View Full Version : E******* link errors
al_nabhani
2011-05-06, 11:15 PM
Dears,
could you please anyone explain for us how we can check link errors in E******* oss using command every 15mins or hourly
sabila
2011-05-07, 12:03 AM
may you can use filter alarm with heartbeat failure to check it :D
make it enable on OSS setting, before take to default value it could'nt be on 15s supervise, notice on load of equipment due to this action
al_nabhani
2011-05-07, 02:26 PM
I found this command
DTQHI:dip=rblt45; This command initiates historical storage of quality data for one or several DIPs.Upto 16 DIPs can be specified in each command.
The order does not remain after system restart.
dtqdp:dip=rblt45; This command prints the historical quality data for the specified digital path.
Answer printout DIGITAL PATH HISTORICAL STORAGE QUALITY DATA is received.Only one DIP can be specified in each command.
The order does not remain after system restart.
Print out of dtqdp:dip=rblt45;
SDATE STIME EDATE ETIME N-ES N-SES N-UAS N-UAV SMI
110506 0000 110507 0000 0 0 0 0 0
110507 0000 110507 0939 0 0 0 0 0
OUTGOING DIRECTION DEGRADED PERFORMANCE
SDATE STIME EDATE ETIME F-ES F-SES F-UAS F-UAV SMI
110506 0000 110507 0000 0 0 0 0 0
110507 0000 110507 0939 1 1 0 0 0
UNACCEPTABLE PERFORMANCE MEASUREMENTS PERIOD
SDATE STIME EDATE ETIME
110507 0530 110507 0939
INCOMING DIRECTION UNACCEPTABLE PERFORMANCE
DATE STIME ETIME N-ES N-SES N-UAS N-UAV SMI
110507 0915 0930 0 0 0 0 0
110507 0930 0939 0 0 0 0 0
OUTGOING DIRECTION UNACCEPTABLE PERFORMANCE
DATE STIME ETIME F-ES F-SES F-UAS F-UAV SMI
110507 0915 0930 0 0 0 0 0
110507 0930 0939 0 0 0 0 0
END
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.