05-28, 10:22 AM
Hello there,
For cell parameter, you can use teh command disp_cell (Check help for more details).
In this output neighbour parameters should appear.
:)
Regards,
Hi,
Anyone knows how to check the calibration data of the radio (DRI) if it is correctly calibrated or not.
Thank you.
jimjim
2011-05-30, 06:56 PM
Hello there,
Use the following command,
disp_cal_data site_id dri_id
The collected output should show almost the same values in hexadecimal.
Regards,
:)
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.