What do you think about this license

[essalvador]

Hi,

Pls give your remarks about this license of NodeB of Huawei, if something is wrong tell it:


NodeB License
-------------
Operator Index = 0xffff
Operator Name = Shared
Downlink Frequencies = Unlimited frequency
License Status = Legal license
Max Uplink CE = 128
Max Downlink CE = 16
Max Local Cell = 3
HSDPA Function = Yes
Max HSDPA User = Unlimited
HSDPA RRM Package1 = Yes
Max HS-PDSCH Code Number = 15
MBMS Function = Yes
HSUPA Function = Yes
PA Sharing Function = Yes
HSUPA TTI Function = Yes
CCPIC Function = Yes
DYNAMIC CE = Yes
DYNAMIC Voltage = Yes
Number of local cells supporting DL 64QAM = 1
Number of local cells supporting MIMO = 0
Number of local cells supporting FDE = 0
Number of local cells supporting IC = 0
Number of local cells supporting UL 16QAM = 6
Number of local cells supporting UL L2 Improvement = 6
Number of local cells supporting 64QAM+MIMO = 0
Number of local cells supporting DC = 6
Number of local cells supporting MIMO+HSDPA = 0
Local Cell Number in 430(0.1dBm) = 3
Multi-Mode BTS TS = No
Ethernet Syn = Yes
IP Clock Function = Yes
Multi-Mode BTS = No
GSM/UMTS Dual Mode Sector = Unlimited
Flexible frequency separation between G/U = Unlimited
PSU Intelligent Shutdown Capability = No
Multi-mode Dynamic Power Sharing = Unlimited
Bandwidth sharing of MBTS Multi-mode Co-Transmission = Unlimited

Emergency NodeB License
-----------------------

Emergency License Set Status = Unset


Best regards.

[agenov]

Hi,

Pls give your remarks about this license of NodeB of Huawei, if something is wrong tell it:


NodeB License
-------------
Operator Index = 0xffff
Operator Name = Shared
Downlink Frequencies = Unlimited frequency
License Status = Legal license
Max Uplink CE = 128
Max Downlink CE = 16
Max Local Cell = 3
HSDPA Function = Yes
Max HSDPA User = Unlimited
HSDPA RRM Package1 = Yes
Max HS-PDSCH Code Number = 15
MBMS Function = Yes
HSUPA Function = Yes
PA Sharing Function = Yes
HSUPA TTI Function = Yes
CCPIC Function = Yes
DYNAMIC CE = Yes
DYNAMIC Voltage = Yes
Number of local cells supporting DL 64QAM = 1
Number of local cells supporting MIMO = 0
Number of local cells supporting FDE = 0
Number of local cells supporting IC = 0
Number of local cells supporting UL 16QAM = 6
Number of local cells supporting UL L2 Improvement = 6
Number of local cells supporting 64QAM+MIMO = 0
Number of local cells supporting DC = 6
Number of local cells supporting MIMO+HSDPA = 0
Local Cell Number in 430(0.1dBm) = 3
Multi-Mode BTS TS = No
Ethernet Syn = Yes
IP Clock Function = Yes
Multi-Mode BTS = No
GSM/UMTS Dual Mode Sector = Unlimited
Flexible frequency separation between G/U = Unlimited
PSU Intelligent Shutdown Capability = No
Multi-mode Dynamic Power Sharing = Unlimited
Bandwidth sharing of MBTS Multi-mode Co-Transmission = Unlimited

Emergency NodeB License
-----------------------

Emergency License Set Status = Unset


Best regards.


Too small number of DL CEs .... don't u have congestion problem?

BR

[essalvador]

Too small number of DL CEs .... don't u have congestion problem?

BR

Hi, this network is not used yet,

The CE DL number is about how ?

BR.

[agenov]

Hi, this network is not used yet,

The CE DL number is about how ?

BR.


It really depends on your traffic load. 1 CE will consume one AMR call in DL/UL. So for 16 you can not have more than 18 max users since DL CEs will be limitation factor in this case and we are not talking about any R99 PS in DL that consumes much more traffic depending on the rate...You have to do some initial dimensioning/evaluation...not an easy task. The most of the CEs are consumed for UL because of HSUPA but for sure this number in DL is quite low.

BR

[essalvador]

It really depends on your traffic load. 1 CE will consume one AMR call in DL/UL. So for 16 you can not have more than 18 max users since DL CEs will be limitation factor in this case and we are not talking about any R99 PS in DL that consumes much more traffic depending on the rate...You have to do some initial dimensioning/evaluation...not an easy task. The most of the CEs are consumed for UL because of HSUPA but for sure this number in DL is quite low.

BR

Thx for answer, i will check with vendor to buy licenses for CE DL.

Another question we can pass the voice over HSDPA and not R99 ? have you test it Pls ?

BR

[RFDude_PMA]

Dude

You dont have GSM? With the HSDPA Users unlimited is best to carry only PS in 3G and let CS to GSM.

[kilisuci_kdr]

Thx for answer, i will check with vendor to buy licenses for CE DL.

Another question we can pass the voice over HSDPA and not R99 ? have you test it Pls ?

BR
Agree with agenov.
You should ask the BSS team to add more WBPP board to increase your CE number.

[agenov]

Thx for answer, i will check with vendor to buy licenses for CE DL.

Another question we can pass the voice over HSDPA and not R99 ? have you test it Pls ?

BR


Yes, there is such optional RAN feature provided by Huawei but honestly never test it. if you have some observation of this functionality please share with us....


All the best

BR
Alex

[riyantoyadi]

Actually : if you past voice into HSDPA rather than R99, it's mean more resource will be uses more higher that could make some low throghput on HSDPA. Better you minimalized this except user in MULTIRAB. Thanks to Huawei that make efficiency with CE, special CE only dedicated to HSDPA that separeted BBU with user R99, if normal condition (not on very load traffic), CE utilization very safe.

[zeezzoo]

dears ,

can you tell me how can i extract this license from node B ?
and also if possible from RNC ?

[ksillas]

Hi zeezzoo,

nodeB license can be viewed executing DSP LICENSE mml command on the nodeB of your interest. You can see also this information from License --> NodeB License Management M2000 menu.

For RNC, try CHK LICUSAGE (i don't remember now for sure, but try and follow the autocompletion suggestion)

Best regards,
Juanjo

[_lisi4king]

DSP LICENSE - for RNC :)